hmSystemTime
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.1.1.30
Object
Time measured in seconds since 00:00:00 UTC, January 1, 1970. The clock of the agents may be set using this variable. Changing this variable on one agent automatically updates the value on the other agents in the same chassis.
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.1.1.30- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hmSystemTable
- Siblings
- 43
Syntax
SNMPv2-SMITimeTicks
- Source
- SNMPv2-SMITimeTicks
- Base type
Unsigned32
Values & Constraints
Object Constraints
range: 0-1000000000
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmSysProduct Manufacturer-defined product identifier. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.1 |
| hmSysModuleTable This table contains variables for a closer description of a
module. | table | - | .1.3.6.1.4.1.248.14.1.1.10 |
| hmInterfaceExtTable This table contains variables for each interface of
the switch. | table | - | .1.3.6.1.4.1.248.14.1.1.100 |
| hmInterfaceTable This table contains variables for each interface of
the switch. | table | - | .1.3.6.1.4.1.248.14.1.1.11 |
| hmTrunkTable This table contains variables for each trunk of
the switch. | table | - | .1.3.6.1.4.1.248.14.1.1.12 |
| hmSFPTable This table contains variables for each SFP. | table | - | .1.3.6.1.4.1.248.14.1.1.13 |
| hmSysBootVersion This value is a string that contains the version of the Bootcode | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.19 |
| hmSysVersion This value is a string that contains at least the
following data :
SW: Version number of software
CH: Version number of chassis
BP: Version number of backplane | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.2 |
| hmSysChassisName This displaystring represents the name of the Chassis.
Any change of this variable will cause an automatically
update of this value on each Basic Board in this Chassis. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.20 |
| hmSysStpEnable This variable controls the STP operation of the entire
switch. To control the STP function of each port use
hmIfaceStpEnable | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.21 |
| hmSysFlowControl enables or disables flow control for the switch unit. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.22 |
| hmSysBOOTPEnable Enable/Disable BOOTP operation. A (1) enables, a (2) disables.
When disabled, no BOOTPs are transmitted by the system.
When enabled, the system sends BOOTP requests at booting. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.23 |
| hmSysDHCPEnable Enable/Disable DHCP operation. A (1) enables, a (2) disables.
When disabled, no DHCPs are transmitted by the system.
When enabled, the system sends DHCP requests at booting. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.24 |
| hmSysTelnetEnable Enable/Disable Telnet operation. A (1) enables, a (2) disables.
When disabled, no Telnet sessions are allowed by the system. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.25 |
| hmSysHTTPEnable Enable/Disable HTTP connection. A (1) enables, a (2) disables.
When disabled, no HTTP is allowed by the system. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.26 |
| hmSysPlugAndPlay Enable/Disable Plug&Play feature. A (1) enables, a (2) disables.
if this variable is set to enable(1), special Plug&Play actions are
performed at boot time and after a successful … | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.27 |
| hmBcastLimiterMode Global configuration of feature broadcast limiter.
If enabled, for each port the maximum rate of broadcasts
can be specified. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.29 |
| hmSysGroupCapacity The hmSysGroupCapacity is the number of groups that can
be contained within the chassis. Within each managed
chassis/switch, the groups are uniquely numbered in the
range from 1 t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.3 |
| hmSystemTimeSource Shows the source of the system time. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.31 |
| hmSysStpBPDUGuardEnable This variable controls the BPDU Guard operation of the entire
switch (globally). To control the BPDU Guard function of each port use
hmIfaceStpBpduGuardEnable.
If BPDU guard func… | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.32 |
| hmSysSTPErrorNumber Advertised the reason why (R)STP could not be switched on.
Error reasons are coded as OR operation bit by bit, see values:
0x00 - no errors - (R)STP is switched on,
0x01 - (R)S… | scalar | Integer32 | .1.3.6.1.4.1.248.14.1.1.33 |
| hmSysSoftwareCapability This variable shows the capability of the running software.
The string is formated as follow:
Byte 1 : Always L (for Layer)
Byte 2 : 2 or 3 (dependend if the software supports on… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.34 |
| hmLEDGroup | node | - | .1.3.6.1.4.1.248.14.1.1.35 |
| hmDIPSwitchGroup | node | - | .1.3.6.1.4.1.248.14.1.1.36 |
| hmSysMaxTrunks Maximum number of trunks for this chassis. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.37 |
| hmLimiterGroup | node | - | .1.3.6.1.4.1.248.14.1.1.38 |
| hmSysUSBGroup | node | - | .1.3.6.1.4.1.248.14.1.1.39 |
| hmSysGroupMap This string represents the current configuration of the chassis,
encoded as an octet string. Each module is represented by a
single octet. If the value of a single octet is the as… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.4 |
| hmSysSwitchGroup | node | - | .1.3.6.1.4.1.248.14.1.1.40 |
| hmSysSelftestGroup | node | - | .1.3.6.1.4.1.248.14.1.1.41 |
| hmSysOEMGroup | node | - | .1.3.6.1.4.1.248.14.1.1.42 |
| hmSysMaxSignalContacts Maximum number of signal contacts for this chassis. Within
each managed chassis/switch, the groups are uniquely numbered
in the range from 1 to hmSysMaxSignalContacts. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.43 |
| hmSysHttpsEnable Enables/Disables HTTPS access to the device. A (1) enables, a (2) disables. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.44 |
| hmSysHttpsPortNumber The port number of the HTTPS web server. | scalar | Integer32 | .1.3.6.1.4.1.248.14.1.1.45 |
| hmSysSkipAcaOnBoot Enable/disable loading from ACA on startup. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.46 |
| hmSysConsoleServiceShellAdminState Admin State of service shell. (1=enable, 2=disable). | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.47 |
| hmSysHttpsCertFingerPrintType Controls HTTPS certificate fingerprint generation. If set to 'sha1' hmSysHttpsCertFingerPrint
will show the SHA1 fingerprint of the certificate. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.48 |
| hmSysHttpsCertFingerPrint The HTTPS certificate fingerprint as hash. The type of the hash is defined with hmSysHttpsCertFingerPrintType. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.49 |
| hmSysMaxPowerSupply Maximum number of power supplies for this chassis. Within
each managed chassis/switch, the groups are uniquely numbered
in the range from 1 to hmSysMaxPowerSupply. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.5 |
| hmSysMaxFan Maximum number of fans for this chassis. Within each managed
chassis/switch, the fans are uniquely numbered in the range
from 0 to hmSysMaxFan. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.6 |
| hmSysGroupModuleCapacity Maximum number of modules that an individual group can
contain in this system. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.7 |
| hmSysModulePortCapacity Maximum number of ports that an individual module can
contain in this system. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.8 |
| hmSysGroupTable This table contains variables for a closer description of
a group. | table | - | .1.3.6.1.4.1.248.14.1.1.9 |