hmSysStpBPDUGuardEnable

HMPRIV-MGMT-SNMP-MIB · .1.3.6.1.4.1.248.14.1.1.32
MIB view Table view

Object

scalar r/w Enumeration 
This variable controls the BPDU Guard operation of the entire
switch (globally). To control the BPDU Guard function of each port use
hmIfaceStpBpduGuardEnable. 
If BPDU guard functionality are global enabled (hmSysStpBPDUGuardEnable=enable(1)),
and BPDU guard are enabled per port (hmIfaceStpBpduGuardEnable=enable(1)) and (R)STP are globally enabled 
and an BPDU are received on the port, then hmIfaceStpBpduGuardStatus is set to true(1) for this port and 
IfAdminStatus is set to down(2) for this port.
Variable hmIfaceStpBpduGuardStatus can be reset (to their original values (=false)) with switching 
BPDU guard functionality globally off (hmSysStpBPDUGuardEnable=disable(2)).
IfAdminStatus can be again reset to to their original values up() only manually.
The default value of hmSysStpBPDUGuardEnable is disable(2).

Context

MIB
HMPRIV-MGMT-SNMP-MIB
OID
.1.3.6.1.4.1.248.14.1.1.32
Type
scalar
Access
readwrite
Status
current
Parent
hmSystemTable
Siblings
43

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hmSysProduct
Manufacturer-defined product identifier.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.1
hmSysModuleTable
This table contains variables for a closer description of a module.
table-.1.3.6.1.4.1.248.14.1.1.10
hmInterfaceExtTable
This table contains variables for each interface of the switch.
table-.1.3.6.1.4.1.248.14.1.1.100
hmInterfaceTable
This table contains variables for each interface of the switch.
table-.1.3.6.1.4.1.248.14.1.1.11
hmTrunkTable
This table contains variables for each trunk of the switch.
table-.1.3.6.1.4.1.248.14.1.1.12
hmSFPTable
This table contains variables for each SFP.
table-.1.3.6.1.4.1.248.14.1.1.13
hmSysBootVersion
This value is a string that contains the version of the Bootcode
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.248.14.1.1.19
hmSysVersion
This value is a string that contains at least the following data : SW: Version number of software CH: Version number of chassis BP: Version number of backplane
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.248.14.1.1.2
hmSysChassisName
This displaystring represents the name of the Chassis. Any change of this variable will cause an automatically update of this value on each Basic Board in this Chassis.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.248.14.1.1.20
hmSysStpEnable
This variable controls the STP operation of the entire switch. To control the STP function of each port use hmIfaceStpEnable
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.21
hmSysFlowControl
enables or disables flow control for the switch unit.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.22
hmSysBOOTPEnable
Enable/Disable BOOTP operation. A (1) enables, a (2) disables. When disabled, no BOOTPs are transmitted by the system. When enabled, the system sends BOOTP requests at booting.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.23
hmSysDHCPEnable
Enable/Disable DHCP operation. A (1) enables, a (2) disables. When disabled, no DHCPs are transmitted by the system. When enabled, the system sends DHCP requests at booting.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.24
hmSysTelnetEnable
Enable/Disable Telnet operation. A (1) enables, a (2) disables. When disabled, no Telnet sessions are allowed by the system.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.25
hmSysHTTPEnable
Enable/Disable HTTP connection. A (1) enables, a (2) disables. When disabled, no HTTP is allowed by the system.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.26
hmSysPlugAndPlay
Enable/Disable Plug&Play feature. A (1) enables, a (2) disables. if this variable is set to enable(1), special Plug&Play actions are performed at boot time and after a successful …
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.27
hmBcastLimiterMode
Global configuration of feature broadcast limiter. If enabled, for each port the maximum rate of broadcasts can be specified.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.29
hmSysGroupCapacity
The hmSysGroupCapacity is the number of groups that can be contained within the chassis. Within each managed chassis/switch, the groups are uniquely numbered in the range from 1 t…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.1.1.3
hmSystemTime
Time measured in seconds since 00:00:00 UTC, January 1, 1970. The clock of the agents may be set using this variable. Changing this variable on one agent automatically updates the…
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.248.14.1.1.30
hmSystemTimeSource
Shows the source of the system time.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.31
hmSysSTPErrorNumber
Advertised the reason why (R)STP could not be switched on. Error reasons are coded as OR operation bit by bit, see values: 0x00 - no errors - (R)STP is switched on, 0x01 - (R)S…
scalarInteger32.1.3.6.1.4.1.248.14.1.1.33
hmSysSoftwareCapability
This variable shows the capability of the running software. The string is formated as follow: Byte 1 : Always L (for Layer) Byte 2 : 2 or 3 (dependend if the software supports on…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.248.14.1.1.34
hmLEDGroupnode-.1.3.6.1.4.1.248.14.1.1.35
hmDIPSwitchGroupnode-.1.3.6.1.4.1.248.14.1.1.36
hmSysMaxTrunks
Maximum number of trunks for this chassis.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.1.1.37
hmLimiterGroupnode-.1.3.6.1.4.1.248.14.1.1.38
hmSysUSBGroupnode-.1.3.6.1.4.1.248.14.1.1.39
hmSysGroupMap
This string represents the current configuration of the chassis, encoded as an octet string. Each module is represented by a single octet. If the value of a single octet is the as…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.248.14.1.1.4
hmSysSwitchGroupnode-.1.3.6.1.4.1.248.14.1.1.40
hmSysSelftestGroupnode-.1.3.6.1.4.1.248.14.1.1.41
hmSysOEMGroupnode-.1.3.6.1.4.1.248.14.1.1.42
hmSysMaxSignalContacts
Maximum number of signal contacts for this chassis. Within each managed chassis/switch, the groups are uniquely numbered in the range from 1 to hmSysMaxSignalContacts.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.1.1.43
hmSysHttpsEnable
Enables/Disables HTTPS access to the device. A (1) enables, a (2) disables.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.44
hmSysHttpsPortNumber
The port number of the HTTPS web server.
scalarInteger32.1.3.6.1.4.1.248.14.1.1.45
hmSysSkipAcaOnBoot
Enable/disable loading from ACA on startup.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.46
hmSysConsoleServiceShellAdminState
Admin State of service shell. (1=enable, 2=disable).
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.47
hmSysHttpsCertFingerPrintType
Controls HTTPS certificate fingerprint generation. If set to 'sha1' hmSysHttpsCertFingerPrint will show the SHA1 fingerprint of the certificate.
scalarEnumeration.1.3.6.1.4.1.248.14.1.1.48
hmSysHttpsCertFingerPrint
The HTTPS certificate fingerprint as hash. The type of the hash is defined with hmSysHttpsCertFingerPrintType.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.248.14.1.1.49
hmSysMaxPowerSupply
Maximum number of power supplies for this chassis. Within each managed chassis/switch, the groups are uniquely numbered in the range from 1 to hmSysMaxPowerSupply.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.1.1.5
hmSysMaxFan
Maximum number of fans for this chassis. Within each managed chassis/switch, the fans are uniquely numbered in the range from 0 to hmSysMaxFan.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.1.1.6
hmSysGroupModuleCapacity
Maximum number of modules that an individual group can contain in this system.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.1.1.7
hmSysModulePortCapacity
Maximum number of ports that an individual module can contain in this system.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.1.1.8
hmSysGroupTable
This table contains variables for a closer description of a group.
table-.1.3.6.1.4.1.248.14.1.1.9