hmSysGroupModuleMap – HMPRIV-MGMT-SNMP-MIB

Object

column SNMPv2-TCDisplayString

This string represents the current configuration of a group,
encoded as an octet string. Each module is represented by a
single octet. If the value of a single octet is the ascii representation
of the character '1', it indicates that the module represented
by that octet is present, if '0', the module is absent. If the character is
'C', then the card is configurable but absent. The ports can be configured
and by setting hmSysModStatus to remove(3) the card can be logically
removed. The number of bytes in the string is given by
hmSysGroupModuleCapacity.

Context

MIB: HMPRIV-MGMT-SNMP-MIB
OID: .1.3.6.1.4.1.248.14.1.1.9.1.6
Type: column
Access: readonly
Status: current
Parent: hmSysGroupEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HMPRIV-MGMT-SNMP-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HMPRIV-MGMT-SNMP-MIB::hmSysGroupModuleMap'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'HMPRIV-MGMT-SNMP-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HMPRIV-MGMT-SNMP-MIB::hmSysGroupModuleMap.<index>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'HMPRIV-MGMT-SNMP-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HMPRIV-MGMT-SNMP-MIB::hmSysGroupModuleMap'

Syntax

SNMPv2-TCDisplayString

Source: SNMPv2-TCDisplayString
Base type: OctetString
Display format: 255a

Type Description

Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Enumerated Values

`1`	all
`2`	bc
`3`	bc-mc
`4`	bc-mc-uuc

Type Constraints

range: 0..255