hmSysBootVersion
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.1.1.19
Object
scalar
SNMPv2-TCDisplayString
This value is a string that contains the version of the Bootcode
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.1.1.19- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hmSystemTable
- Siblings
- 43
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmSysProduct Manufacturer-defined product identifier. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.1 |
| hmSysModuleTable This table contains variables for a closer description of a
module. | table | - | .1.3.6.1.4.1.248.14.1.1.10 |
| hmInterfaceExtTable This table contains variables for each interface of
the switch. | table | - | .1.3.6.1.4.1.248.14.1.1.100 |
| hmInterfaceTable This table contains variables for each interface of
the switch. | table | - | .1.3.6.1.4.1.248.14.1.1.11 |
| hmTrunkTable This table contains variables for each trunk of
the switch. | table | - | .1.3.6.1.4.1.248.14.1.1.12 |
| hmSFPTable This table contains variables for each SFP. | table | - | .1.3.6.1.4.1.248.14.1.1.13 |
| hmSysVersion This value is a string that contains at least the
following data :
SW: Version number of software
CH: Version number of chassis
BP: Version number of backplane | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.2 |
| hmSysChassisName This displaystring represents the name of the Chassis.
Any change of this variable will cause an automatically
update of this value on each Basic Board in this Chassis. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.20 |
| hmSysStpEnable This variable controls the STP operation of the entire
switch. To control the STP function of each port use
hmIfaceStpEnable | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.21 |
| hmSysFlowControl enables or disables flow control for the switch unit. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.22 |
| hmSysBOOTPEnable Enable/Disable BOOTP operation. A (1) enables, a (2) disables.
When disabled, no BOOTPs are transmitted by the system.
When enabled, the system sends BOOTP requests at booting. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.23 |
| hmSysDHCPEnable Enable/Disable DHCP operation. A (1) enables, a (2) disables.
When disabled, no DHCPs are transmitted by the system.
When enabled, the system sends DHCP requests at booting. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.24 |
| hmSysTelnetEnable Enable/Disable Telnet operation. A (1) enables, a (2) disables.
When disabled, no Telnet sessions are allowed by the system. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.25 |
| hmSysHTTPEnable Enable/Disable HTTP connection. A (1) enables, a (2) disables.
When disabled, no HTTP is allowed by the system. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.26 |
| hmSysPlugAndPlay Enable/Disable Plug&Play feature. A (1) enables, a (2) disables.
if this variable is set to enable(1), special Plug&Play actions are
performed at boot time and after a successful … | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.27 |
| hmBcastLimiterMode Global configuration of feature broadcast limiter.
If enabled, for each port the maximum rate of broadcasts
can be specified. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.29 |
| hmSysGroupCapacity The hmSysGroupCapacity is the number of groups that can
be contained within the chassis. Within each managed
chassis/switch, the groups are uniquely numbered in the
range from 1 t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.3 |
| hmSystemTime Time measured in seconds since 00:00:00 UTC, January 1, 1970.
The clock of the agents may be set using this variable.
Changing this variable on one agent automatically updates
the… | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.248.14.1.1.30 |
| hmSystemTimeSource Shows the source of the system time. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.31 |
| hmSysStpBPDUGuardEnable This variable controls the BPDU Guard operation of the entire
switch (globally). To control the BPDU Guard function of each port use
hmIfaceStpBpduGuardEnable.
If BPDU guard func… | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.32 |
| hmSysSTPErrorNumber Advertised the reason why (R)STP could not be switched on.
Error reasons are coded as OR operation bit by bit, see values:
0x00 - no errors - (R)STP is switched on,
0x01 - (R)S… | scalar | Integer32 | .1.3.6.1.4.1.248.14.1.1.33 |
| hmSysSoftwareCapability This variable shows the capability of the running software.
The string is formated as follow:
Byte 1 : Always L (for Layer)
Byte 2 : 2 or 3 (dependend if the software supports on… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.34 |
| hmLEDGroup | node | - | .1.3.6.1.4.1.248.14.1.1.35 |
| hmDIPSwitchGroup | node | - | .1.3.6.1.4.1.248.14.1.1.36 |
| hmSysMaxTrunks Maximum number of trunks for this chassis. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.37 |
| hmLimiterGroup | node | - | .1.3.6.1.4.1.248.14.1.1.38 |
| hmSysUSBGroup | node | - | .1.3.6.1.4.1.248.14.1.1.39 |
| hmSysGroupMap This string represents the current configuration of the chassis,
encoded as an octet string. Each module is represented by a
single octet. If the value of a single octet is the as… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.4 |
| hmSysSwitchGroup | node | - | .1.3.6.1.4.1.248.14.1.1.40 |
| hmSysSelftestGroup | node | - | .1.3.6.1.4.1.248.14.1.1.41 |
| hmSysOEMGroup | node | - | .1.3.6.1.4.1.248.14.1.1.42 |
| hmSysMaxSignalContacts Maximum number of signal contacts for this chassis. Within
each managed chassis/switch, the groups are uniquely numbered
in the range from 1 to hmSysMaxSignalContacts. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.43 |
| hmSysHttpsEnable Enables/Disables HTTPS access to the device. A (1) enables, a (2) disables. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.44 |
| hmSysHttpsPortNumber The port number of the HTTPS web server. | scalar | Integer32 | .1.3.6.1.4.1.248.14.1.1.45 |
| hmSysSkipAcaOnBoot Enable/disable loading from ACA on startup. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.46 |
| hmSysConsoleServiceShellAdminState Admin State of service shell. (1=enable, 2=disable). | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.47 |
| hmSysHttpsCertFingerPrintType Controls HTTPS certificate fingerprint generation. If set to 'sha1' hmSysHttpsCertFingerPrint
will show the SHA1 fingerprint of the certificate. | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.1.48 |
| hmSysHttpsCertFingerPrint The HTTPS certificate fingerprint as hash. The type of the hash is defined with hmSysHttpsCertFingerPrintType. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.1.1.49 |
| hmSysMaxPowerSupply Maximum number of power supplies for this chassis. Within
each managed chassis/switch, the groups are uniquely numbered
in the range from 1 to hmSysMaxPowerSupply. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.5 |
| hmSysMaxFan Maximum number of fans for this chassis. Within each managed
chassis/switch, the fans are uniquely numbered in the range
from 0 to hmSysMaxFan. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.6 |
| hmSysGroupModuleCapacity Maximum number of modules that an individual group can
contain in this system. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.7 |
| hmSysModulePortCapacity Maximum number of ports that an individual module can
contain in this system. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.1.8 |
| hmSysGroupTable This table contains variables for a closer description of
a group. | table | - | .1.3.6.1.4.1.248.14.1.1.9 |