hmSigConTrapCause

HMPRIV-MGMT-SNMP-MIB · .1.3.6.1.4.1.248.14.2.12.1.1.3
MIB view Table view

Object

column Enumeration 
This object identifies the cause for a trap. 
The index of the entity which produces the trap
is specified by hmSigConTrapCauseIndex.

Context

MIB
HMPRIV-MGMT-SNMP-MIB
OID
.1.3.6.1.4.1.248.14.2.12.1.1.3
Type
column
Access
readonly
Status
current
Parent
hmSigConConfigEntry
Table
hmSigConConfigTable
Siblings
23

Syntax

Enumeration

Values & Constraints

Enumerated Values
1error
2ignore

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hmSigConID
This index is used to identify the associated signalling contact.
columnInteger32.1.3.6.1.4.1.248.14.2.12.1.1.1
hmSigConSenseRedNotGuaranteed
Sets the monitoring of the HIPER-Ring, MRP-Ring or Fast HIPER-Ring.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.10
hmSigConSensePS1State
Sets the monitoring of the power supply 1.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.11
hmSigConSensePS2State
Sets the monitoring of the power supply 2.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.12
hmSigConSenseTemperature
Sets the monitoring of the device temperature.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.13
hmSigConSenseModuleRemoval
Sets the monitoring of module removal (platform dependant).
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.14
hmSigConSenseACARemoval
Sets the monitoring of the auto configuration adapter removal.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.15
hmSigConSensePS3State
Sets the monitoring of the power supply 3 (platform dependant).
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.16
hmSigConSensePS4State
Sets the monitoring of the power supply 4 (platform dependant).
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.17
hmSigConSenseFan1State
Sets the monitoring of the cooling fan (platform dependant).
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.18
hmSigConSensePS5State
Sets the monitoring of the power supply 5 (platform dependant).
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.19
hmSigConTrapEnable
Determines wether a trap shall be sent or not, when the signal contact operating state changes.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.2
hmSigConSensePS6State
Sets the monitoring of the power supply 6 (platform dependant).
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.20
hmSigConSensePS7State
Sets the monitoring of the power supply 7 (platform dependant).
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.21
hmSigConSensePS8State
Sets the monitoring of the power supply 8 (platform dependant).
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.22
hmSigConSenseACANotInSync
Sets the monitoring whether the configuration on ACA is in sync with the configuration in NVRAM.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.23
hmSigConSenseSRedNotGuaranteed
Sets the monitoring of sub-rings if configured and activated on the device.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.24
hmSigConTrapCauseIndex
This attribute specifies the entity which produces the trap. 1 - n: index of powersupply table / interfaces table 0: other errors
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.2.12.1.1.4
hmSigConMode
This attribute specifies the behaviour of the relay contact. The factory settings for signal contact 1 is monitoring the correct operation of entries specified to be survied. When…
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.5
hmSigConManualActivate
When operating in manual mode, the signal contact state can be set by this attribute.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.6
hmSigConOperState
This attribute shows the current operating state of the signal contact.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.7
hmSigConSenseLinkFailure
Sets the monitoring of the network connection(s).
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.8
hmSigConSenseControlLine
Sets the monitoring of the ring/network coupling.
columnEnumeration.1.3.6.1.4.1.248.14.2.12.1.1.9