hmSigConSensePS8State
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.2.12.1.1.22
Object
column
r/w
Enumeration
Sets the monitoring of the power supply 8 (platform dependant).
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.2.12.1.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hmSigConConfigEntry
- Table
- hmSigConConfigTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | active |
2 | notInService |
3 | config |
4 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmSigConID This index is used to identify the associated
signalling contact. | column | Integer32 | .1.3.6.1.4.1.248.14.2.12.1.1.1 |
| hmSigConSenseRedNotGuaranteed Sets the monitoring of the HIPER-Ring, MRP-Ring or Fast HIPER-Ring. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.10 |
| hmSigConSensePS1State Sets the monitoring of the power supply 1. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.11 |
| hmSigConSensePS2State Sets the monitoring of the power supply 2. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.12 |
| hmSigConSenseTemperature Sets the monitoring of the device temperature. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.13 |
| hmSigConSenseModuleRemoval Sets the monitoring of module removal (platform dependant). | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.14 |
| hmSigConSenseACARemoval Sets the monitoring of the auto configuration adapter removal. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.15 |
| hmSigConSensePS3State Sets the monitoring of the power supply 3 (platform dependant). | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.16 |
| hmSigConSensePS4State Sets the monitoring of the power supply 4 (platform dependant). | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.17 |
| hmSigConSenseFan1State Sets the monitoring of the cooling fan (platform dependant). | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.18 |
| hmSigConSensePS5State Sets the monitoring of the power supply 5 (platform dependant). | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.19 |
| hmSigConTrapEnable Determines wether a trap shall be sent or not, when
the signal contact operating state changes. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.2 |
| hmSigConSensePS6State Sets the monitoring of the power supply 6 (platform dependant). | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.20 |
| hmSigConSensePS7State Sets the monitoring of the power supply 7 (platform dependant). | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.21 |
| hmSigConSenseACANotInSync Sets the monitoring whether the configuration on ACA is in
sync with the configuration in NVRAM. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.23 |
| hmSigConSenseSRedNotGuaranteed Sets the monitoring of sub-rings if configured and activated on the device. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.24 |
| hmSigConTrapCause This object identifies the cause for a trap.
The index of the entity which produces the trap
is specified by hmSigConTrapCauseIndex. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.3 |
| hmSigConTrapCauseIndex This attribute specifies the entity which produces the trap.
1 - n: index of powersupply table / interfaces table
0: other errors | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.2.12.1.1.4 |
| hmSigConMode This attribute specifies the behaviour of the relay contact.
The factory settings for signal contact 1 is monitoring the
correct operation of entries specified to be survied.
When… | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.5 |
| hmSigConManualActivate When operating in manual mode, the signal contact state can
be set by this attribute. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.6 |
| hmSigConOperState This attribute shows the current operating state of the
signal contact. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.7 |
| hmSigConSenseLinkFailure Sets the monitoring of the network connection(s). | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.8 |
| hmSigConSenseControlLine Sets the monitoring of the ring/network coupling. | column | Enumeration | .1.3.6.1.4.1.248.14.2.12.1.1.9 |