hmNetSNMPGroup
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.2.3.50
Object
node
No description available.
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.2.3.50- Type
- node
- Parent
- hmNetwork
- Siblings
- 21
- Children
- 10
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmNetLocalIPAddr IP address of the management agent board.
Changing this value will take effect after activating with hmNetAction. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.1 |
| hmNetVlanPriority Vlan Priority which is used in management replies. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.10 |
| hmNetIpDscpPriority IP DSCP value which is used in management replies. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.11 |
| hmNetACDGroup | node | - | .1.3.6.1.4.1.248.14.2.3.12 |
| hmNetMacACDGroup | node | - | .1.3.6.1.4.1.248.14.2.3.13 |
| hmNetLocalPhysAddr Physical base address (MAC-address) of the agent. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.248.14.2.3.2 |
| hmNetHiDiscoveryGroup | node | - | .1.3.6.1.4.1.248.14.2.3.20 |
| hmNetGatewayIPAddr IP address of the default gateway.
Changing this value will take effect after activating with hmNetAction. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.3 |
| hmNetSNTPGroup | node | - | .1.3.6.1.4.1.248.14.2.3.30 |
| hmNetNTPGroup | node | - | .1.3.6.1.4.1.248.14.2.3.31 |
| hmNetMask Subnet mask.
Changing this value will take effect after activating with hmNetAction. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.4 |
| hmNetPTPGroup | node | - | .1.3.6.1.4.1.248.14.2.3.40 |
| hmNetPTP2Group | node | - | .1.3.6.1.4.1.248.14.2.3.41 |
| hmNetPTP2TCGroup | node | - | .1.3.6.1.4.1.248.14.2.3.42 |
| hmNetPPPBaseIPAddr Base address of the IP address range used by the
point-to-point protocol. The IP addresses
hmNetPPPBaseAddress..hmNetPPPBaseAddress+4 are assigned
to the client machines attached … | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.5 |
| hmNetPPPNetMask Subnet mask used by the point-to-point protocol.
Changing this variable on one agent automatically updates
the value on the other agents in the same chassis. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.6 |
| hmNetGPSGroup | node | - | .1.3.6.1.4.1.248.14.2.3.60 |
| hmNetAction This object, when read, always returns a value of other(1).
Setting the object to activate(2) causes a reconfiguration
of the IP protocol stack with the current values of
hmNetLo… | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.7 |
| hmRestrictedMgtAccessGroup | node | - | .1.3.6.1.4.1.248.14.2.3.70 |
| hmNetVlanID Vlan ID of the IP protocol stack. If the value is 0,
Traffic from all Vlans is accepted. Every other value means
that only traffic of the appropriate Vlan is accepted and outgoing… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.2.3.8 |
| hmNetLocalPhysAddrRange The number of MAC addresses reserved for this device, starting from hmNetLocalPhysAddr. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.2.3.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmNetSNMPv1Status Enables/disables the SNMP Version 1 protocol. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.50.1 |
| hmNetSNMPSynchronizeV3V1Status Enables/disables the synchronization between the SNMPv3 password table (hmAgentUserConfigTable)
and the SNMPv1/v2 community table (hmAgentSnmpCommunityConfigTable). | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.50.11 |
| hmNetSNMPv2Status Enables/disables the SNMP Version 2 protocol. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.50.2 |
| hmNetSNMPv3Status Enables/disables the SNMP Version 3 protocol. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.50.3 |
| hmNetSNMPAccessStatus Enables/disables the SNMP protocol access
on this device.
If only read access is allowed set this object
to readOnly(3). | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.50.4 |
| hmNetSNMPSynchronizeV1V3Status Enables/disables the synchronization between
the SNMPv1 community and the SNMPv3 password.
If enabled the first read-write community in hmAuthCommTable
is used for the SNMPv3 admi… | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.50.5 |
| hmNetSNMPPortNumber The port number of the snmp server.
To activate the port number the device
has to be restarted. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.50.6 |
| hmNetSNMPRadiusAuthenticate Enables/disables authentication of SNMPv3
users via RADIUS server | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.50.7 |
| hmNetSNMPv3EncryptionReadWriteStatus Enables/disables the SNMPv3 admin Data Encryption. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.50.8 |
| hmNetSNMPv3EncryptionReadOnlyStatus Enables/disables the SNMPv3 user Data Encryption. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.50.9 |