hmNetNTPGroup

HMPRIV-MGMT-SNMP-MIB · .1.3.6.1.4.1.248.14.2.3.31
MIB view Table view

Object

node

No description available.

Context

MIB
HMPRIV-MGMT-SNMP-MIB
OID
.1.3.6.1.4.1.248.14.2.3.31
Type
node
Parent
hmNetwork
Siblings
21
Children
11

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hmNetLocalIPAddr
IP address of the management agent board. Changing this value will take effect after activating with hmNetAction.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.248.14.2.3.1
hmNetVlanPriority
Vlan Priority which is used in management replies.
scalarInteger32.1.3.6.1.4.1.248.14.2.3.10
hmNetIpDscpPriority
IP DSCP value which is used in management replies.
scalarInteger32.1.3.6.1.4.1.248.14.2.3.11
hmNetACDGroupnode-.1.3.6.1.4.1.248.14.2.3.12
hmNetMacACDGroupnode-.1.3.6.1.4.1.248.14.2.3.13
hmNetLocalPhysAddr
Physical base address (MAC-address) of the agent.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.248.14.2.3.2
hmNetHiDiscoveryGroupnode-.1.3.6.1.4.1.248.14.2.3.20
hmNetGatewayIPAddr
IP address of the default gateway. Changing this value will take effect after activating with hmNetAction.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.248.14.2.3.3
hmNetSNTPGroupnode-.1.3.6.1.4.1.248.14.2.3.30
hmNetMask
Subnet mask. Changing this value will take effect after activating with hmNetAction.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.248.14.2.3.4
hmNetPTPGroupnode-.1.3.6.1.4.1.248.14.2.3.40
hmNetPTP2Groupnode-.1.3.6.1.4.1.248.14.2.3.41
hmNetPTP2TCGroupnode-.1.3.6.1.4.1.248.14.2.3.42
hmNetPPPBaseIPAddr
Base address of the IP address range used by the point-to-point protocol. The IP addresses hmNetPPPBaseAddress..hmNetPPPBaseAddress+4 are assigned to the client machines attached …
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.248.14.2.3.5
hmNetSNMPGroupnode-.1.3.6.1.4.1.248.14.2.3.50
hmNetPPPNetMask
Subnet mask used by the point-to-point protocol. Changing this variable on one agent automatically updates the value on the other agents in the same chassis.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.248.14.2.3.6
hmNetGPSGroupnode-.1.3.6.1.4.1.248.14.2.3.60
hmNetAction
This object, when read, always returns a value of other(1). Setting the object to activate(2) causes a reconfiguration of the IP protocol stack with the current values of hmNetLo…
scalarEnumeration.1.3.6.1.4.1.248.14.2.3.7
hmRestrictedMgtAccessGroupnode-.1.3.6.1.4.1.248.14.2.3.70
hmNetVlanID
Vlan ID of the IP protocol stack. If the value is 0, Traffic from all Vlans is accepted. Every other value means that only traffic of the appropriate Vlan is accepted and outgoing…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.2.3.8
hmNetLocalPhysAddrRange
The number of MAC addresses reserved for this device, starting from hmNetLocalPhysAddr.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.2.3.9
Child Objects
ObjectTypeSyntaxOID
hmNetNTPOperation
Selects operation mode for NTP.
scalarEnumeration.1.3.6.1.4.1.248.14.2.3.31.1
hmNetNTPStatusText
Operational status of the NTP sub-system.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.248.14.2.3.31.10
hmNetNTPStatusCode
Operational status of the NTP sub-system. The value is a bit mask: 1 local system clock synchronized 2 generic error (see hmNetNTPStatusText) 100 server 1 not synchronized 200 …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.14.2.3.31.11
hmNetNTPServer1AddrType
Address type for server 1. Currently, only ipv4 is supported.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.14.2.3.31.2
hmNetNTPServer1Address
The address of the first external time server.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.14.2.3.31.3
hmNetNTPServer2AddrType
Address type for server 2. Currently, only ipv4 is supported.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.14.2.3.31.4
hmNetNTPServer2Address
The address of the second external time server.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.14.2.3.31.5
hmNetNTPSyncInterval
NTP synchronisation interval in seconds. NTP will round down the value to a power of 2. The protocol will use an interval between the rounded value and the next power of 2.
scalarInteger32.1.3.6.1.4.1.248.14.2.3.31.6
hmNetNTPAnycastAddrType
Address type for anycasts. Currently, only ipv4 is supported.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.14.2.3.31.7
hmNetNTPAnycastAddress
Destination address for NTP broadcasts. A broadcast, multicast or unicast address may be specified. Setting the address to 0.0.0.0 disables NTP broadcasts.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.14.2.3.31.8
hmNetNTPAnycastInterval
Interval of NTP broadcast messages in seconds. NTP will round down the value to a power of 2.
scalarInteger32.1.3.6.1.4.1.248.14.2.3.31.9