hm2TrafficMgmtIfIngressStormCtlBcastMode
HM2-TRAFFICMGMT-MIB ·
.1.3.6.1.4.1.248.11.31.1.1.1.5
Object
If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
Context
- MIB
- HM2-TRAFFICMGMT-MIB
- OID
.1.3.6.1.4.1.248.11.31.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hm2TrafficMgmtIfEntry
- Table
- hm2TrafficMgmtIfTable
- Siblings
- 9
Syntax
HM2-TC-MIBHmEnabledStatus
- Source
- HM2-TC-MIBHmEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2TrafficMgmtIfFlowControl Enables or disables flow control per port | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.31.1.1.1.1 |
| hm2TrafficMgmtIfIngressStormCtlUcastThreshold Configures the unicast storm recovery threshold for this port
as a percentage of port speed in 1% increments or as an absolute pps rate. | column | Unsigned32 | .1.3.6.1.4.1.248.11.31.1.1.1.10 |
| hm2TrafficMgmtIfEgressShapingRate Maximum bandwidth allowed for this interface as a
whole, typically used to shape the outbound
transmission rate. The value is either specified in terms
of percentage of overall… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.31.1.1.1.2 |
| hm2TrafficMgmtIfEgressShapingRateUnit The unit of the interface shaping value.
Can be either percentage of port speed
or kilobits per second (kbps). | column | Enumeration | .1.3.6.1.4.1.248.11.31.1.1.1.3 |
| hm2TrafficMgmtIfIngressStormCtlThresholdUnit Configures the units of the threshold value(s) to percentage of
port speed or absolute packets per second. | column | Enumeration | .1.3.6.1.4.1.248.11.31.1.1.1.4 |
| hm2TrafficMgmtIfIngressStormCtlBcastThreshold Configures the broadcast storm recovery threshold for this port
as a percentage of port speed in 1% increments or as an absolute pps rate.
This threshold is also valid for multica… | column | Unsigned32 | .1.3.6.1.4.1.248.11.31.1.1.1.6 |
| hm2TrafficMgmtIfIngressStormCtlMcastMode If enabled, multicast storm recovery will function on this port.
When you specify Enable for multicast Storm Recovery and the multicast
traffic on this Ethernet port exceeds the c… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.31.1.1.1.7 |
| hm2TrafficMgmtIfIngressStormCtlMcastThreshold Configures the multicast storm recovery threshold for this port
as a percentage of port speed in 1% increments or as an absolute pps rate. | column | Unsigned32 | .1.3.6.1.4.1.248.11.31.1.1.1.8 |
| hm2TrafficMgmtIfIngressStormCtlUcastMode If enabled, unknown unicast storm recovery will function on this port.
When you specify Enable for unicast Storm Recovery and the unknown
unicast traffic on this Ethernet port ex… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.31.1.1.1.9 |