HM2-TRAFFICMGMT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
10
hm2TrafficMgmtIfTable
table
.1.3.6.1.4.1.248.11.31.1.1
·
1 row entry
·
10 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2TrafficMgmtIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-TRAFFICMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-TRAFFICMGMT-MIB::hm2TrafficMgmtIfTable'
A list of management objects for traffic control per interface.
Traffic Mgmt table entry.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Enables or disables flow control per port
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.11.31.1.1.1.1 |
||||
|
Maximum bandwidth allowed for this interface as a
whole, typically used to shape the outbound transmission rate. The value is either specified in terms of percentage of overall link speed for the port in 1% incremen… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.11.31.1.1.1.2 |
||||
|
The unit of the interface shaping value.
Can be either percentage of port speed or kilobits per second (kbps). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.11.31.1.1.1.3 |
||||
|
Configures the units of the threshold value(s) to percentage of
port speed or absolute packets per second. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.11.31.1.1.1.4 |
||||
|
If enabled, broadcast storm recovery will function on this port.
When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.11.31.1.1.1.5 |
||||
|
Configures the broadcast storm recovery threshold for this port
as a percentage of port speed in 1% increments or as an absolute pps rate. This threshold is also valid for multicasts or unknown unicasts, when the device… |
Unsigned32r/w Constraints: range: 0-14880000 |
.1.3.6.1.4.1.248.11.31.1.1.1.6 |
||||
|
If enabled, multicast storm recovery will function on this port.
When you specify Enable for multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.11.31.1.1.1.7 |
||||
|
Configures the multicast storm recovery threshold for this port
as a percentage of port speed in 1% increments or as an absolute pps rate. |
Unsigned32r/w Constraints: range: 0-14880000 |
.1.3.6.1.4.1.248.11.31.1.1.1.8 |
||||
|
If enabled, unknown unicast storm recovery will function on this port.
When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on this Ethernet port exceeds the configured threshold, the swit… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.11.31.1.1.1.9 |
||||
|
Configures the unicast storm recovery threshold for this port
as a percentage of port speed in 1% increments or as an absolute pps rate. |
Unsigned32r/w Constraints: range: 0-14880000 |
.1.3.6.1.4.1.248.11.31.1.1.1.10 |
