hm2Ptp2PortCapability
HM2-TIMESYNC-MIB ·
.1.3.6.1.4.1.248.11.50.1.4.2.2.1.14
Object
column
Bits
This object shows the capability of the ptp port.
Context
- MIB
- HM2-TIMESYNC-MIB
- OID
.1.3.6.1.4.1.248.11.50.1.4.2.2.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hm2Ptp2PortEntry
- Table
- hm2Ptp2PortTable
- Siblings
- 15
Syntax
Bits
Values & Constraints
Enumerated Values
0 | reserved |
1 | one-step |
2 | e2e-delay |
3 | p2p-delay |
4 | ptp2Ieee8023 |
5 | ptp2UdpIpv4 |
6 | ptp2UdpIpv6 |
7 | asymmCorrection |
8 | halfDuplex |
9 | ptp2UdpE2EGlobal |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2Ptp2PortEnable Enable or disable the sending and receiving / processing of PTP synchronization messages. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.1 |
| hm2Ptp2VersionNumber PTP version in use on this port (always ptpVersion2). | column | Enumeration | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.10 |
| hm2Ptp2NetworkProtocol Current configured network transport protocol of this port. | column | Enumeration | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.11 |
| hm2Ptp2V1Compatibility If set to on all PTPv2 messages will be padded to the length of a PTPv1 frame. This is required by some hardware. | column | Enumeration | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.12 |
| hm2Ptp2DelayAsymmetry Asymmetry of the link connected to this port in nanoseconds.
The hm2Ptp2DelayAsymmetry is positive when the master-to-slave
propagation time is longer than the slave-to-master p… | column | Integer32 | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.13 |
| hm2Ptp2VlanID VLAN in which PTP packets are send. With a value of -1 all packets are send untagged | column | Integer32 | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.15 |
| hm2Ptp2VlanPriority VLAN priority of tagged ptp packets | column | Integer32 | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.16 |
| hm2Ptp2PortState State of the PTP2 port instance. | column | Enumeration | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.2 |
| hm2Ptp2LogDelayReqInterval Logarithm to the base of 2 of the minimum DelayRequest interval used to measure the e2e-delay. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.3 |
| hm2Ptp2PeerMeanPathDelay If hm2Ptp2DelayMechanism is set to p2p this value is an estimate of the current one-way propagation delay (p2p-delay). | column | PtpTimeInterval | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.4 |
| hm2Ptp2LogAnnounceInterval Logarithm to the base of 2 of the mean announce interval. | column | Enumeration | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.5 |
| hm2Ptp2AnnounceReceiptTimeout Announce receipt timeout in multiples of hm2Ptp2LogAnnounceInterval. | column | Integer32 | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.6 |
| hm2Ptp2LogSyncInterval Logarithm to the base of 2 of the mean synchronization interval. | column | Hm2Ptp2LogSyncIntervalTc | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.7 |
| hm2Ptp2DelayMechanism This value indicates the propagation delay measuring option used by this port. | column | Enumeration | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.8 |
| hm2Ptp2LogPdelayReqInterval Logarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay). | column | Hm2Ptp2LogPdelayReqIntervalTc | .1.3.6.1.4.1.248.11.50.1.4.2.2.1.9 |