HM2-TIMESYNC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
45

hm2SntpServerBroadcastVlanTable

table
.1.3.6.1.4.1.248.11.50.1.2.2.10 · 1 row entry · 2 columns
Open in standard view
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2SntpServerBroadcastVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-TIMESYNC-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-TIMESYNC-MIB::hm2SntpServerBroadcastVlanTable' 
This table contains all VLANs used for SNTP server 
broadcast or multicast messages.
hm2SntpServerBroadcastVlanEntry row .1.3.6.1.4.1.248.11.50.1.2.2.10.1
The SNTP broadcast server VLAN objects.
Indexes
Column Syntax OID
hm2SntpServerBroadcastVlan
VLAN used for SNTP server broadcast or multicast messages.
Integer32
Constraints:
range: 1-4042
 .1.3.6.1.4.1.248.11.50.1.2.2.10.1.1
hm2SntpServerBroadcastVlanRowStatus
Indicates the status of an entry in this table,
and is used to create/delete entries. Objects
within this table can by changed while the status
is 'active'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.248.11.50.1.2.2.10.1.2

hm2SntpClientServerAddrTable

table
.1.3.6.1.4.1.248.11.50.1.2.3.10 · 1 row entry · 7 columns
Open in standard view
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2SntpClientServerAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-TIMESYNC-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-TIMESYNC-MIB::hm2SntpClientServerAddrTable' 
This table contains objects to configure
SNTP client connections.
hm2SntpClientServerAddrEntry row .1.3.6.1.4.1.248.11.50.1.2.3.10.1
The SNTP client connection objects.
Indexes
Column Syntax OID
hm2SntpClientServerIndex
Index for server table.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.11.50.1.2.3.10.1.1
hm2SntpClientServerAddrType
Address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.50.1.2.3.10.1.2
hm2SntpClientServerAddr
The address of the external time server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.50.1.2.3.10.1.3
hm2SntpClientServerPort
The port number of the external time server.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.248.11.50.1.2.3.10.1.4
hm2SntpClientServerDescr
The description of the server configured.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.248.11.50.1.2.3.10.1.5
hm2SntpClientServerStatus
Status of the SNTP client - server connection.
HmSntpClientServerStatus
Type Values:
1other
2success
3requestTimedOut
4badDateEncoded
5versionNotSupported
6serverUnsychronized
7serverKissOfDeath
 .1.3.6.1.4.1.248.11.50.1.2.3.10.1.6
hm2SntpClientServerRowStatus
Indicates the status of an entry in this table,
and is used to create/delete entries. Objects
within this table can by changed while the status
is 'active'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.248.11.50.1.2.3.10.1.7

hm2NtpClientServerAddrTable

table
.1.3.6.1.4.1.248.11.50.1.3.3.4 · 1 row entry · 9 columns
Open in standard view
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2NtpClientServerAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-TIMESYNC-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-TIMESYNC-MIB::hm2NtpClientServerAddrTable' 
This table contains variables for each interface of
the switch.
hm2NtpClientServerAddrEntry row .1.3.6.1.4.1.248.11.50.1.3.3.4.1
This entry contains variables for each interface of
the switch.
Indexes
Column Syntax OID
hm2NtpClientServerIndex
Index for Server table.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.11.50.1.3.3.4.1.1
hm2NtpClientServerAddressType
Address type for external time server.
Currently, only IPv4, IPv6 and DNS are supported.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.50.1.3.3.4.1.2
hm2NtpClientServerAddress
The address of the external time server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.50.1.3.3.4.1.3
hm2NtpClientServerPort
The port number of the external time server. Zero is not allowed
as port number.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.248.11.50.1.3.3.4.1.4
hm2NtpClientServerInitialBurst
The initial burst is intended to speed up the initial synchronization.
Use with caution as it can cause a overload situation on the server.
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.50.1.3.3.4.1.5
hm2NtpClientServerBurst
The burst mode can be used to increase the precision
on links with high jitter e.g. GSM/UMTS links
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.50.1.3.3.4.1.6
hm2NtpClientServerPrefer
The prefer flag can be used to mark the peer as preferred.
Among a set of correctly operating peers, this one will be chosen
as synchronization source.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.248.11.50.1.3.3.4.1.7
hm2NtpClientServerStatus
Status of the NTP client server connection.
Enumeration
Enumerated Values:
1disabled
2protocolError
3notSynchronized
4notResponding
5synchronizing
6synchronized
7genericError
 .1.3.6.1.4.1.248.11.50.1.3.3.4.1.10
hm2NtpClientServerRowStatus
Indicates the status of an entry in this table,
and is used to create/delete entries. Objects
within this table can be changed while the status
is 'active'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.248.11.50.1.3.3.4.1.11

hm2NtpClientListenAddrTable

table
.1.3.6.1.4.1.248.11.50.1.3.3.5 · 1 row entry · 6 columns
Open in standard view
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2NtpClientListenAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-TIMESYNC-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-TIMESYNC-MIB::hm2NtpClientListenAddrTable' 
Client table.
hm2NtpClientListenAddrEntry row .1.3.6.1.4.1.248.11.50.1.3.3.5.1
Client entry.
Indexes
Column Syntax OID
hm2NtpClientListenAddrIndex
Index for server table.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.11.50.1.3.3.5.1.1
hm2NtpClientListenAddrAddressType
Address type for external time server.
Currently, only IPv4, IPv6 and DNS are supported.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.50.1.3.3.5.1.2
hm2NtpClientListenAddrAddress
The address of the external time server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.50.1.3.3.5.1.3
hm2NtpClientListenAddrPort
The port number of the external time server. Zero is not allowed
as port number.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.248.11.50.1.3.3.5.1.4
hm2NtpClientListenAddrStatus
Status of the NTP client server connection.
Enumeration
Enumerated Values:
1disabled
2protocolError
3notSynchronized
4notResponding
5synchronizing
6synchronized
7genericError
 .1.3.6.1.4.1.248.11.50.1.3.3.5.1.10
hm2NtpClientListenAddrRowStatus
Indicates the status of an entry in this table,
and is used to create/delete entries. Objects
within this table can by changed while the status
is 'active'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.248.11.50.1.3.3.5.1.11

hm2Ptp2PortTable

table
.1.3.6.1.4.1.248.11.50.1.4.2.2 · 1 row entry · 16 columns
Open in standard view
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2Ptp2PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-TIMESYNC-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-TIMESYNC-MIB::hm2Ptp2PortTable' 
This table contains variables for each PTP2 port of
the switch.
hm2Ptp2PortEntry row .1.3.6.1.4.1.248.11.50.1.4.2.2.1
Entry for one port.
Indexes
Column Syntax OID
hm2Ptp2PortEnable
Enable or disable the sending and receiving / processing of PTP synchronization messages.
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.1
hm2Ptp2PortState
State of the PTP2 port instance.
Enumeration
Enumerated Values:
1initializing
2faulty
3disabled
4listening
5pre-master
6master
7passive
8uncalibrated
9slave
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.2
hm2Ptp2LogDelayReqInterval
Logarithm to the base of 2 of the minimum DelayRequest interval used to measure the e2e-delay.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.3
hm2Ptp2PeerMeanPathDelay
If hm2Ptp2DelayMechanism is set to p2p this value is an estimate of the current one-way propagation delay (p2p-delay).
PtpTimeInterval
Type Constraints:
range: 8
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.4
hm2Ptp2LogAnnounceInterval
Logarithm to the base of 2 of the mean announce interval.
Enumerationr/w
Enumerated Values:
0sec-1
1sec-2
2sec-4
3sec-8
4sec-16
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.5
hm2Ptp2AnnounceReceiptTimeout
Announce receipt timeout in multiples of hm2Ptp2LogAnnounceInterval.
Integer32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.6
hm2Ptp2LogSyncInterval
Logarithm to the base of 2 of the mean synchronization interval.
Hm2Ptp2LogSyncIntervalTcr/w
Type Values:
-3msec-125
-2msec-250
-1msec-500
0sec-1
1sec-2
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.7
hm2Ptp2DelayMechanism
This value indicates the propagation delay measuring option used by this port.
Enumerationr/w
Enumerated Values:
1e2e
2p2p
254disabled
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.8
hm2Ptp2LogPdelayReqInterval
Logarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay).
Hm2Ptp2LogPdelayReqIntervalTcr/w
Type Values:
0sec-1
1sec-2
2sec-4
3sec-8
4sec-16
5sec-32
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.9
hm2Ptp2VersionNumber
PTP version in use on this port (always ptpVersion2).
Enumerationr/w
Enumerated Values:
1ptpVersion1
2ptpVersion2
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.10
hm2Ptp2NetworkProtocol
Current configured network transport protocol of this port.
Enumerationr/w
Enumerated Values:
1udpIpv4
3ieee8023
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.11
hm2Ptp2V1Compatibility
If set to on all PTPv2 messages will be padded to the length of a PTPv1 frame. This is required by some hardware.
Enumerationr/w
Enumerated Values:
1on
2off
3auto
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.12
hm2Ptp2DelayAsymmetry
Asymmetry of the link connected to this port in nanoseconds.
The hm2Ptp2DelayAsymmetry is positive when the master-to-slave
propagation time is longer than the slave-to-master propagation time.
Integer32r/w
Constraints:
range: -2000000000-2000000000
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.13
hm2Ptp2PortCapability
This object shows the capability of the ptp port.
Bits
Enumerated Values:
0reserved
1one-step
2e2e-delay
3p2p-delay
4ptp2Ieee8023
5ptp2UdpIpv4
6ptp2UdpIpv6
7asymmCorrection
8halfDuplex
9ptp2UdpE2EGlobal
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.14
hm2Ptp2VlanID
VLAN in which PTP packets are send. With a value of -1 all packets are send untagged
Integer32r/w
Constraints:
range: -1-4042
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.15
hm2Ptp2VlanPriority
VLAN priority of tagged ptp packets
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.16

hm2Ptp2TCPortTable

table
.1.3.6.1.4.1.248.11.50.1.4.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2Ptp2TCPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-TIMESYNC-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-TIMESYNC-MIB::hm2Ptp2TCPortTable' 
This table contains variables for each PTP2 TC port of
the switch.
hm2Ptp2TCPortEntry row .1.3.6.1.4.1.248.11.50.1.4.3.2.1
Entry for one port.
Indexes
Column Syntax OID
hm2Ptp2TCPortEnable
Enable or disable the sending and receiving / processing of PTP synchronization messages.
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.50.1.4.3.2.1.1
hm2Ptp2TCLogPdelayReqInterval
Logarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay).
Hm2Ptp2LogPdelayReqIntervalTcr/w
Type Values:
0sec-1
1sec-2
2sec-4
3sec-8
4sec-16
5sec-32
 .1.3.6.1.4.1.248.11.50.1.4.3.2.1.2
hm2Ptp2TCFaulty
True if port is in Faulty state.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.248.11.50.1.4.3.2.1.3
hm2Ptp2TCPeerMeanPathDelay
This value is an estimate of the current one way propagation delay of a p2p-transparent-clock.
PtpTimeInterval
Type Constraints:
range: 8
 .1.3.6.1.4.1.248.11.50.1.4.3.2.1.4
hm2Ptp2TCDelayAsymmetry
Asymmetry of the link connected to this port in nanoseconds.
The hm2Ptp2TCDelayAsymmetry is positive when the master-to-slave
propagation time is longer than the slave-to-master propagation time.
Integer32r/w
Constraints:
range: -2000000000-2000000000
 .1.3.6.1.4.1.248.11.50.1.4.3.2.1.5