hmAgentRouterOspfRFC1583CompatibilityMode
HIRSCHMANN-MMP4-ROUTING-MIB ·
.1.3.6.1.4.1.248.15.2.4.11
Object
scalar
r/w
Enumeration
From RFC2328:
Controls the preference rules used in Section 16.4 when
choosing among multiple AS-external-LSAs advertising the
same destination. When set to 'enabled', the preference
rules remain those specified by RFC 1583 ([Ref9]). When set
to 'disabled', the preference rules are those stated in
Section 16.4.1, which prevent routing loops when AS-
external-LSAs for the same destination have been originated
from different areas. Set to 'enabled' by default.
In order to minimize the chance of routing loops, all OSPF
routers in an OSPF routing domain should have
RFC1583Compatibility set identically. When there are routers
present that have not been updated with the functionality
specified in Section 16.4.1 of this memo, all routers should
have RFC1583Compatibility set to 'enabled'. Otherwise, all
routers should have RFC1583Compatibility set to 'disabled',
preventing all routing loops.
Context
- MIB
- HIRSCHMANN-MMP4-ROUTING-MIB
- OID
.1.3.6.1.4.1.248.15.2.4.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hmAgentRouterOspfConfigGroup
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmAgentOspfDefaultMetric Default metric of redistributed routes, when OSPF redistributes
from other protocols. | scalar | Integer32 | .1.3.6.1.4.1.248.15.2.4.1 |
| hmAgentOspfVirtIfTable Information about this router's virtual inter-
faces. Augments ospfVirtIfTable from the OSPF-MIB. | table | - | .1.3.6.1.4.1.248.15.2.4.10 |
| hmAgentOspfDefaultMetricConfigured Flag to determine whether OSPF default-metric is configured or not. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.248.15.2.4.2 |
| hmAgentOspfDefaultInfoOriginate Flag to determine, whether OSPF can advertise a default-route learned
from another protocol. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.248.15.2.4.3 |
| hmAgentOspfDefaultInfoOriginateAlways When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always.
Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the
router's forwarding table contains a def… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.248.15.2.4.4 |
| hmAgentOspfDefaultInfoOriginateMetric Metric of the default route,which OSPF advertises when learned from
other protocol. | scalar | Integer32 | .1.3.6.1.4.1.248.15.2.4.5 |
| hmAgentOspfDefaultInfoOriginateMetricConfigured Flag to determine whether OSPF default-info originate metric
is configured or not. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.248.15.2.4.6 |
| hmAgentOspfDefaultInfoOriginateMetricType Metric Type of the default route,which OSPF advertises when learned from
other protocol. It can be 1(external type 1) or 2(external type 2). | scalar | Enumeration | .1.3.6.1.4.1.248.15.2.4.7 |
| hmAgentOspfRouteRedistTable This table contains the MIB objects required to configure
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,… | table | - | .1.3.6.1.4.1.248.15.2.4.8 |
| hmAgentOspfIfTable The OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF. Augments
ospfIfTable from the OSPF-MIB. | table | - | .1.3.6.1.4.1.248.15.2.4.9 |