HIRSCHMANN-MMP4-ROUTING-MIB Table View

This table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information.

hmAgentSwitchArpEntry row .1.3.6.1.4.1.248.15.2.1.10.1

The entry of the hmAgentSwitchArpTable.

Indexes

hmAgentSwitchArpIpAddress

Column	Syntax	OID
hmAgentSwitchArpAge This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are not subject to aging.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.2.1.10.1.1
hmAgentSwitchArpIpAddress The IP Address assigned to each interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.1.10.1.2
hmAgentSwitchArpMacAddress The hardware MAX Address that each interface maps to.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.248.15.2.1.10.1.3
hmAgentSwitchArpInterface The Associated IfIndex which identified the ARP Entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.1.10.1.4
hmAgentSwitchArpType The type of ARP entry.	Enumeration Enumerated Values: 1 local 2 gateway 3 static 4 dynamic	.1.3.6.1.4.1.248.15.2.1.10.1.5
hmAgentSwitchArpStatus The status of this ARP entry. Setting this object destroy will remove the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.2.1.10.1.6

The hmAgentSwitchIpInterfaceTable.

hmAgentSwitchIpInterfaceEntry row .1.3.6.1.4.1.248.15.2.2.3.1

The entry of the hmAgentSwitchIpInterfaceTable.

Indexes

hmAgentSwitchIpInterfaceIfIndex

Column	Syntax	OID
hmAgentSwitchIpInterfaceIfIndex The IfIndex associated with this instance.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.2.3.1.1
hmAgentSwitchIpInterfaceIpAddress The IpAddress assigned to this interface. When setting this value, the value of hmAgentSwitchIpInterfaceNetMask must be set at the same time.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.2.3.1.2
hmAgentSwitchIpInterfaceNetMask The NetMask assigned to this interface. When setting this value, the value of hmAgentSwitchIpInterfaceIpAddress must be set at the same time.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.2.3.1.3
hmAgentSwitchIpInterfaceClearIp Sets the interface's primary IpAddress and NetMask back to 0.0.0.0. The primary ip address can be removed if and only if there are no configured secondary addresses.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.2.2.3.1.4
hmAgentSwitchIpInterfaceRoutingMode Enables or disables routing for this interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.2.2.3.1.5
hmAgentSwitchIpInterfaceProxyARPMode Enables or disables Proxy ARP for this interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.2.2.3.1.6
hmAgentSwitchIpInterfaceMtuValue Configures the MTU value for this interface. If the value returned is 0 this interface is not enabled for routing. It is not valid to set this value to 0 if routing is enabled.	Unsigned32r/w Constraints: range: 0-0 range: 68-9000	.1.3.6.1.4.1.248.15.2.2.3.1.7
hmAgentSwitchIpInterfaceSlotNum The Slot Number associated with this instance.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.2.3.1.8
hmAgentSwitchIpInterfacePortNum The Port Number associated with this instance.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.2.3.1.9
hmAgentSwitchIpInterfaceNetdirectedBCMode Enables or disables netdirected broadcasts for this interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.2.2.3.1.10

There is no global administrative flag for router discovery.  The global
routing flag (hmAgentSwitchIpRoutingMode) will be used for this purpose.  If routing
is disabled, router discovery is disabled as well.

hmAgentSwitchIpRouterDiscoveryEntry row .1.3.6.1.4.1.248.15.2.2.4.1

The entry of the hmAgentSwitchIpRouterDiscoveryTable.

Indexes

hmAgentSwitchIpRouterDiscoveryIfIndex

Column	Syntax	OID
hmAgentSwitchIpRouterDiscoveryIfIndex Interface Number to configure Router Discovery on.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.2.4.1.1
hmAgentSwitchIpRouterDiscoveryAdvertiseMode Enable or disable router discovery on the interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.2.2.4.1.2
hmAgentSwitchIpRouterDiscoveryMaxAdvertisementInterval Maximum time allowed between sending router advertisements from the interface.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.248.15.2.2.4.1.3
hmAgentSwitchIpRouterDiscoveryMinAdvertisementInterval Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to hmAgentSwitchIpRouterDiscoveryMaxAdvertisementInterval.	Integer32r/w Constraints: range: 3-1800	.1.3.6.1.4.1.248.15.2.2.4.1.4
hmAgentSwitchIpRouterDiscoveryAdvertisementLifetime Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to hmAgentSwitchIpRouterDiscoveryMaxAdvertisementInterval.	Integer32r/w Constraints: range: 4-9000	.1.3.6.1.4.1.248.15.2.2.4.1.5
hmAgentSwitchIpRouterDiscoveryPreferenceLevel Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.2.4.1.6
hmAgentSwitchIpRouterDiscoveryAdvertisementAddress Address used when sending router advertisements from the interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.2.4.1.7

The hmAgentSwitchIpVlanTable.

hmAgentSwitchIpVlanEntry row .1.3.6.1.4.1.248.15.2.2.5.1

A Static VLAN for which routing can be enabled/disabled.

Indexes

hmAgentSwitchIpVlanId

Column	Syntax	OID
hmAgentSwitchIpVlanId The Vlan's Id.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.2.5.1.1
hmAgentSwitchIpVlanIfIndex The IfIndex associated with this VLAN.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.2.5.1.2
hmAgentSwitchIpVlanRoutingStatus Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.2.2.5.1.3

Contains a list of secondary IP Addresses associated with an interface.

hmAgentSwitchSecondaryAddressEntry row .1.3.6.1.4.1.248.15.2.2.6.1

A secondary IP Address for a given interface. This IP Address must not
conflict with the IP Address configured in the hmAgentSwitchIpInterfaceTable.

Indexes

hmAgentSwitchIpInterfaceIfIndex hmAgentSwitchSecondaryIpAddress

Column	Syntax	OID
hmAgentSwitchSecondaryIpAddress The Secondary IP Address assigned to this interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.2.6.1.1
hmAgentSwitchSecondaryNetMask The Secondary Net Mask assigned to this interface. This value must be set during creation, and can not be changed.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.2.6.1.2
hmAgentSwitchSecondaryStatus Creates a new entry in the Secondary Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The hmAgentSwit…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.2.2.6.1.3

This table contains the MIB objects required to configure 
the preferences/ administrative distances for the various
routing protocols:

hmAgentSwitchIpRoutePreferenceEntry row .1.3.6.1.4.1.248.15.2.2.7.1

The entry of the hmAgentSwitchIpRoutePreferenceTable.

Indexes

hmAgentSwitchIpRoutePreferenceSource

Column	Syntax	OID
hmAgentSwitchIpRoutePreferenceSource Routing protocol for which this entry belongs	Enumeration Enumerated Values: 1 connected 2 static 3 ospf-intra 4 ospf-inter 5 ospf-ext-t1 6 ospf-ext-t2 7 rip	.1.3.6.1.4.1.248.15.2.2.7.1.1
hmAgentSwitchIpRoutePreferenceValue Adminstrative distance for this routing protocol.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.248.15.2.2.7.1.2

......

hmAgentSwitchIpRouteStaticEntry row .1.3.6.1.4.1.248.15.2.2.8.1

The entry of the hmAgentSwitchIpRouteStaticTable.

Indexes

hmAgentSwitchIpRouteStaticDestination hmAgentSwitchIpRouteStaticDestinationMask hmAgentSwitchIpRouteStaticNextHop

Column	Syntax	OID
hmAgentSwitchIpRouteStaticDestination .....	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.2.8.1.1
hmAgentSwitchIpRouteStaticDestinationMask .....	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.2.8.1.2
hmAgentSwitchIpRouteStaticNextHop .....	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.2.8.1.3
hmAgentSwitchIpRouteStaticPreference .....	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.248.15.2.2.8.1.4
hmAgentSwitchIpRouteStaticStatus .....	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.2.2.8.1.5
hmAgentSwitchIpRouteStaticTrackId The trackId of the object that should be tracked by this nexthop. If the object goes down, the nexthop is removed from the routing table, it is added again if the object goes up. A value of zero means no tracking	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.15.2.2.8.1.6

This table contains the MIB objects required to configure 
route-redistribution for RIP. Here, RIP is the Destination
protocol and the source protocols can be any of : BGP, OSPF,
Static, Connected.

hmAgentRipRouteRedistEntry row .1.3.6.1.4.1.248.15.2.3.8.1

The entry of the hmAgentRipRouteRedistTable.

Indexes

hmAgentRipRouteRedistSource

Column	Syntax	OID
hmAgentRipRouteRedistSource Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry.	Enumeration Enumerated Values: 1 connected 2 static 3 ospf 4 bgp	.1.3.6.1.4.1.248.15.2.3.8.1.1
hmAgentRipRouteRedistMode User enabels/disables route-redistribution for a particular source protocol.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.2.3.8.1.2
hmAgentRipRouteRedistMetric Metric used for redistributing a particular source protocol route into RIP.	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.248.15.2.3.8.1.3
hmAgentRipRouteRedistMetricConfigured Flag to determine whether RIP redistribute-metric is configured or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.15.2.3.8.1.4
hmAgentRipRouteRedistMatchInternal If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf.	Enumerationr/w Enumerated Values: 1 true 2 false 3 not-applicable	.1.3.6.1.4.1.248.15.2.3.8.1.5
hmAgentRipRouteRedistMatchExternal1 If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf.	Enumerationr/w Enumerated Values: 1 true 2 false 3 not-applicable	.1.3.6.1.4.1.248.15.2.3.8.1.6
hmAgentRipRouteRedistMatchExternal2 If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf.	Enumerationr/w Enumerated Values: 1 true 2 false 3 not-applicable	.1.3.6.1.4.1.248.15.2.3.8.1.7
hmAgentRipRouteRedistMatchNSSAExternal1 If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf.	Enumerationr/w Enumerated Values: 1 true 2 false 3 not-applicable	.1.3.6.1.4.1.248.15.2.3.8.1.8
hmAgentRipRouteRedistMatchNSSAExternal2 If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf.	Enumerationr/w Enumerated Values: 1 true 2 false 3 not-applicable	.1.3.6.1.4.1.248.15.2.3.8.1.9
hmAgentRipRouteRedistDistList Access-list number of the access-list, which filters routes received from a source-protocol.	Unsigned32r/w Constraints: range: 1-199	.1.3.6.1.4.1.248.15.2.3.8.1.10
hmAgentRipRouteRedistDistListConfigured Flag to determine whether Access-list is configured or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.15.2.3.8.1.11

A list of subnets which require separate
configuration in RIP.  Augments rip2IfConfTable
 in the RIPv2-MIB.

hmAgentRip2IfConfEntry row .1.3.6.1.4.1.248.15.2.3.9.1

A Single Routing Domain in a single Subnet.
Augments rip2IfConfEntry in RIPv2-MIB.

Indexes

No indexes recorded

Column	Syntax	OID
hmAgentRip2IfConfAuthKeyId The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the value is not used.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.248.15.2.3.9.1.1

The hmAgentRip2InterfaceTable.

hmAgentRip2InterfaceEntry row .1.3.6.1.4.1.248.15.2.3.10.1

The entry of the hmAgentRip2InterfaceTable.

Indexes

hmAgentRip2InterfaceIfIndex

Column	Syntax	OID
hmAgentRip2InterfaceIfIndex The IfIndex associated with this instance.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.3.10.1.1
hmAgentRip2InterfaceAuthType The type of Authentication used on this interface.	Enumerationr/w Enumerated Values: 1 noAuthentication 2 simplePassword 3 md5	.1.3.6.1.4.1.248.15.2.3.10.1.2
hmAgentRip2InterfaceAuthKey The value to be used as the Authentication Key whenever the corresponding instance of hmAgentRip2InterfaceAuthType has a value other than noAuthentication. A modification of the corresponding instance of hmAgentRip2Int…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.248.15.2.3.10.1.3
hmAgentRip2InterfaceAuthKeyId The identifier for the authentication key used on this interface. This field is only meaningful when the hmAgentRip2InterfaceAuthType is md5(3); otherwise, the value is not used.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.248.15.2.3.10.1.4
hmAgentRip2InterfaceSendVersion What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implie…	Enumerationr/w Enumerated Values: 1 doNotSend 2 ripVersion1 3 rip1Compatible 4 ripVersion2	.1.3.6.1.4.1.248.15.2.3.10.1.5
hmAgentRip2InterfaceReceiveVersion This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.	Enumerationr/w Enumerated Values: 1 rip1 2 rip2 3 rip1OrRip2 4 doNotReceive	.1.3.6.1.4.1.248.15.2.3.10.1.6
hmAgentRip2InterfaceAdminState Enables/disables RIP on the interface	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.2.3.10.1.7
hmAgentRip2RcvBadPackets ......	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.2.3.10.1.8
hmAgentRip2RcvBadRoutes ....	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.2.3.10.1.9
hmAgentRip2SentUpdates ....	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.2.3.10.1.10

This table contains the MIB objects required to configure 
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,
Static, Connected.

hmAgentOspfRouteRedistEntry row .1.3.6.1.4.1.248.15.2.4.8.1

The entry of the hmAgentOspfRouteRedistTable.

Indexes

hmAgentOspfRouteRedistSource

Column	Syntax	OID
hmAgentOspfRouteRedistSource Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry.	Enumeration Enumerated Values: 1 connected 2 static 3 rip 4 bgp	.1.3.6.1.4.1.248.15.2.4.8.1.1
hmAgentOspfRouteRedistMode User enabels/disables route-redistribution for a particular source protocol.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.2.4.8.1.2
hmAgentOspfRouteRedistMetric Metric used for redistributing a particular source protocol route into OSPF.	Integer32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.248.15.2.4.8.1.3
hmAgentOspfRouteRedistMetricConfigured Flag to determine whether OSPF redistribute-metric is configured or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.15.2.4.8.1.4
hmAgentOspfRouteRedistMetricType Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).	Enumerationr/w Enumerated Values: 1 externalType1 2 externalType2	.1.3.6.1.4.1.248.15.2.4.8.1.5
hmAgentOspfRouteRedistTag It specifies the tag field in routes redistributed by OSPF.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.248.15.2.4.8.1.6
hmAgentOspfRouteRedistSubnets If this value is false, then OSPF will not redistribute subnetted routes.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.15.2.4.8.1.7
hmAgentOspfRouteRedistDistList Access-list number of the access-list, which filters routes received from a source-protocol.	Unsigned32r/w Constraints: range: 1-199	.1.3.6.1.4.1.248.15.2.4.8.1.8
hmAgentOspfRouteRedistDistListConfigured Flag to determine whether Access-list is configured or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.15.2.4.8.1.9

The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.  Augments 
 ospfIfTable from the OSPF-MIB.

hmAgentOspfIfEntry row .1.3.6.1.4.1.248.15.2.4.9.1

The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. Augments
ospfIfEntry in OSPF-MIB.

Indexes

No indexes recorded

Column	Syntax	OID
hmAgentOspfIfAuthKeyId The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the value is not used.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.248.15.2.4.9.1.1
hmAgentOspfIfIpMtuIgnoreFlag Configures the IP MTU Ignore Flag value for this OSPF interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.2.4.9.1.2

Information about this router's virtual inter-
faces.  Augments ospfVirtIfTable from the OSPF-MIB.

hmAgentOspfVirtIfEntry row .1.3.6.1.4.1.248.15.2.4.10.1

Information about a single Virtual Interface.
Augments ospfVirtIfEntry in OSPF-MIB.

Indexes

No indexes recorded

Column	Syntax	OID
hmAgentOspfVirtIfAuthKeyId The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwise, the value is not used.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.248.15.2.4.10.1.1

This table contains variables to define
an entry in the VRRP Tracking database.

hmVrrpTrackingEntry row .1.3.6.1.4.1.248.15.2.9.1.1

The entry of the hmVrrpTrackingTable.

Indexes

hmVrrpTrackIfIndex hmVrrpTrackVrid hmVrrpTrackId

Column	Syntax	OID
hmVrrpTrackIfIndex DURABLE: { 1:all } The interface number of the virtual router	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.9.1.1.1
hmVrrpTrackVrid DURABLE: { 1:all } The virtual router id for this virtual router	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.248.15.2.9.1.1.2
hmVrrpTrackId DURABLE: { 1:all } The id of the object being tracked	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.9.1.1.3
hmVrrpTrackDecrement DURABLE: { 1:all } The value by wich the current priority of the virtual router is decremented when the tracked object goes DOWN.	Integer32r/w Constraints: range: 1-253	.1.3.6.1.4.1.248.15.2.9.1.1.4
hmVrrpTrackOperStatus Shows if the tracked object is currently UP od DOWN	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.248.15.2.9.1.1.5
hmVrrpTrackRowStatus DURABLE: { 1:all } Defines the status of a vrrp tracking database entry. Set to createAndGo(4) to create a new row. Set to destroy(6) to delete an entry. Reads as active(1) if the tracked object exists and is trackable,…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.2.9.1.1.6

This table contains variables to define
an entry in the VRRP enhancements database.

hmVrrpExtEntry row .1.3.6.1.4.1.248.15.2.9.2.1

The entry of the hmVrrpExtTable.

Indexes

hmVrrpExtIfIndex hmVrrpExtVrid

Column	Syntax	OID
hmVrrpExtIfIndex DURABLE: { 1:all } The interface number of the virtual router	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.9.2.1.1
hmVrrpExtVrid DURABLE: { 1:all } The virtual router id for this virtual router	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.248.15.2.9.2.1.2
hmVrrpExtDomainId DURABLE: { 1:all } The domain this virtual router is a member of. If set to 0, the virtual router is not a member of any domain.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.248.15.2.9.2.1.3
hmVrrpExtDomainRole DURABLE: { 1:all } The role of this virtual router in its domain. This is none(1) if the virtual router is not member of a domain, supervisor(3) if it is the supervisor of its domain, member(2) otherwise.	Enumerationr/w Enumerated Values: 1 none 2 member 3 supervisor	.1.3.6.1.4.1.248.15.2.9.2.1.4
hmVrrpExtDomainStatus Shows if the domain configuration is correct for this virtual router	Enumeration Enumerated Values: 1 noError 2 noSupervisor 3 supervisorDown	.1.3.6.1.4.1.248.15.2.9.2.1.5
hmVrrpExtAdvertAddress DURABLE: { 1:all } The IP address advertisements of the virtual router are sent to	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.9.2.1.6
hmVrrpExtAdvertTimer DURABLE: { 1:all } This is used to set the interval between advertisements in milliseconds. This accesses the same value as vrrpOperAdvertisementInterval.	millisecondsInteger32r/w Constraints: range: 100-255000	.1.3.6.1.4.1.248.15.2.9.2.1.7
hmVrrpExtOperPriority DURABLE: { 1:all } The current operating priority of the virtual router. This can be different from the configured priority if tracked objects are down. For domain members this is the priority of the supervisor of that …	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.248.15.2.9.2.1.8
hmVrrpExtNotifyAddress DURABLE: { 1:all } The IP address notifications of the virtual router are sent to	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.15.2.9.2.1.9
hmVrrpExtNotifyLinkdown DURABLE: { 1:all } Enables or disables sending of notification messages if the virtual router's interface goes down.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.2.9.2.1.10
hmVrrpExtPreemptionDelay DURABLE: { 1:all } Time (in seconds) after startup of the virtual router by which the preemption of a Master with a lower priority is delayed.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.15.2.9.2.1.11

This table contains variables to define
an entry in the VRRP domain database.

hmVrrpDomainEntry row .1.3.6.1.4.1.248.15.2.9.3.1

Indexes

hmVrrpDomainId

Column	Syntax	OID
hmVrrpDomainId The domain ID.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.248.15.2.9.3.1.1
hmVrrpDomainMemberSendAdv DURABLE: { 1:all } Determines if the members of this domain send advertisement packets. If set to disabled(2), only the supervisor of the domain sends packets.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.15.2.9.3.1.2
hmVrrpDomainStatus Shows if the configuration of the domain is complete.	Enumeration Enumerated Values: 1 noError 2 noSupervisor 3 supervisorDown	.1.3.6.1.4.1.248.15.2.9.3.1.3
hmVrrpDomainSupervisorIfIndex The interface number of the supervisor of the domain	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.2.9.3.1.4
hmVrrpDomainSupervisorVrid The virtual router id of the supervisor of the domain	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.248.15.2.9.3.1.5
hmVrrpDomainOperPriority The current operating priority of the domain. This can be different from the configured priority if tracked objects are down. For domain members this is the priority of the supervisor of that Domain if the supervisor is…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.248.15.2.9.3.1.6
hmVrrpDomainSupervisorOperState Shows the current operational state of the domain supervisor.	Enumeration Enumerated Values: 1 initialize 2 backup 3 master 4 unknown	.1.3.6.1.4.1.248.15.2.9.3.1.7