hh3cMplsLdpLsrLabelRetentionMode
HH3C-MPLS-LDP-MIB ·
.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.8
Object
column
r/w
Enumeration
The LSR can be configured to use either conservative or liberal
label retention mode.
If the value of this object is conservative(1) then advertized
label mappings are retained only if they will be used to forward
packets, i.e. if label came from a valid next hop. If the value of
this object is liberal(2) then all advertized label mappings are
retained whether they are from a valid next hop or not.
Current release of MPLS does not provide support to assign
this MIB object with a value 'liberal'.
Context
- MIB
- HH3C-MPLS-LDP-MIB
- OID
.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hh3cMplsLdpLsrIncarnEntry
- Table
- hh3cMplsLdpLsrIncarnTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cMplsLdpLsrID The LSR's Identifier. | column | MplsLsrIdentifier | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.1 |
| hh3cMplsLdpLsrMaxLdpEntities The maximum number of LDP entities that can be supported by this
Incarnation. | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.10 |
| hh3cMplsLdpLsrMaxLocalPeers The maximum number of Local LDP peers that can be supported by
this Incarnation. | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.11 |
| hh3cMplsLdpLsrMaxRemotePeers The maximum number of Remote LDP peers that can be supported by
this Incarnation. | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.12 |
| hh3cMplsLdpLsrMaxIfaces The maximum number of Label enabled Interfaces that can be
supported by this Incarnation. | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.13 |
| hh3cMplsLdpLsrMaxLsps The maximum number of Label Switched Paths that can be
supported by this Incarnation. | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.14 |
| hh3cMplsLdpLsrMaxCrlspTnls The maximum number of CRLSPs that can be supported by this
Incarnation. | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.15 |
| hh3cMplsLdpLsrMaxErhopPerCrlspTnl The maximum number of ER-Hops that can be supported in a
CRLSP tunnel. | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.16 |
| hh3cMplsLdpLsrRowStatus An object that allows entries in this table to
be created and deleted using the
RowStatus convention. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.17 |
| hh3cMplsLdpLsrMaxVcmCapability | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.18 |
| hh3cMplsLdpLsrVcmPathVecInAllLblMapPresent | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.19 |
| hh3cMplsLdpLsrLoopDetectionPresent A indication of whether this LSR supports loop detection. A
value of 'true' indicates this LSR does support loop detection.
A value of 'false' indicates this LSR does not support… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.2 |
| hh3cMplsLdpLsrRequestRetrytimerValue | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.20 |
| hh3cMplsLdpLsrNumOfRequestRetryAttempts | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.21 |
| hh3cMplsLdpLsrLoopDetectionAdminStatus To enable loop detection the value of this object should be
'enabled(1)'. Otherwise, to turn off loop detection, set this
value to 'disabled(2)'. | column | Enumeration | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.3 |
| hh3cMplsLdpLsrPathVectorLimit This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent
has the value of 'true'.
The value of this object represents the limit of path vectors which
this… | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.4 |
| hh3cMplsLdpLsrHopCountLimit This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent
has the value of 'true'.
The value of this object represents the limit on the Hop Count
which thi… | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.5 |
| hh3cMplsLdpLsrLoopPreventionPresent A indication of whether this LSR supports loop prevention. A
value of 'true' indicates this LSR does support loop prevention.
A value of 'false' indicates this LSR does not suppo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.6 |
| hh3cMplsLdpLsrLoopPreventionAdminStatus To enable loop prevention the value of this object should be
'enabled(1)'. Otherwise, to turn off loop prevention, set this
value to 'disabled(2)'.
Current release… | column | Enumeration | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.7 |
| hh3cMplsLdpLsrIncarnID The incarnation acts as index to all the elements in this
table. | column | Integer32 | .1.3.6.1.4.1.25506.8.12.2.1.1.1.1.9 |