HH3C-MPLS-LDP-MIB Table View

MPLS provides support for multiple incarnations of the
MPLS Stack in a target. The LSR defined in the standard <IETF
DRAFT> MIB is treated as an incarnation in this MIB. Using a
local policy the Network administrator must group the LDP Entities
that should be placed in an incarnation.

hh3cMplsLdpLsrIncarnEntry row .1.3.6.1.4.1.25506.8.12.2.1.1.1.1

An entry in this table represents an LSR incarnation.
All the entries in this table are created initially when the
LDP is initiated. The row status of each entry will be in
'notInService' state initially. The row status…

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpLsrID The LSR's Identifier.	MplsLsrIdentifierr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.1
hh3cMplsLdpLsrLoopDetectionPresent A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.2
hh3cMplsLdpLsrLoopDetectionAdminStatus To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'.	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.3
hh3cMplsLdpLsrPathVectorLimit This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.4
hh3cMplsLdpLsrHopCountLimit This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.5
hh3cMplsLdpLsrLoopPreventionPresent A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. Curre…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.6
hh3cMplsLdpLsrLoopPreventionAdminStatus To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of MPLS does not provide support to ass…	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.7
hh3cMplsLdpLsrLabelRetentionMode The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used t…	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.8
hh3cMplsLdpLsrIncarnID The incarnation acts as index to all the elements in this table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.9
hh3cMplsLdpLsrMaxLdpEntities The maximum number of LDP entities that can be supported by this Incarnation.	Integer32r/w	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.10
hh3cMplsLdpLsrMaxLocalPeers The maximum number of Local LDP peers that can be supported by this Incarnation.	Integer32r/w	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.11
hh3cMplsLdpLsrMaxRemotePeers The maximum number of Remote LDP peers that can be supported by this Incarnation.	Integer32r/w	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.12
hh3cMplsLdpLsrMaxIfaces The maximum number of Label enabled Interfaces that can be supported by this Incarnation.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.13
hh3cMplsLdpLsrMaxLsps The maximum number of Label Switched Paths that can be supported by this Incarnation.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.14
hh3cMplsLdpLsrMaxCrlspTnls The maximum number of CRLSPs that can be supported by this Incarnation.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.15
hh3cMplsLdpLsrMaxErhopPerCrlspTnl The maximum number of ER-Hops that can be supported in a CRLSP tunnel.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.16
hh3cMplsLdpLsrRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.17
hh3cMplsLdpLsrMaxVcmCapability	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.18
hh3cMplsLdpLsrVcmPathVecInAllLblMapPresent	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.19
hh3cMplsLdpLsrRequestRetrytimerValue	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.20
hh3cMplsLdpLsrNumOfRequestRetryAttempts	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.1.1.1.21

This table contains information about the
MPLS Label Distribution Protocol Entities which
exist on this Label Switch Router (LSR).

hh3cMplsLdpEntityEntry row .1.3.6.1.4.1.25506.8.12.2.1.2.1.1

An entry in this table represents an LDP entity.
An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.

An LPD Entity is uniquely indexed by its LPD
Identifier.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpEntityID The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address as…	MplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.1
hh3cMplsLdpEntityLabelSpaceType The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type…	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.2
hh3cMplsLdpEntityDefVpi The Default VPI value used in the label for the default VPI.	AtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.3
hh3cMplsLdpEntityDefVci The Default VCI value used in the label for the default VCI.	AtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.4
hh3cMplsLdpEntityUnlabTrafVpi VPI value of the VCC supporting unlabeled traffic.	AtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.5
hh3cMplsLdpEntityUnlabTrafVci VCI value of the VCC supporting unlabeled traffic.	AtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.6
hh3cMplsLdpEntityMergeCapability Sets the merge capability for this LDP entity. Current Release of MPLS does not provide support for any kind of Merge.	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.7
hh3cMplsLdpEntityVcDirectionality Sets the VC directionality for this LDP entity.	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.8
hh3cMplsLdpEntityWellKnownDiscoveryPort The well known LDP Discovery Port.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.9
hh3cMplsLdpEntityMtu The maximum transmission unit (MTU) that was configured for this entity.	Integer32r/w	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.10
hh3cMplsLdpEntityKeepAliveHoldTimer The two octet value which is the proposed keep alive hold timer for this LDP Entity.	secondsInteger32r/w	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.11
hh3cMplsLdpEntityFailedInitSessionThreshold When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.12
hh3cMplsLdpEntityLabelDistributionMethod For any given LDP session, the method of label distribution must be specified. Current release of MPLS does not provide support for 'downstreamUnsolicited'.	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.13
hh3cMplsLdpEntityLabelAllocationMethod For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode.	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.14
hh3cMplsLdpEntityHelloHoldTimer The two octet value which is the proposed hello hold timer for this LDP Entity.	secondsInteger32r/w	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.15
hh3cMplsLdpEntityRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.8.12.2.1.2.1.1.16

This table contains information about the
interfaces that are associated with an LDP Entity.
There should be atleast one interface associated with
each LDP Entity. If the LDP Entity supports 'per interface
based label space' label type then, atmost one interface can be
associated with the LDP entity. If the LDP Entity supports
'per platform based label space' label type then, more than one
interface can be associated with the LDP Entity.

hh3cMplsLdpEntityIfEntry row .1.3.6.1.4.1.25506.8.12.2.1.2.2.1

An entry in this table represents an Interface that is
associated with a LDP entity.

An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.

An interface (r…

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpEntityIfIndex Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II	Unsigned32	.1.3.6.1.4.1.25506.8.12.2.1.2.2.1.1
hh3cMplsLdpEntityIfIpv4Address The IPv4 address associated with the interface.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.8.12.2.1.2.2.1.2
hh3cMplsLdpEntityIfRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.8.12.2.1.2.2.1.3

The MPLS LDP Entity Configurable ATM Label Range Table.
The purpose of this table is to provide a mechanism
for specifying a contiguous range of vpi's
with a contiguous range of vci's, or a 'label range'
for LDP Entities.
          
LDP Entities which use ATM must have at least one
entry in this table.

hh3cMplsLdpEntityConfAtmLabelRangeEntry row .1.3.6.1.4.1.25506.8.12.2.1.2.3.1

A row in the LDP Entity Configurable ATM Label
Range Table. One entry in this table contains
information on a single range of labels
represented by the configured Upper and Lower
Bounds VPI/VCI pairs.
NOTE: The ranges…

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVPI The minimum VPI number configured for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.25506.8.12.2.1.2.3.1.1
hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVCI The minimum VCI number configured for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.25506.8.12.2.1.2.3.1.2
hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVPI The maximum VPI number configured for this range.	AtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.25506.8.12.2.1.2.3.1.3
hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVCI The maximum VCI number configured for this range.	AtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.25506.8.12.2.1.2.3.1.4
hh3cMplsLdpEntityConfAtmLabelRangeRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.8.12.2.1.2.3.1.5

This table is a read-only table which augments
the MplsLdpConfEntityTable.  The purpose of this
table is to keep statistical information about
the LDP Entities on the LSR.

hh3cMplsLdpEntityStatsEntry row .1.3.6.1.4.1.25506.8.12.2.1.2.4.1

A row in this table contains statistical information
about an LDP Entity.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpAttemptedSessions A count of the total attempted sessions for this LDP Entity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.8.12.2.1.2.4.1.1

Information about LDP peers which have been discovered
by the LDP Entities that are managed by this agent.

hh3cMplsLdpPeerEntry row .1.3.6.1.4.1.25506.8.12.2.1.3.1.1

Information about a single Peer.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpPeerIndex An identifier for the LDP peer that is unique within the scope of this agent.	Unsigned32	.1.3.6.1.4.1.25506.8.12.2.1.3.1.1.1
hh3cMplsLdpPeerID The LDP identifier of this LDP Peer.	MplsLdpIdentifierr/w Type Constraints: range: 6	.1.3.6.1.4.1.25506.8.12.2.1.3.1.1.2
hh3cMplsLdpPeerInternetworkAddrType The type of the internetwork layer address of this LDP peer. This object indicates how the value of hh3cMplsLdpPeerInternetworkAddr is to be interpreted.	AddressFamilyNumbersr/w Type Values: 0 other 1 ipv4 2 ipv6 3 nsap 4 hdlc 5 bbn1822 6 ieee802 7 e163 8 e164 9 f69 10 x121 11 ipx 12 appleTalk 13 decnetIV 14 banyanVines 15 e164WithNsap	.1.3.6.1.4.1.25506.8.12.2.1.3.1.1.3
hh3cMplsLdpPeerInternetworkAddr The value of the internetwork layer address of this LDP peer.	MplsLdpGenAddrr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.25506.8.12.2.1.3.1.1.4
hh3cMplsLdpPeerDefaultMtu The default maximum transmission unit (MTU) of the LDP Peer.	Integer32r/w	.1.3.6.1.4.1.25506.8.12.2.1.3.1.1.5
hh3cMplsLdpPeerKeepAliveHoldTimer The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval.	secondsInteger32r/w	.1.3.6.1.4.1.25506.8.12.2.1.3.1.1.6
hh3cMplsLdpPeerLabelDistributionMethod For any given LDP session, the method of label distribution must be specified.	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.3.1.1.7
hh3cMplsLdpPeerType Indicates whether a peer is a local peer or a remote peer	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.3.1.1.8
hh3cMplsLdpPeerRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.8.12.2.1.3.1.1.9

The MPLS LDP Peer Configurable ATM Label Range Table.
The purpose of this table is to provide a mechanism
for specifying a contiguous range of vpi's with a contiguous
range of vci's, or a 'label range' for LDP Peers.
LDP Peers which use ATM must have at least one
entry in this table.

hh3cMplsLdpPeerConfAtmLabelRangeEntry row .1.3.6.1.4.1.25506.8.12.2.1.3.2.1

A row in the LDP Peer Configurable ATM Label Range Table.
One entry in this table contains information
on a single range of labels represented by
the configured Upper and Lower Bounds VPI/VCI pairs.

NOTE: …

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVPI The minimum VPI number configured for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.25506.8.12.2.1.3.2.1.1
hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVCI The minimum VCI number configured for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.25506.8.12.2.1.3.2.1.2
hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVPI The maximum VPI number configured for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.25506.8.12.2.1.3.2.1.3
hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVCI The maximum VCI number configured for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.25506.8.12.2.1.3.2.1.4

A table of Sessions between the LDP Entities and
LDP Peers.

hh3cMplsLdpSessionEntry row .1.3.6.1.4.1.25506.8.12.2.1.4.1.1

An entry in this table represents information on a
single session between an LDP Entity and LDP Peer.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpSessionIndex An unique identifier for this entry such that it identifies a specific LDP Session.	Unsigned32	.1.3.6.1.4.1.25506.8.12.2.1.4.1.1.1
hh3cMplsLdpSessionID The LDP Session identifier.	MplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.25506.8.12.2.1.4.1.1.2
hh3cMplsLdpSessionProtocolVersion The version of the LDP Protocol which this session is using.	Integer32	.1.3.6.1.4.1.25506.8.12.2.1.4.1.1.3
hh3cMplsLdpSessionKeepAliveHoldTimeRemaining The keep alive hold time remaining for this session.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.25506.8.12.2.1.4.1.1.4
hh3cMplsLdpSessionRole An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role.	Enumeration	.1.3.6.1.4.1.25506.8.12.2.1.4.1.1.5
hh3cMplsLdpSessionState The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior.	Enumeration	.1.3.6.1.4.1.25506.8.12.2.1.4.1.1.6
hh3cMplsLdpSessionAtmLabelRangeLowerBoundVPI The minimum VPI number for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.25506.8.12.2.1.4.1.1.7
hh3cMplsLdpSessionAtmLabelRangeLowerBoundVCI The minimum VCI number for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.25506.8.12.2.1.4.1.1.8
hh3cMplsLdpSessionAtmLabelRangeUpperBoundVPI The maximum VPI number for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.25506.8.12.2.1.4.1.1.9
hh3cMplsLdpSessionAtmLabelRangeUpperBoundVCI The maximum VCI number for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.25506.8.12.2.1.4.1.1.10

A table of Hello Adjacencies for Sessions.

hh3cMplsLdpHelloAdjacencyEntry row .1.3.6.1.4.1.25506.8.12.2.1.5.1.1

Each row represents a single LDP Hello Adjacency.
An LDP Session can have one or more Hello adjacencies.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpHelloAdjacencyIndex An identifier for the adjacency.	Unsigned32	.1.3.6.1.4.1.25506.8.12.2.1.5.1.1.1
hh3cMplsLdpHelloAdjacencyHoldTimeRemaining The time remaining for this Hello Adjacency.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.25506.8.12.2.1.5.1.1.2

The hh3cMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels
to be created. The ER hops associated with a CRLSP tunnel
are to be configured using the hh3cMplsLdpCrlspErHopTable.

hh3cMplsLdpCrlspTnlEntry row .1.3.6.1.4.1.25506.8.12.2.1.6.1.1

An entry in this table represents an CRLSP MPLS tunnel.
An entry can be created by a network administrator.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpCrlspTnlIndex Uniquely identifies this row.	MplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.1
hh3cMplsLdpCrlspTnlName The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port.	DisplayStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.2
hh3cMplsLdpCrlspTnlDirection Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional.	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.3
hh3cMplsLdpCrlspTnlSignallingProto The signaling protocol, if any, that set up this tunnel.	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.4
hh3cMplsLdpCrlspTnlSetupPrio The setup priority of this tunnel.	Integer32r/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.5
hh3cMplsLdpCrlspTnlHoldingPrio The holding priority for this tunnel.	Integer32r/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.6
hh3cMplsLdpCrlspTnlPeakDataRate The peak rate - the maximum rate at which traffic will be sent on the CRLSP.	bits per secondBitRater/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.7
hh3cMplsLdpCrlspTnlPeakBurstSize The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP.	bytesBurstSizer/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.8
hh3cMplsLdpCrlspTnlCommittedDataRate The committed rate - the committed rate at which traffic will be sent on the CRLSP.	bits per secondBitRater/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.9
hh3cMplsLdpCrlspTnlCommittedBurstSize The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP.	bytesBurstSizer/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.10
hh3cMplsLdpCrlspTnlExcessBurstSize The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP.	bytesBurstSizer/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.11
hh3cMplsLdpCrlspTnlIsPinned Indicates whether the loose-routed hops of this tunnel are to be pinned.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.12
hh3cMplsLdpCrlspTnlFrequency Indicates the frequency of usage of the established CRLSP.	Integer32r/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.13
hh3cMplsLdpCrlspTnlWeight Indicates the weight that is the established CRLSP.	Integer32r/w	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.14
hh3cMplsLdpCrlspTnlRowStatus For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hh3cMplsLdpErHopTable, associated with this tunnel.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.8.12.2.1.6.1.1.15

The hh3cMplsLdpCrlspErHopTable is used to indicate the hops,
strict  or  loose,  for an MPLS  CRLSP tunnel  defined  in
hh3cMplsLdpCrlspTnlTable.
          
There must be atleast one entry in this table for each CRLSP tunnel
that is supported in the hh3cMplsLdpCrlspTnlTable.
          
The first row in the table  is  the
first hop after the origination point of the tunnel.

hh3cMplsLdpCrlspErHopEntry row .1.3.6.1.4.1.25506.8.12.2.1.6.2.1

An entry in this table represents a tunnel hop. An
entry is created by a network administrator for
signalled ERLSP set up by LDP or RSVP.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cMplsLdpCrlspErHopIndex Secondary index into this table identifying the particular hop.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.12.2.1.6.2.1.1
hh3cMplsLdpCrlspErHopAddrType Address type of this hop.	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.6.2.1.2
hh3cMplsLdpCrlspErHopIpv4Addr If hh3cMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.8.12.2.1.6.2.1.3
hh3cMplsLdpCrlspErHopIpv4PrefixLen If hh3cMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0.	Integer32r/w	.1.3.6.1.4.1.25506.8.12.2.1.6.2.1.4
hh3cMplsLdpCrlspErHopStrictOrLoose Whether this is a strict or loose hop.	Enumerationr/w	.1.3.6.1.4.1.25506.8.12.2.1.6.2.1.5
hh3cMplsLdpCrlspErHopRowStatus For creating, modifying and deleting this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.8.12.2.1.6.2.1.6