hh3cDot11RRM11acMadtMaxNss
HH3C-DOT11-RRM-MIB ·
.1.3.6.1.4.1.25506.2.75.8.1.1.12
Object
scalar
r/w
Integer32
Specify the maximum NSS index for 802.11ac mandatory rates. The value 0 indicates that no maximum NSS index is specified. No maximum NSS index is specified for 802.11ac mandatory rates by default. The specified maximum NSS index for 802.11ac supported rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates.
Context
- MIB
- HH3C-DOT11-RRM-MIB
- OID
.1.3.6.1.4.1.25506.2.75.8.1.1.12- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hh3cDot11RRMGlobalCfgPara
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cDot11RRM11nMadtMaxMcs Specify the maximum modulation and coding scheme (MCS) index for
802.11n mandatory rates.
The value 255 indicates that no maximum MCS index
is specified. No maximum MCS index is … | scalar | Integer32 | .1.3.6.1.4.1.25506.2.75.8.1.1.1 |
| hh3cDot11StaInterfNumThreshhd Represents threshold of STA interference.
If the value of STA interference exceeds this threshold,
STA interference trap will be sent. If the value of this
node is zero, STA inte… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.75.8.1.1.10 |
| hh3cDot11RRM11nMultiCastMcs Specify the modulation and coding scheme (MCS) index for 802.11n
multicast rates.
The value 4294967295 indicates that no MCS index is specified.
No MCS index is specified for 802.… | scalar | Unsigned32 | .1.3.6.1.4.1.25506.2.75.8.1.1.11 |
| hh3cDot11RRM11acSuptMaxNss Specify the maximum NSS index for 802.11ac supported rates.
The specified maximum NSS index for 802.11ac supported rates must be no
less than the specified maximum NSS index for 8… | scalar | Integer32 | .1.3.6.1.4.1.25506.2.75.8.1.1.13 |
| hh3cDot11RRM11acMultiCastNss Specify the NSS index for 802.11ac multicast rates.
The value 0 indicates that no NSS index is specified.
No NSS index is specified for 802.11ac multicast rates by default.
The sp… | scalar | Integer32 | .1.3.6.1.4.1.25506.2.75.8.1.1.14 |
| hh3cDot11RRM11acMultiCastVhtMcs Specify the MCS index for 802.11ac multicast rates.
The value 255 indicates that no MCS index is specified.
No MCS index is specified for 802.11ac multicast rates by default.
Besi… | scalar | Integer32 | .1.3.6.1.4.1.25506.2.75.8.1.1.15 |
| hh3cDot11RRM11nSuptMaxMcs Specify the maximum Modulation and Coding Scheme (MCS) index for
802.11n supported rates.
The specified maximum MCS index for 802.11n supported rates must be no
less than the spec… | scalar | Integer32 | .1.3.6.1.4.1.25506.2.75.8.1.1.2 |
| hh3cDot11RRM11gProtect Enable/Disable dot11g protection. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.75.8.1.1.3 |
| hh3cDot11RRM11aPwrConstrt Configure the power constraint for all 802.11a radios.
The configured power constraint is advertised in beacons if spectrum
management is enabled.
The range of power constraint is… | scalar | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.75.8.1.1.4 |
| hh3cDot11RRM11aSpectrumManag Enable/Disable spectrum management for 802.11a radios.
When spectrum management is enabled, the WLAN sub-system advertises
power capabilities of the AP and power constraints appli… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.75.8.1.1.5 |
| hh3cDot11RRMAutoChlAvoid11h Configure the auto-channel set as non-dot11h channels, this is,
only the non-dot11h channels belonging to the country code are scanned
during initial channel selection and one of … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.75.8.1.1.6 |
| hh3cDot11RRMScanChl Set the scan mode.
auto: When this option is set, all channels of the country code being
set are scanned.
all: When this option is set, all the channels of the radio band ar… | scalar | Enumeration | .1.3.6.1.4.1.25506.2.75.8.1.1.7 |
| hh3cDot11RRMScanRptIntvel Set the scan report interval. | scalar | second Integer32 | .1.3.6.1.4.1.25506.2.75.8.1.1.8 |
| hh3cDot11APInterfNumThreshhd Represents threshold of AP interference .
If the value of AP interference exceeds this threshold,
AP interference trap will be sent. If the value of this node
is zero, AP interfe… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.75.8.1.1.9 |