hh3cDot11APInterfNumThreshhd

HH3C-DOT11-RRM-MIB · .1.3.6.1.4.1.25506.2.75.8.1.1.9
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
Represents threshold of AP interference .
If the value of AP interference exceeds this threshold,
AP interference trap will be sent.  If the value of this node
is zero, AP interference trap will be sent immediately.

Context

MIB
HH3C-DOT11-RRM-MIB
OID
.1.3.6.1.4.1.25506.2.75.8.1.1.9
Type
scalar
Access
readwrite
Status
current
Parent
hh3cDot11RRMGlobalCfgPara
Siblings
14

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cDot11RRM11nMadtMaxMcs
Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is …
scalarInteger32.1.3.6.1.4.1.25506.2.75.8.1.1.1
hh3cDot11StaInterfNumThreshhd
Represents threshold of STA interference. If the value of STA interference exceeds this threshold, STA interference trap will be sent. If the value of this node is zero, STA inte…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.8.1.1.10
hh3cDot11RRM11nMultiCastMcs
Specify the modulation and coding scheme (MCS) index for 802.11n multicast rates. The value 4294967295 indicates that no MCS index is specified. No MCS index is specified for 802.…
scalarUnsigned32.1.3.6.1.4.1.25506.2.75.8.1.1.11
hh3cDot11RRM11acMadtMaxNss
Specify the maximum NSS index for 802.11ac mandatory rates. The value 0 indicates that no maximum NSS index is specified. No maximum NSS index is specified for 802.11ac mandatory …
scalarInteger32.1.3.6.1.4.1.25506.2.75.8.1.1.12
hh3cDot11RRM11acSuptMaxNss
Specify the maximum NSS index for 802.11ac supported rates. The specified maximum NSS index for 802.11ac supported rates must be no less than the specified maximum NSS index for 8…
scalarInteger32.1.3.6.1.4.1.25506.2.75.8.1.1.13
hh3cDot11RRM11acMultiCastNss
Specify the NSS index for 802.11ac multicast rates. The value 0 indicates that no NSS index is specified. No NSS index is specified for 802.11ac multicast rates by default. The sp…
scalarInteger32.1.3.6.1.4.1.25506.2.75.8.1.1.14
hh3cDot11RRM11acMultiCastVhtMcs
Specify the MCS index for 802.11ac multicast rates. The value 255 indicates that no MCS index is specified. No MCS index is specified for 802.11ac multicast rates by default. Besi…
scalarInteger32.1.3.6.1.4.1.25506.2.75.8.1.1.15
hh3cDot11RRM11nSuptMaxMcs
Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the spec…
scalarInteger32.1.3.6.1.4.1.25506.2.75.8.1.1.2
hh3cDot11RRM11gProtect
Enable/Disable dot11g protection.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.8.1.1.3
hh3cDot11RRM11aPwrConstrt
Configure the power constraint for all 802.11a radios. The configured power constraint is advertised in beacons if spectrum management is enabled. The range of power constraint is…
scalardBm SNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.8.1.1.4
hh3cDot11RRM11aSpectrumManag
Enable/Disable spectrum management for 802.11a radios. When spectrum management is enabled, the WLAN sub-system advertises power capabilities of the AP and power constraints appli…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.8.1.1.5
hh3cDot11RRMAutoChlAvoid11h
Configure the auto-channel set as non-dot11h channels, this is, only the non-dot11h channels belonging to the country code are scanned during initial channel selection and one of …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.8.1.1.6
hh3cDot11RRMScanChl
Set the scan mode. auto: When this option is set, all channels of the country code being set are scanned. all: When this option is set, all the channels of the radio band ar…
scalarEnumeration.1.3.6.1.4.1.25506.2.75.8.1.1.7
hh3cDot11RRMScanRptIntvel
Set the scan report interval.
scalarsecond Integer32.1.3.6.1.4.1.25506.2.75.8.1.1.8