h3cdeNodeVendorID

H3C-SNA-DLSW-EXT-MIB · .1.3.6.1.4.1.2011.10.2.62.1.1.1
MIB view Table view

Object

scalar r/w OctetString 
The value identifies the manufacturer's IEEE-assigned
Organizationally Unique Identifier (OUI) of this DLSw.
This information is reported in DLSw Capabilities
Exchange.

Context

MIB
H3C-SNA-DLSW-EXT-MIB
OID
.1.3.6.1.4.1.2011.10.2.62.1.1.1
Type
scalar
Access
readwrite
Status
current
Parent
h3cdeNode
Siblings
20

Syntax

OctetString

Values & Constraints

Object Constraints
range: 3-3

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cdeNodeLocalPendTimeout
Define connected state timer.
scalarseconds Integer32.1.3.6.1.4.1.2011.10.2.62.1.1.10
h3cdeNodeRemotePendTimeout
Define connected state timer.
scalarseconds Integer32.1.3.6.1.4.1.2011.10.2.62.1.1.11
h3cdeNodeSnaCacheTimeout
Define connected state timer.
scalarseconds Integer32.1.3.6.1.4.1.2011.10.2.62.1.1.12
h3cdeNodeExplorerTimeout
Define explorer timer.
scalarseconds Integer32.1.3.6.1.4.1.2011.10.2.62.1.1.13
h3cdeNodeExplorerWaitTimeout
Define explorer waiting timer.
scalarseconds Integer32.1.3.6.1.4.1.2011.10.2.62.1.1.14
h3cdeNodeConfigSapList
The SAP list indicates which SAPs are allowed. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the …
scalarOctetString.1.3.6.1.4.1.2011.10.2.62.1.1.15
h3cdeNodeMaxTransmission
The maximum retry times for TCP packet. Default value is 5.
scalarInteger32.1.3.6.1.4.1.2011.10.2.62.1.1.16
h3cdeNodeMulticastStatus
Multicast support status. It is disabled by default.
scalarEnumeration.1.3.6.1.4.1.2011.10.2.62.1.1.17
h3cdeNodeMulticastAddress
Multicast address. Default is 224.0.10.0. When the h3cdeNodeMulticastStatus is disabled, the multicast address is reset to 0.0.0.0.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.10.2.62.1.1.18
h3cdeNodeResetTcpAll
Reset all TCP circuit switch. Any return value is meaningless.
scalarEnumeration.1.3.6.1.4.1.2011.10.2.62.1.1.19
h3cdeNodeIpAddrType
The type of ip address: IPv4 or IPv6.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.10.2.62.1.1.2
h3cdeNodeStCapTcpNum
Tcp number reported in DLSw Capabilities Exchange.
scalarInteger32.1.3.6.1.4.1.2011.10.2.62.1.1.20
h3cdeNodeTcpQueueMax
The max length of TCP queue.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.62.1.1.21
h3cdeNodeLocalAddr
Local peer ip address. This ip address must have been configured for a port on the router. If no local peer ip address is configured, then this object will be the empty string.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.10.2.62.1.1.3
h3cdeNodePriority
Peer priority advertised to remote peers in the DLSw Capabilities Exchange. If an end station can reach through more than one peer, the priority of each peer will be considered wh…
scalarInteger32.1.3.6.1.4.1.2011.10.2.62.1.1.4
h3cdeNodeInitPacingWindow
Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in …
scalarpackets Integer32.1.3.6.1.4.1.2011.10.2.62.1.1.5
h3cdeNodeMaxPacingWindow
Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congest…
scalarpackets Integer32.1.3.6.1.4.1.2011.10.2.62.1.1.6
h3cdeNodeKeepAliveInterval
Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DLSw t…
scalarseconds Integer32.1.3.6.1.4.1.2011.10.2.62.1.1.7
h3cdeNodePermitDynamic
To accept connections from non-configured remote peer when permitDynamic is specified.
scalarEnumeration.1.3.6.1.4.1.2011.10.2.62.1.1.8
h3cdeNodeConnTimeout
Define connected state timer.
scalarseconds Integer32.1.3.6.1.4.1.2011.10.2.62.1.1.9