h3cdeNodeInitPacingWindow
H3C-SNA-DLSW-EXT-MIB ·
.1.3.6.1.4.1.2011.10.2.62.1.1.5
Object
scalar
r/w
packets Integer32
Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement. A value of 65535 indicates the value is meaningless.
Context
- MIB
- H3C-SNA-DLSW-EXT-MIB
- OID
.1.3.6.1.4.1.2011.10.2.62.1.1.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- packets
- Parent
- h3cdeNode
- Siblings
- 20
Syntax
packets Integer32
Values & Constraints
Object Constraints
range: 1-2000
range: 65535-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cdeNodeVendorID The value identifies the manufacturer's IEEE-assigned
Organizationally Unique Identifier (OUI) of this DLSw.
This information is reported in DLSw Capabilities
Exchange. | scalar | OctetString | .1.3.6.1.4.1.2011.10.2.62.1.1.1 |
| h3cdeNodeLocalPendTimeout Define connected state timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.10 |
| h3cdeNodeRemotePendTimeout Define connected state timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.11 |
| h3cdeNodeSnaCacheTimeout Define connected state timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.12 |
| h3cdeNodeExplorerTimeout Define explorer timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.13 |
| h3cdeNodeExplorerWaitTimeout Define explorer waiting timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.14 |
| h3cdeNodeConfigSapList The SAP list indicates which SAPs are allowed.
Only SAPs with even numbers are represented,
in the form of the most significant bit of the first
octet representing the SAP 0, the … | scalar | OctetString | .1.3.6.1.4.1.2011.10.2.62.1.1.15 |
| h3cdeNodeMaxTransmission The maximum retry times for TCP packet.
Default value is 5. | scalar | Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.16 |
| h3cdeNodeMulticastStatus Multicast support status. It is disabled by default. | scalar | Enumeration | .1.3.6.1.4.1.2011.10.2.62.1.1.17 |
| h3cdeNodeMulticastAddress Multicast address. Default is 224.0.10.0.
When the h3cdeNodeMulticastStatus is disabled,
the multicast address is reset to 0.0.0.0. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.10.2.62.1.1.18 |
| h3cdeNodeResetTcpAll Reset all TCP circuit switch.
Any return value is meaningless. | scalar | Enumeration | .1.3.6.1.4.1.2011.10.2.62.1.1.19 |
| h3cdeNodeIpAddrType The type of ip address: IPv4 or IPv6. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.10.2.62.1.1.2 |
| h3cdeNodeStCapTcpNum Tcp number reported in DLSw Capabilities Exchange. | scalar | Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.20 |
| h3cdeNodeTcpQueueMax The max length of TCP queue. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.62.1.1.21 |
| h3cdeNodeLocalAddr Local peer ip address. This ip address must have been
configured for a port on the router. If no local peer
ip address is configured, then this object will be the
empty string. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.10.2.62.1.1.3 |
| h3cdeNodePriority Peer priority advertised to remote peers in the DLSw Capabilities
Exchange. If an end station can reach through more
than one peer, the priority of each peer will be considered wh… | scalar | Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.4 |
| h3cdeNodeMaxPacingWindow Maximum pacing window size. This is the largest size that
the pacing window will grow to. DLSw uses an adaptive pacing
flow control algorithm that automatically adjusts to congest… | scalar | packets Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.6 |
| h3cdeNodeKeepAliveInterval Default remote peer keepalive interval in seconds.
The keepalive parameter refers to how often DLSw peers
send peer keep alives to each other. These periodic messages
allow DLSw t… | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.7 |
| h3cdeNodePermitDynamic To accept connections from non-configured remote peer when
permitDynamic is specified. | scalar | Enumeration | .1.3.6.1.4.1.2011.10.2.62.1.1.8 |
| h3cdeNodeConnTimeout Define connected state timer. | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.10.2.62.1.1.9 |