h3cIKETunRemoteValue1
H3C-IKE-MONITOR-MIB ·
.1.3.6.1.4.1.2011.10.2.30.1.1.1.7
Object
column
SNMPv2-TCDisplayString
The value of the remote peer identity.
If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address
used to identify the remote peer.
If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is
the subnet address.
If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is
the beginning IP address of the range.
If the remote peer type is fqdn/userFqdn, this is the host name
used to identify the remote peer.
If the remote peer type is derAsn1Dn, this is the binary DER
encoding of an ASN.1 X.500 Distinguished Name [X.501] of the
principal whose certificates are being exchanged to establish
the SA.
If the remote peer type is derAsn1Gn, this is the binary DER
encoding of an ASN.1 X.500 GeneralName [X.509] of the principal
whose certificates are being exchanged to establish the SA.
If the remote peer type is keyId, this is an opaque byte
stream which may be used to pass vendor-specific information
necessary to identify which pre-shared key should be used to
authenticate Aggressive mode negotiations.
Context
- MIB
- H3C-IKE-MONITOR-MIB
- OID
.1.3.6.1.4.1.2011.10.2.30.1.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- h3cIKETunnelEntry
- Table
- h3cIKETunnelTable
- Siblings
- 25
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cIKETunIndex The index of the IPsec Phase-1 IKE Tunnel Table.
The value of the index is a number which begins
at one and is incremented with each tunnel that
is created. The value of this obje… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.30.1.1.1.1 |
| h3cIKETunInitiator The initiator of this tunnel. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.30.1.1.1.10 |
| h3cIKETunNegoMode The negotiation mode of the IPsec Phase-1 IKE Tunnel. | column | H3cIKENegoMode | .1.3.6.1.4.1.2011.10.2.30.1.1.1.11 |
| h3cIKETunDiffHellmanGrp The Diffie Hellman Group used in the IPsec Phase-1 IKE
negotiations. | column | H3cDiffHellmanGrp | .1.3.6.1.4.1.2011.10.2.30.1.1.1.12 |
| h3cIKETunEncryptAlgo The encryption algorithm used in the IPsec Phase-1 IKE
negotiations. | column | H3cEncryptAlgo | .1.3.6.1.4.1.2011.10.2.30.1.1.1.13 |
| h3cIKETunHashAlgo The hash algorithm used in the IPsec Phase-1 IKE
negotiations. | column | H3cAuthAlgo | .1.3.6.1.4.1.2011.10.2.30.1.1.1.14 |
| h3cIKETunAuthMethod The authentication method used in the IPsec Phase-1
IKE negotiations. | column | H3cIKEAuthMethod | .1.3.6.1.4.1.2011.10.2.30.1.1.1.15 |
| h3cIKETunLifeTime The negotiated LifeTime of the IPsec Phase-1
IKE Tunnel in seconds. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.30.1.1.1.16 |
| h3cIKETunActiveTime The duration the IPsec Phase-1 IKE tunnel
has been active in seconds. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.30.1.1.1.17 |
| h3cIKETunRemainTime The security association remaining time in
seconds. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.30.1.1.1.18 |
| h3cIKETunTotalRefreshes The total number of security association
refreshing performed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.10.2.30.1.1.1.19 |
| h3cIKETunLocalType The type of local peer identity. | column | H3cIKEIDType | .1.3.6.1.4.1.2011.10.2.30.1.1.1.2 |
| h3cIKETunState The State of IKE Tunnel. | column | H3cIKETunnelState | .1.3.6.1.4.1.2011.10.2.30.1.1.1.20 |
| h3cIKETunDpdIntervalTime The time that trigger DPD request.
If ipsec message is expected to be sent out
and the interval time between current time
and the last time receiving peer's IPsec
message is bigge… | column | second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.30.1.1.1.21 |
| h3cIKETunDpdTimeOut The overtime of single DPD request.
If DPD requests are refused three times, all
security associations related would be deleted. | column | second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.30.1.1.1.22 |
| h3cIKETunLocalInetAddrType The type of the local peer's IP address. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.10.2.30.1.1.1.23 |
| h3cIKETunLocalInetAddr The IP address of the local peer for the IPsec Phase-1 IKE Tunnel. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.10.2.30.1.1.1.24 |
| h3cIKETunRemoteInetAddrType The type of the remote peer's IP address. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.10.2.30.1.1.1.25 |
| h3cIKETunRemoteInetAddr The IP address of the remote peer for the IPsec Phase-1 IKE Tunnel. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.10.2.30.1.1.1.26 |
| h3cIKETunLocalValue1 The value of the local peer identity.
If the local peer type is ipv4Addr/ipv6Addr, this is the IP address
used to identify the local peer.
If the loc… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.10.2.30.1.1.1.3 |
| h3cIKETunLocalValue2 The second specification of the local peer's IP address.
If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this
is the subnet mask.
If the loc… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.10.2.30.1.1.1.4 |
| h3cIKETunLocalAddr deprecated The IP address of the local endpoint for the IPsec
Phase-1 IKE Tunnel. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.10.2.30.1.1.1.5 |
| h3cIKETunRemoteType The type of remote peer identity. | column | H3cIKEIDType | .1.3.6.1.4.1.2011.10.2.30.1.1.1.6 |
| h3cIKETunRemoteValue2 The second specification of the remote peer's IP address.
If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this
is the subnet mask.
If the r… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.10.2.30.1.1.1.8 |
| h3cIKETunRemoteAddr deprecated The IP address of the remote peer for the IPsec
Phase-1 IKE Tunnel. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.10.2.30.1.1.1.9 |