H3C-IKE-MONITOR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
42

h3cIKETunnelTable

table
.1.3.6.1.4.1.2011.10.2.30.1.1 · 1 row entry · 26 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIKETunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IKE-MONITOR-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IKE-MONITOR-MIB::h3cIKETunnelTable' 
The IPsec Phase-1 Internet Key Exchange Tunnel Table.
There is one entry in this table for each active IPsec Phase-1 IKE Tunnel.
h3cIKETunnelEntry row .1.3.6.1.4.1.2011.10.2.30.1.1.1
The entry contains the information about h3cIKETunnelTable, such as negotiate mode,
encryption algorithm and authentication algorithm, etc.
Indexes
Column Syntax OID
h3cIKETunIndex
The index of the IPsec Phase-1 IKE Tunnel Table.
The value of the index is a number which begins
at one and is incremented with each tunnel that
is created. The value of this object will wrap
at 2147483647.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.1
h3cIKETunLocalType
The type of local peer identity.
H3cIKEIDType
Type Values:
0reserved
1ipv4Addr
2fqdn
3userFqdn
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
9derAsn1Dn
10derAsn1Gn
11keyId
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.2
h3cIKETunLocalValue1
The value of the local peer identity.

If the local peer type is ipv4Addr/ipv6Addr, this is the IP address
used to identify the local peer.

If the local peer type is ipv4AddrSubnet/ipv6AddrS…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.3
h3cIKETunLocalValue2
The second specification of the local peer's IP address.

If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this
is the subnet mask.

If the local peer type is ipv4AddrRange/ipv6AddrRa…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.4
h3cIKETunLocalAddrdeprecated
The IP address of the local endpoint for the IPsec
Phase-1 IKE Tunnel.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.5
h3cIKETunRemoteType
The type of remote peer identity.
H3cIKEIDType
Type Values:
0reserved
1ipv4Addr
2fqdn
3userFqdn
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
9derAsn1Dn
10derAsn1Gn
11keyId
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.6
h3cIKETunRemoteValue1
The value of the remote peer identity.

If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address
used to identify the remote peer.

If the remote peer type is ipv4AddrSubnet/ipv6A…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.7
h3cIKETunRemoteValue2
The second specification of the remote peer's IP address.

If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this
is the subnet mask.

If the remote peer type is ipv4AddrRange/ipv6Add…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.8
h3cIKETunRemoteAddrdeprecated
The IP address of the remote peer for the IPsec
Phase-1 IKE Tunnel.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.9
h3cIKETunInitiator
The initiator of this tunnel.
Enumeration
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.10
h3cIKETunNegoMode
The negotiation mode of the IPsec Phase-1 IKE Tunnel.
H3cIKENegoMode
Type Values:
2mainMode
4aggressiveMode
32quickMode
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.11
h3cIKETunDiffHellmanGrp
The Diffie Hellman Group used in the IPsec Phase-1 IKE
negotiations.
H3cDiffHellmanGrp
Type Values:
0none
1dhGroup1
2dhGroup2
5dhGroup5
14dhGroup14
24dhGroup24
2147483647invalidGroup
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.12
h3cIKETunEncryptAlgo
The encryption algorithm used in the IPsec Phase-1 IKE
negotiations.
H3cEncryptAlgo
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripleDesCbc
6castCbc
7aesCbc
8aesCbc128
9aesCbc192
10aesCbc256
11aesCtr
12aesCamelliaCbc
13rc4
2147483647invalidAlg
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.13
h3cIKETunHashAlgo
The hash algorithm used in the IPsec Phase-1 IKE
negotiations.
H3cAuthAlgo
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.14
h3cIKETunAuthMethod
The authentication method used in the IPsec Phase-1
IKE negotiations.
H3cIKEAuthMethod
Type Values:
1preSharedKey
2dsaSignatures
3rsaSignatures
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.15
h3cIKETunLifeTime
The negotiated LifeTime of the IPsec Phase-1
IKE Tunnel in seconds.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.16
h3cIKETunActiveTime
The duration the IPsec Phase-1 IKE tunnel
has been active in seconds.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.17
h3cIKETunRemainTime
The security association remaining time in
seconds.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.18
h3cIKETunTotalRefreshes
The total number of security association
refreshing performed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.19
h3cIKETunState
The State of IKE Tunnel.
H3cIKETunnelState
Type Values:
1active
2timeout
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.20
h3cIKETunDpdIntervalTime
The time that trigger DPD request.
If ipsec message is expected to be sent out
and the interval time between current time
and the last time receiving peer's IPsec
message is bigger than this time, DPD request
would be t…
secondSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.21
h3cIKETunDpdTimeOut
The overtime of single DPD request.
If DPD requests are refused three times, all
security associations related would be deleted.
secondSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.22
h3cIKETunLocalInetAddrType
The type of the local peer's IP address.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.23
h3cIKETunLocalInetAddr
The IP address of the local peer for the IPsec Phase-1 IKE Tunnel.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.24
h3cIKETunRemoteInetAddrType
The type of the remote peer's IP address.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.25
h3cIKETunRemoteInetAddr
The IP address of the remote peer for the IPsec Phase-1 IKE Tunnel.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.30.1.1.1.26

h3cIKETunnelStatTable

table
.1.3.6.1.4.1.2011.10.2.30.1.2 · 1 row entry · 16 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIKETunnelStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IKE-MONITOR-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IKE-MONITOR-MIB::h3cIKETunnelStatTable' 
The IPsec Phase-1 IKE Tunnel Statistic Table.
h3cIKETunnelStatEntry row .1.3.6.1.4.1.2011.10.2.30.1.2.1
The entry contains the information of h3cIKETunnelStatTable,
such as the number of packets sent and received by the
IKE tunnel, etc.
Indexes
Column Syntax OID
h3cIKETunInOctets
The total number of octets received by
this IPsec Phase-1 IKE Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.1
h3cIKETunInPkts
The total number of packets received by
this IPsec Phase-1 IKE Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.2
h3cIKETunInDropPkts
The total number of packets dropped by this
IPsec Phase-1 IKE Tunnel during receiving process.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.3
h3cIKETunInP2Exchgs
The total number of IPsec Phase-2 exchanges
received by this IPsec Phase-1 IKE Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.4
h3cIKETunInP2ExchgRejets
The total number of IPsec Phase-2 exchanges
received and rejected by this IPsec Phase-1 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.5
h3cIKETunInP2SaDelRequests
The total number of IPsec Phase-2 security association
deleting requests received by this IPsec Phase-1 IKE Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.6
h3cIKETunInP1SaDelRequests
The total number of IPsec Phase-1
security association deleting requests.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.7
h3cIKETunInNotifys
The total number of notifications received by this
IPsec Phase-1 IKE Tunnel.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.8
h3cIKETunOutOctets
The total number of octets sent by this IPsec
Phase-1 IKE Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.9
h3cIKETunOutPkts
The total number of packets sent by this IPsec
Phase-1 IKE Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.10
h3cIKETunOutDropPkts
The total number of packets dropped by this
IPsec Phase-1 IKE Tunnel during sending process.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.11
h3cIKETunOutP2Exchgs
The total number of IPsec Phase-2 exchanges sent
by this IPsec Phase-1 IKE Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.12
h3cIKETunOutP2ExchgRejects
The total number of IPsec Phase-2 exchanges sent
and rejected by this IPsec Phase-1 IKE Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.13
h3cIKETunOutP2SaDelRequests
The total number of IPsec Phase-2 security
association deleting requests sent by this
IPsec Phase-1 IKE Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.14
h3cIKETunOutP1SaDelRequests
The total number of IPsec Phase-1 security
association deleting requests sent by this
IPsec Phase-1 IKE Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.15
h3cIKETunOutNotifys
The total number of notifications sent by this IPsec
Phase-1 Tunnel.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.30.1.2.1.16