h3cIKETunDpdTimeOut

H3C-IKE-MONITOR-MIB · .1.3.6.1.4.1.2011.10.2.30.1.1.1.22
MIB view Table view

Object

column second SNMPv2-SMIInteger32 
The overtime of single DPD request.
If DPD requests are refused three times, all
security associations related would be deleted.

Context

MIB
H3C-IKE-MONITOR-MIB
OID
.1.3.6.1.4.1.2011.10.2.30.1.1.1.22
Type
column
Access
readonly
Status
current
Units
second
Parent
h3cIKETunnelEntry
Table
h3cIKETunnelTable
Siblings
25

Syntax

second SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cIKETunIndex
The index of the IPsec Phase-1 IKE Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this obje…
columnInteger32.1.3.6.1.4.1.2011.10.2.30.1.1.1.1
h3cIKETunInitiator
The initiator of this tunnel.
columnEnumeration.1.3.6.1.4.1.2011.10.2.30.1.1.1.10
h3cIKETunNegoMode
The negotiation mode of the IPsec Phase-1 IKE Tunnel.
columnH3cIKENegoMode.1.3.6.1.4.1.2011.10.2.30.1.1.1.11
h3cIKETunDiffHellmanGrp
The Diffie Hellman Group used in the IPsec Phase-1 IKE negotiations.
columnH3cDiffHellmanGrp.1.3.6.1.4.1.2011.10.2.30.1.1.1.12
h3cIKETunEncryptAlgo
The encryption algorithm used in the IPsec Phase-1 IKE negotiations.
columnH3cEncryptAlgo.1.3.6.1.4.1.2011.10.2.30.1.1.1.13
h3cIKETunHashAlgo
The hash algorithm used in the IPsec Phase-1 IKE negotiations.
columnH3cAuthAlgo.1.3.6.1.4.1.2011.10.2.30.1.1.1.14
h3cIKETunAuthMethod
The authentication method used in the IPsec Phase-1 IKE negotiations.
columnH3cIKEAuthMethod.1.3.6.1.4.1.2011.10.2.30.1.1.1.15
h3cIKETunLifeTime
The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel in seconds.
columnInteger32.1.3.6.1.4.1.2011.10.2.30.1.1.1.16
h3cIKETunActiveTime
The duration the IPsec Phase-1 IKE tunnel has been active in seconds.
columnInteger32.1.3.6.1.4.1.2011.10.2.30.1.1.1.17
h3cIKETunRemainTime
The security association remaining time in seconds.
columnInteger32.1.3.6.1.4.1.2011.10.2.30.1.1.1.18
h3cIKETunTotalRefreshes
The total number of security association refreshing performed.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.2.30.1.1.1.19
h3cIKETunLocalType
The type of local peer identity.
columnH3cIKEIDType.1.3.6.1.4.1.2011.10.2.30.1.1.1.2
h3cIKETunState
The State of IKE Tunnel.
columnH3cIKETunnelState.1.3.6.1.4.1.2011.10.2.30.1.1.1.20
h3cIKETunDpdIntervalTime
The time that trigger DPD request. If ipsec message is expected to be sent out and the interval time between current time and the last time receiving peer's IPsec message is bigge…
columnsecond SNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.30.1.1.1.21
h3cIKETunLocalInetAddrType
The type of the local peer's IP address.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.10.2.30.1.1.1.23
h3cIKETunLocalInetAddr
The IP address of the local peer for the IPsec Phase-1 IKE Tunnel.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.10.2.30.1.1.1.24
h3cIKETunRemoteInetAddrType
The type of the remote peer's IP address.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.10.2.30.1.1.1.25
h3cIKETunRemoteInetAddr
The IP address of the remote peer for the IPsec Phase-1 IKE Tunnel.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.10.2.30.1.1.1.26
h3cIKETunLocalValue1
The value of the local peer identity. If the local peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the local peer. If the loc…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.10.2.30.1.1.1.3
h3cIKETunLocalValue2
The second specification of the local peer's IP address. If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the loc…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.10.2.30.1.1.1.4
h3cIKETunLocalAddr deprecated
The IP address of the local endpoint for the IPsec Phase-1 IKE Tunnel.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.10.2.30.1.1.1.5
h3cIKETunRemoteType
The type of remote peer identity.
columnH3cIKEIDType.1.3.6.1.4.1.2011.10.2.30.1.1.1.6
h3cIKETunRemoteValue1
The value of the remote peer identity. If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the remote peer. If the …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.10.2.30.1.1.1.7
h3cIKETunRemoteValue2
The second specification of the remote peer's IP address. If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the r…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.10.2.30.1.1.1.8
h3cIKETunRemoteAddr deprecated
The IP address of the remote peer for the IPsec Phase-1 IKE Tunnel.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.10.2.30.1.1.1.9