h3cDot11SaTrapIntfDevType

H3C-DOT11-SA-MIB · .1.3.6.1.4.1.2011.10.2.75.13.3.1.4

MIB view Table view

Object

scalar H3C-DOT11-REF-MIBH3cDot11SaIntfDevType

Represents type of the interferer.

Context

MIB: H3C-DOT11-SA-MIB
OID: .1.3.6.1.4.1.2011.10.2.75.13.3.1.4
Type: scalar
Access: notifyonly
Status: current
Parent: h3cDot11SaTrapVars
Siblings: 11

Syntax

H3C-DOT11-REF-MIBH3cDot11SaIntfDevType

Source: H3C-DOT11-REF-MIBH3cDot11SaIntfDevType
Base type: Enumeration

Values & Constraints

Type Values

`1`	microwave
`2`	microwaveInverter
`3`	bluetooth
`4`	fixedFreqOthers
`5`	fixedFreqCordlessPhone
`6`	fixedFreqVideo
`7`	fixedFreqAudio
`8`	freqHopperOthers
`9`	freqHopperCordlessBase
`10`	freqHopperCordlessNetwork
`11`	freqHopperXbox
`12`	genericInterferer

Related Objects

Sibling Objects

Object	Type	Syntax	OID
h3cDot11SaTrapAPID Represents the identifier of the AP.	scalar	H3C-DOT11-REF-MIBH3cDot11ObjectIDType	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.1`
h3cDot11SaTrapChlNum Represents the radio channel where the air quality is monitored.	scalar	H3C-DOT11-REF-MIBH3cDot11ChannelScopeType	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.10`
h3cDot11SaTrapChlQlt Represents the quality for this radio channel.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.11`
h3cDot11SaTrapChlIntfNum Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.12`
h3cDot11SaTrapRadioID Represents the identifier of the radio.	scalar	H3C-DOT11-REF-MIBH3cDot11RadioScopeType	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.2`
h3cDot11SaTrapDevID Represents the device identification number that uniquely identified the interfering device.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.3`
h3cDot11APTrapDevSI Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.5`
h3cDot11SaTrapDevRSSI Represents receive signal strength indicator (RSSI) of interfering device.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.6`
h3cDot11APTrapDevDC Represents proportion of time in percentage during which the interfering device was active.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.7`
h3cDot11APTrapDevChls Represents channels that the interfering device affects.	scalar	OctetString	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.8`
h3cDot11APTrapDevDctTime Represents time at which the interference was detected.	scalar	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.2011.10.2.75.13.3.1.9`