H3C-DOT11-SA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
31

h3cDot11SaCfgTable

table
.1.3.6.1.4.1.2011.10.2.75.13.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11SaCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-SA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-SA-MIB::h3cDot11SaCfgTable' 
This table is used to configure spectrum analysis.
h3cDot11SaCfgEntry row .1.3.6.1.4.1.2011.10.2.75.13.1.1.1
This entry contains the spectrum analysis configuration.
Indexes
Column Syntax OID
h3cDot11SaCfgRadioType
Represents the radio type of the configuration.
Enumeration
Enumerated Values:
1dot11bg
2dot11a
 .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.1
h3cDot11SaEnable
Represents whether spectrum analysis is enabled globally.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.2
h3cDot11SaRptDevType
Represents which types of interference devices should be reported.
Bitsr/w
Enumerated Values:
0microwave
1microwaveInverter
2bluetooth
3fixedFreqOthers
4fixedFreqCordlessPhone
5fixedFreqVideo
6fixedFreqAudio
7freqHopperOthers
8freqHopperCordlessBase
9freqHopperCordlessNetwork
10freqHopperXbox
11genericInterferer
 .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.3
h3cDot11SaTrapDevEnable
Represents whether the interference device trap is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.4
h3cDot11SaTrapDevType
Represents which types of interference device will send traps
when the interference device trap is enabled.
Bitsr/w
Enumerated Values:
0microwave
1microwaveInverter
2bluetooth
3fixedFreqOthers
4fixedFreqCordlessPhone
5fixedFreqVideo
6fixedFreqAudio
7freqHopperOthers
8freqHopperCordlessBase
9freqHopperCordlessNetwork
10freqHopperXbox
11genericInterferer
 .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.5
h3cDot11SaTrapAQEnable
Represents whether the air quality trap is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.6
h3cDot11SaTrapAQThreshold
Represents the air quality trap threshold. When the air quality
is below this value, the air quality trap will be sent.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.7
h3cDot11SaDrivenRRMEnable
Configure whether to trigger RRM to run when an access point detects
a certain level of interference.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.8
h3cDot11SaDrivenRRMSnt
Configure the threshold at which RRM will be triggered. When the
interference level for the access point rises above the threshold
level, RRM initiates a local dynamic channel assignment (DCA) run
and changes the chann…
Enumerationr/w
Enumerated Values:
1low
2medium
3high
 .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.9

h3cDot11SaRtFFTDataTable

table
.1.3.6.1.4.1.2011.10.2.75.13.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11SaRtFFTDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-SA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-SA-MIB::h3cDot11SaRtFFTDataTable' 
This table contains the real-time FFT data for spectrum analysis.
h3cDot11SaRtFFTDataEntry row .1.3.6.1.4.1.2011.10.2.75.13.2.1.1
This entry contains the real-time FFT data for spectrum analysis.
Indexes
Column Syntax OID
h3cDot11SaAPID
Represents the serial ID of the AP.
H3C-DOT11-REF-MIBH3cDot11ObjectIDType
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.2011.10.2.75.13.2.1.1.1
h3cDot11SaRadioID
Represents the ID of the radio.
H3C-DOT11-REF-MIBH3cDot11RadioScopeType .1.3.6.1.4.1.2011.10.2.75.13.2.1.1.2
h3cDot11SaRtDataGroupID
Represents group ID of the collected data. Maybe the device collects
multiple groups of data at the collected interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.1.1.3
h3cDot11SaFrequency
Represents the frequency number in 100 Hz.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.1.1.4
h3cDot11SaRtFreqPower
Represents the power of the frequency point.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.1.1.5
h3cDot11SaRtFreqMaxPower
Represents the max power of the frequency point.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.1.1.6
h3cDot11SaRtFreqDutyCycle
Represents the duty cycle of the frequency point.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.1.1.7
h3cDot11SaRtFreqDataSeqNo
Represents the sequence number of the data.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.75.13.2.1.1.8

h3cDot11SaIntfDevTable

table
.1.3.6.1.4.1.2011.10.2.75.13.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11SaIntfDevTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-SA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-SA-MIB::h3cDot11SaIntfDevTable' 
This table contains the information of the interfering devices.
h3cDot11SaIntfDevEntry row .1.3.6.1.4.1.2011.10.2.75.13.2.2.1
This entry contains the information of the interfering devices.
Indexes
Column Syntax OID
h3cDot11SaDevID
Represents the device identification number that uniquely
identified the interfering device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.2.1.1
h3cDot11SaDevType
Represents type of the interferer.
H3C-DOT11-REF-MIBH3cDot11SaIntfDevType
Type Values:
1microwave
2microwaveInverter
3bluetooth
4fixedFreqOthers
5fixedFreqCordlessPhone
6fixedFreqVideo
7fixedFreqAudio
8freqHopperOthers
9freqHopperCordlessBase
10freqHopperCordlessNetwork
11freqHopperXbox
12genericInterferer
 .1.3.6.1.4.1.2011.10.2.75.13.2.2.1.2
h3cDot11SaDevSI
Represents severity index of the interfering device. Severity index
is calculated, a positive integer between 0 and 100(with 100 being the
most severe).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.2.1.3
h3cDot11SaDevRSSI
Represents receive signal strength indicator (RSSI) of interfering
device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.2.1.4
h3cDot11SaDevDutyCycle
Represents proportion of time in percentage during which the
interfering device was active.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.2.1.5
h3cDot11SaDevAffectedChls
Represents channels that the interfering device affects.
OctetString .1.3.6.1.4.1.2011.10.2.75.13.2.2.1.6
h3cDot11SaDevDetectedTime
Represents time at which the interference was detected.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.10.2.75.13.2.2.1.7

h3cDot11SaAirQualityTable

table
.1.3.6.1.4.1.2011.10.2.75.13.2.3 · 1 row entry · 7 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11SaAirQualityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-SA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-SA-MIB::h3cDot11SaAirQualityTable' 
This table contains the air quality of the channels.
h3cDot11SaAirQualityEntry row .1.3.6.1.4.1.2011.10.2.75.13.2.3.1
This entry contains the air quality of the channels.
Indexes
Column Syntax OID
h3cDot11SaChlNum
Represents the radio channel where the air quality is monitored.
H3C-DOT11-REF-MIBH3cDot11ChannelScopeType .1.3.6.1.4.1.2011.10.2.75.13.2.3.1.1
h3cDot11SaAvgQuality
Represents the average air quality for this radio channel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.3.1.2
h3cDot11SaMinQuality
Represents the minimum air quality for this radio channel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.3.1.3
h3cDot11SaIntfDevNum
Represents the number of interferers detected by the radios
on the 802.11a/n or 802.11b/g/n radio band.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.3.1.4
h3cDot11SaWiFiUtil
Represents the percentage of the channel currently being
used by Wi-Fi devices.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.3.1.5
h3cDot11SaNonWiFiUtil
Represents the percentage of the channel currently being
used by non-Wi-Fi interference.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.3.1.6
h3cDot11SaNoiseFloor
Represents current noise floor recorded on the channel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.75.13.2.3.1.7