h3cDot11SaDrivenRRMSnt
H3C-DOT11-SA-MIB ·
.1.3.6.1.4.1.2011.10.2.75.13.1.1.1.9
Object
column
r/w
Enumeration
Configure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity.
Context
- MIB
- H3C-DOT11-SA-MIB
- OID
.1.3.6.1.4.1.2011.10.2.75.13.1.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cDot11SaCfgEntry
- Table
- h3cDot11SaCfgTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | low |
2 | medium |
3 | high |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11SaCfgRadioType Represents the radio type of the configuration. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.1 |
| h3cDot11SaEnable Represents whether spectrum analysis is enabled globally. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.2 |
| h3cDot11SaRptDevType Represents which types of interference devices should be reported. | column | Bits | .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.3 |
| h3cDot11SaTrapDevEnable Represents whether the interference device trap is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.4 |
| h3cDot11SaTrapDevType Represents which types of interference device will send traps
when the interference device trap is enabled. | column | Bits | .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.5 |
| h3cDot11SaTrapAQEnable Represents whether the air quality trap is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.6 |
| h3cDot11SaTrapAQThreshold Represents the air quality trap threshold. When the air quality
is below this value, the air quality trap will be sent. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.7 |
| h3cDot11SaDrivenRRMEnable Configure whether to trigger RRM to run when an access point detects
a certain level of interference. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.13.1.1.1.8 |