h3cDot11APTrapDevDC
H3C-DOT11-SA-MIB ·
.1.3.6.1.4.1.2011.10.2.75.13.3.1.7
Object
scalar
SNMPv2-SMIInteger32
Represents proportion of time in percentage during which the interfering device was active.
Context
- MIB
- H3C-DOT11-SA-MIB
- OID
.1.3.6.1.4.1.2011.10.2.75.13.3.1.7- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- h3cDot11SaTrapVars
- Siblings
- 11
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11SaTrapAPID Represents the identifier of the AP. | scalar | H3C-DOT11-REF-MIBH3cDot11ObjectIDType | .1.3.6.1.4.1.2011.10.2.75.13.3.1.1 |
| h3cDot11SaTrapChlNum Represents the radio channel where the air quality is monitored. | scalar | H3C-DOT11-REF-MIBH3cDot11ChannelScopeType | .1.3.6.1.4.1.2011.10.2.75.13.3.1.10 |
| h3cDot11SaTrapChlQlt Represents the quality for this radio channel. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.13.3.1.11 |
| h3cDot11SaTrapChlIntfNum Represents the number of interferers detected by the radios
on the 802.11a/n or 802.11b/g/n radio band. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.13.3.1.12 |
| h3cDot11SaTrapRadioID Represents the identifier of the radio. | scalar | H3C-DOT11-REF-MIBH3cDot11RadioScopeType | .1.3.6.1.4.1.2011.10.2.75.13.3.1.2 |
| h3cDot11SaTrapDevID Represents the device identification number that uniquely
identified the interfering device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.13.3.1.3 |
| h3cDot11SaTrapIntfDevType Represents type of the interferer. | scalar | H3C-DOT11-REF-MIBH3cDot11SaIntfDevType | .1.3.6.1.4.1.2011.10.2.75.13.3.1.4 |
| h3cDot11APTrapDevSI Represents severity index of the interfering device. Severity index
is calculated, a positive integer between 0 and 100(with 100 being the
most severe). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.13.3.1.5 |
| h3cDot11SaTrapDevRSSI Represents receive signal strength indicator (RSSI) of interfering
device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.13.3.1.6 |
| h3cDot11APTrapDevChls Represents channels that the interfering device affects. | scalar | OctetString | .1.3.6.1.4.1.2011.10.2.75.13.3.1.8 |
| h3cDot11APTrapDevDctTime Represents time at which the interference was detected. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.10.2.75.13.3.1.9 |