sDot1qVlanStaticUntaggedPorts

GBNDeviceSWAPI-MIB · .1.3.6.1.4.1.13464.1.2.2.2.8.4.3.1.4
Commands MIB view Table view

Object

column r/w PortList 
The set of ports which should transmit egress packets
for this VLAN as untagged.  The default value of this
object for the default VLAN (sDot1qVlanIndex = 1) is a string
of appropriate length including all ports.  There is no
specified default for other VLANs.  If a device agent cannot
support the set of ports being set then it will reject the
set operation with an error. An example might be if a
manager attempts to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option.

Context

MIB
GBNDeviceSWAPI-MIB
OID
.1.3.6.1.4.1.13464.1.2.2.2.8.4.3.1.4
Type
column
Access
readwrite
Status
current
Parent
sDot1qVlanStaticEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GBNDeviceSWAPI-MIB' -M '/opt/observium/mibs/gbn:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GBNDeviceSWAPI-MIB::sDot1qVlanStaticUntaggedPorts'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'GBNDeviceSWAPI-MIB' -M '/opt/observium/mibs/gbn:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GBNDeviceSWAPI-MIB::sDot1qVlanStaticUntaggedPorts.<sDot1qVlanIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'GBNDeviceSWAPI-MIB' -M '/opt/observium/mibs/gbn:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'GBNDeviceSWAPI-MIB::sDot1qVlanStaticUntaggedPorts'

Syntax

PortList
Source
PortList
Base type
OctetString
Type Description
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port.  Thus, each port
of the bridge is represented by a single bit within the
value of this object.  If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.

Values & Constraints

No enumerated values or constraints recorded.

Conformance

Member of
sMIBDot1QGroup