GBNDeviceSWAPI-MIB Table View

A table that contains generic information about
every port that is associated with this bridge.
Transparent, source-route, and srt ports are
included.

sDot1dBasePortEntry row .1.3.6.1.4.1.13464.1.2.2.2.4.1.4.1

A list of information for each port of the
bridge.

Indexes

sDot1dBasePort

Column	Syntax	OID
sDot1dBasePort The port number of the port for which this entry contains bridge management information.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.13464.1.2.2.2.4.1.4.1.1
sDot1dBaseIfIndex The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.2.2.4.1.4.1.2
sDot1dBasePortMtuExceededDiscards The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.4.1.4.1.5

A table that contains port-specific information
for the Spanning Tree Protocol.

sDot1dStpPortEntry row .1.3.6.1.4.1.13464.1.2.2.2.4.2.15.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

sDot1dStpPort

Column	Syntax	OID
sDot1dStpPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.13464.1.2.2.2.4.2.15.1.1
sDot1dStpPortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will …	Enumerationr/w Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken	.1.3.6.1.4.1.13464.1.2.2.2.4.2.15.1.2
sDot1dStpPortEnable The enabled/disabled status of the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.13464.1.2.2.2.4.2.15.1.3

A table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information.  This information is used
by the transparent bridging function in
determining how to propagate a received frame.

sDot1dTpFdbEntry row .1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1

Information about a specific unicast MAC address
for which the bridge has some forwarding and/or
filtering information.

Indexes

sDot1dTpFdbAddress

Column	Syntax	OID
sDot1dTpFdbAddress A unicast MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1.1
sDot1dTpFdbPort Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1.2
sDot1dTpFdbStatus The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the correspondi…	Enumeration Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1.3

A list of Ethernet statistics entries.

sEtherStatsEntry row .1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1

A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named etherStatsPkts.1

Indexes

sEtherStatsIndex

Column	Syntax	OID
sEtherStatsIndex The value of this object uniquely identifies this etherStats entry. Defined as a single port via the MIB-II ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.1
sEtherStatsDropEvents The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has b…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.3
sEtherStatsOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of ethernet …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.4
sEtherStatsPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.5
sEtherStatsBroadcastPkts The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.6
sEtherStatsMulticastPkts The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.7
sEtherStatsCRCAlignErrors The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral nu…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.8
sEtherStatsUndersizePkts The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.9
sEtherStatsOversizePkts The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.10
sEtherStatsFragments The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.11
sEtherStatsJabbers The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.12
sEtherStatsCollisions The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) o…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.13
sEtherStatsPkts64Octets The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.14
sEtherStatsPkts65to127Octets The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.15
sEtherStatsPkts128to255Octets The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.16
sEtherStatsPkts256to511Octets The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.17
sEtherStatsPkts512to1023Octets The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.18
sEtherStatsPkts1024to1518Octets The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.19
sEtherStatsRXMACControlFrames The total number of MAC control frames received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.20
sEtherStatsRXPauseMACCtrlFrames The total number of pause frames received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.21
sEtherStatsTXPauseMACCtrlFrames The total number of pause frames transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.22
sEtherStatsBcmIPMCBridgedPckts The total number of IPMC packets bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.23
sEtherStatsBcmIPMCRoutedPckts The total number of IPMC packets routed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.24
sEtherStatsBcmIPMCInDroppedPckts The total number of IPMC dropped packets for this port in the ingress.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.25
sEtherStatsBcmIPMCOutDroppedPckts The total number of IPMC dropped packets for this port in the egress.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.26
sEtherStatsIfInFrameRate The ingress packet rate of this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.27
sEtherStatsIfInOctetRate The ingress octet rate of this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.28
sEtherStatsIfOutFrameRate The egress packet rate of this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.29
sEtherStatsIfOutOctetRate The egress octet rate of this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.30

Table of descriptive and status information about
MAU(s) attached to an interface.

sIfMauEntry row .1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1

An entry in the table, containing information
about a single MAU.

Indexes

sIfMauIndex

Column	Syntax	OID
sIfMauIndex This variable uniquely identifies the MAU described by this entry from among other MAUs connected to the same interface (sIfMauIfIndex).	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.2
sIfMauType This object identifies the 10 or 100 Mb/s baseband or broadband MAU type. An initial set of MAU types are defined above. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU ty…	ObjectIdentifier	.1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.3
sIfMauMediaAvailable If the MAU is a link or fiber type (FOIRL, 10BASE-T, 10BASE-F) then this is equivalent to the link test fail state/low light function. For an AUI or a coax (including broadband) MAU this indicates whether or not loopbac…	Enumeration Enumerated Values: 1 other 2 unknown 3 available 4 notAvailable 5 remoteFault 6 invalidSignal 7 remoteJabber 8 remoteLinkLoss 9 remoteTest 10 offline 11 autoNegError	.1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.5
sIfMauJabberState The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent must always return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) is returned when the MAU's true state is unkn…	Enumeration Enumerated Values: 1 other 2 unknown 3 noJabber 4 jabbering	.1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.7
sIfMauDefaultType This object identifies the default administrative 10 or 100 Mb/s baseband MAU type, to be used in conjunction with the operational MAU type denoted by sIfMauType. The set of possible values for this objec…	ObjectIdentifierr/w	.1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.11

Configuration and status objects for the auto-
negotiation function of MAUs attached to
interfaces.

sIfMauAutoNegEntry row .1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1

An entry in the table, containing configuration
and status information for the auto-negotiation
function of a particular MAU.

Indexes

sIfMauIndex

Column	Syntax	OID
sIfMauAutoNegAdminStatus Setting this object to enabled(1) will cause the interface which has the auto-negotiation signaling ability to be enabled. If the value of this object is disabled(2) then the interface will act as it woul…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.1
sIfMauAutoNegRestart If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, a write to this object has no effect. Setting…	Enumerationr/w Enumerated Values: 1 restart 2 norestart	.1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.8
sIfMauAutoNegCapAdvertisedBits A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in ifMauAutoNegCapability cannot be enabled.	Bitsr/w Enumerated Values: 0 bOther 1 b10baseT 2 b10baseTFD 3 b100baseT4 4 b100baseTX 5 b100baseTXFD 6 b100baseT2 7 b100baseT2FD 8 bFdxPause 9 bFdxAPause 10 bFdxSPause 11 bFdxBPause 12 b1000baseX 13 b1000baseXFD 14 b1000baseT 15 b1000baseTFD	.1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.10
sIfMauAutoNegCapReceivedBits A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be attached to remote auto-negotiation entities wh…	Bits Enumerated Values: 0 bOther 1 b10baseT 2 b10baseTFD 3 b100baseT4 4 b100baseTX 5 b100baseTXFD 6 b100baseT2 7 b100baseT2FD 8 bFdxPause 9 bFdxAPause 10 bFdxSPause 11 bFdxBPause 12 b1000baseX 13 b1000baseXFD 14 b1000baseT 15 b1000baseTFD	.1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.11

A table that contains capabilities information about
every port that is associated with this bridge.

sDot1dPortCapabilitiesEntry row .1.3.6.1.4.1.13464.1.2.2.2.7.1.4.1

A set of capabilities information about this port
indexed by sDot1dBasePort.

Indexes

No indexes recorded

Column	Syntax	OID
sDot1dPortCapabilities Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis that are implemented by this device and are manageable through this MIB.	Bits Enumerated Values: 0 dot1qDot1qTagging 1 dot1qConfigurableAcceptableFrameTypes 2 dot1qIngressFiltering	.1.3.6.1.4.1.13464.1.2.2.2.7.1.4.1.1

A table that contains information about every port that
is associated with this transparent bridge.

sDot1dPortPriorityEntry row .1.3.6.1.4.1.13464.1.2.2.2.7.2.1.1

A list of Default User Priorities for each port of a
transparent bridge. This is indexed by sDot1dBasePort.

Indexes

No indexes recorded

Column	Syntax	OID
sDot1dPortDefaultUserPriority DURABLE: { 0:all } The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.2.2.2.7.2.1.1.1
sDot1dPortNumTrafficClasses The number of egress traffic classes supported on this port. This object may optionally be read-only.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.13464.1.2.2.2.7.2.1.1.2

A list of Regenerated User Priorities for each received
User Priority on each port of a bridge.  The Regenerated
User Priority value may be used to index the Traffic
Class Table for each input port.  This only has effect
on media that support native User Priority.  The default
values for Regenerated User Priorities are the same as
the User Priorities.

sDot1dUserPriorityRegenEntry row .1.3.6.1.4.1.13464.1.2.2.2.7.2.2.1

A mapping of incoming User Priority to a Regenerated
User Priority.

Indexes

sDot1dBasePort sDot1dUserPriority

Column	Syntax	OID
sDot1dUserPriority The User Priority for a frame received on this port.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.2.2.2.7.2.2.1.1
sDot1dRegenUserPriority The Regenerated User Priority the incoming User Priority is mapped to for this port.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.2.2.2.7.2.2.1.2

A table mapping evaluated User Priority to Traffic
Class, for forwarding by the bridge.  Traffic class is a
number in the range (0..(sDot1dPortNumTrafficClasses-1)).

sDot1dTrafficClassEntry row .1.3.6.1.4.1.13464.1.2.2.2.7.2.3.1

User Priority to Traffic Class mapping.

Indexes

sDot1dBasePort sDot1dTrafficClassPriority

Column	Syntax	OID
sDot1dTrafficClassPriority The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. …	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.2.2.2.7.2.3.1.1
sDot1dTrafficClass DURABLE: { 0:all } The Traffic Class the received frame is mapped to.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.2.2.2.7.2.3.1.2

A table mapping Regenerated User Priority to Outbound
Access Priority.  This is a fixed mapping for all port
types, with two options for 802.5 Token Ring.

sDot1dPortOutboundAccessPriorityEntry row .1.3.6.1.4.1.13464.1.2.2.2.7.2.4.1

Regenerated User Priority to Outbound Access Priority
mapping.

Indexes

sDot1dBasePort sDot1dRegenUserPriority

Column	Syntax	OID
sDot1dPortOutboundAccessPriority The Outbound Access Priority the received frame is mapped to.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.2.2.2.7.2.4.1.1

A table mapping evaluated DSCP to CoS.

oemDscpToCosMapEntry row .1.3.6.1.4.1.13464.1.2.2.2.7.2.6.1

DSCP to CoS mapping.

Indexes

oemDscpToCosMapDscp

Column	Syntax	OID
oemDscpToCosMapDscp the DSCP value used to map to CoS.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.13464.1.2.2.2.7.2.6.1.1
oemDscpToCosMapCos the map result CoS.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.13464.1.2.2.2.7.2.6.1.2

A table of GMRP control and status information about
every bridge port.  Augments the sDot1dBasePortTable.

sDot1dPortGmrpEntry row .1.3.6.1.4.1.13464.1.2.2.2.7.4.1.1

GMRP control and status information for a bridge port.

Indexes

No indexes recorded

Column	Syntax	OID
sDot1dPortGmrpStatus The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as sDot1dGmrpStatus is also enabled(1). A value of disabled(2) indicates tha…	EnabledStatusr/w Type Values: 1 enabled 2 disabled Description: A simple status value for the object.	.1.3.6.1.4.1.13464.1.2.2.2.7.4.1.1.1

A table that contains configuration and control
information for each Filtering Database currently
operating on this device.  Entries in this table appear
automatically when VLANs are assigned FDB IDs in the
dot1qVlanCurrentTable.

sDot1qFdbEntry row .1.3.6.1.4.1.13464.1.2.2.2.8.2.1.1

Information about a specific Filtering Database.

Indexes

sDot1qFdbId

Column	Syntax	OID
sDot1qFdbId The identity of this Filtering Database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.8.2.1.1.1
sDot1qFdbDynamicCount The current number of dynamic entries in this Filtering Database.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.8.2.1.1.2

A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information.  This information is used by the
transparent bridging function in determining how to
propagate a received frame.

sDot1qTpFdbEntry row .1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1

Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information.

Indexes

sDot1qFdbId sDot1qTpFdbAddress

Column	Syntax	OID
sDot1qTpFdbAddress A unicast MAC address for which the device has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1.1
sDot1qTpFdbPort Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the port …	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1.2
sDot1qTpFdbStatus The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of dot1qTpFdbPort, …	Enumeration Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1.3

A table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
multicast group-addressed frames for which there is no
more specific forwarding information applies.  This is
configured statically by management and determined
dynamically by GMRP.  An entry appears in this table for
all VLANs that are currently instantiated.

sDot1qForwardUnregisteredEntry row .1.3.6.1.4.1.13464.1.2.2.2.8.2.5.1

Forwarding information for a VLAN, specifying the set
of ports to which all multicasts for which there is no
more specific forwarding information shall be forwarded.
This is configured statically by management or
dynami…

Indexes

sDot1qVlanIndex

Column	Syntax	OID
sDot1qForwardUnregisteredPorts The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined …	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.13464.1.2.2.2.8.2.5.1.1

A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded.  A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address.  Entries are valid for unicast
addresses only.

sDot1qStaticUnicastEntry row .1.3.6.1.4.1.13464.1.2.2.2.8.3.1.1

Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allow…

Indexes

sDot1qFdbId sDot1qStaticUnicastAddress sDot1qStaticUnicastReceivePort

Column	Syntax	OID
sDot1qStaticUnicastAddress The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13464.1.2.2.2.8.3.1.1.1
sDot1qStaticUnicastReceivePort Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the d…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.13464.1.2.2.2.8.3.1.1.2
sDot1qStaticUnicastAllowedToGoTo The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of ports a specific unicast address may be dynamically learnt on. …	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.13464.1.2.2.2.8.3.1.1.3

A table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded.  A value of zero in this table as the port
number from which frames with a specific destination
address are received, is used to specify all ports for
which there is no specific entry in this table for that
particular destination address.  Entries are valid for
Multicast and Broadcast addresses only.

sDot1qStaticMulticastEntry row .1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1

Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port
for this VLAN and containing this Multicast or Broadcast
des…

Indexes

sDot1qVlanIndex sDot1qStaticMulticastAddress sDot1qStaticMulticastReceivePort

Column	Syntax	OID
sDot1qStaticMulticastAddress The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.1
sDot1qStaticMulticastReceivePort Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the d…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.2
sDot1qStaticMulticastStaticEgressPorts The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information e.g. from GMRP. A port may not be a…	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.3
sDot1qStaticMulticastStatus This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 permanent 4 deleteOnReset 5 deleteOnTimeout	.1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.5

A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received.

sDot1qVlanCurrentEntry row .1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1

Information for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received.

Indexes

sDot1qVlanTimeMark sDot1qVlanIndex

Column	Syntax	OID
sDot1qVlanTimeMark A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.	TimeFilter Based On: SNMPv2-SMITimeTicks Description: To be used for the index to a table. Allows an application to download only those rows changed since a particular time. A row is considered changed if the value of any object in the row changes or if the row is created…	.1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1.1
sDot1qVlanIndex The VLAN-ID or other identifier refering to this VLAN.	VlanIndex Description: A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see Vlan…	.1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1.2
sDot1qVlanFdbId The Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the sDot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1.3
sDot1qVlanCurrentEgressPorts The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.	PortList Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1.4
sDot1qVlanCurrentUntaggedPorts The set of ports which are transmitting traffic for this VLAN as untagged frames.	PortList Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1.5

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.

sDot1qVlanStaticEntry row .1.3.6.1.4.1.13464.1.2.2.2.8.4.3.1

Static information for a VLAN configured into the
device by (local or network) management.

Indexes

sDot1qVlanIndex

Column	Syntax	OID
sDot1qVlanStaticEgressPorts The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVR…	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.13464.1.2.2.2.8.4.3.1.2
sDot1qVlanStaticUntaggedPorts The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (sDot1qVlanIndex = 1) is a string of appropriate length including all ports. There…	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.13464.1.2.2.2.8.4.3.1.4
sDot1qVlanStaticRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.2.2.2.8.4.3.1.5

A table containing per port control and status
information for VLAN configuration in the device.

sDot1qPortVlanEntry row .1.3.6.1.4.1.13464.1.2.2.2.8.4.5.1

Information controlling VLAN configuration for a port
on the device. This is indexed by sDot1dBasePort.

Indexes

No indexes recorded

Column	Syntax	OID
sDot1qPvid DURABLE: { 1:all } The PVID, the VLAN ID assigned to untagged frames or Prority-Tagged frames received on this port.	VlanIndexr/w Description: A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see Vlan…	.1.3.6.1.4.1.13464.1.2.2.2.8.4.5.1.1
sDot1qPortAcceptableFrameTypes DURABLE: { 1:all } When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Prority-Tagged frames received on thi…	Enumerationr/w Enumerated Values: 1 admitAll 2 admitOnlyVlanTagged	.1.3.6.1.4.1.13464.1.2.2.2.8.4.5.1.2
sDot1qPortIngressFiltering DURABLE: { 2:all } When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This c…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13464.1.2.2.2.8.4.5.1.3
sDot1qPortGvrpStatus The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still ena…	EnabledStatusr/w Type Values: 1 enabled 2 disabled Description: A simple status value for the object.	.1.3.6.1.4.1.13464.1.2.2.2.8.4.5.1.4

Statistics for a collection of ethernet-like
interfaces attached to a particular system.

sDot3StatsEntry row .1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1

Statistics for a particular interface to an
ethernet-like medium.

Indexes

sDot3StatsIndex

Column	Syntax	OID
sDot3StatsIndex An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.1
sDot3StatsAlignmentErrors A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented w…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.2
sDot3StatsFCSErrors A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.3
sDot3StatsSingleCollisionFrames A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.4
sDot3StatsMultipleCollisionFrames A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.5
sDot3StatsSQETestErrors A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is desc…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.6
sDot3StatsDeferredTransmissions A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames invo…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.7
sDot3StatsLateCollisions The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.8
sDot3StatsExcessiveCollisions A count of frames for which transmission on a particular interface fails due to excessive collisions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.9
sDot3StatsInternalMacTransmitErrors A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding in…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.10
sDot3StatsCarrierSenseErrors The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is increm…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.11
sDot3StatsFrameTooLongs A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is return…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.13
sDot3StatsInternalMacReceiveErrors A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instan…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.16
sDot3StatsEtherChipSet This object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. Ethernet-like interfaces are typically built out of several different chips. The MIB implementor is presented with a …	ObjectIdentifier	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.17
sDot3StatsSymbolErrors For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in half-duplex mode at 1000 Mb/s, the number of ti…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.18
sDot3StatsDuplexStatus The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mode is accomplished through the MAU MIB. When…	Enumeration Enumerated Values: 1 unknown 2 halfDuplex 3 fullDuplex	.1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.19

A list of interface entries.  The number of
entries is given by the value of ifNumber.

sSwitchStatsEntry row .1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1

An interface entry containing objects at the
subnetwork layer and below for a particular
interface.

Indexes

sSwitchPortIndex

Column	Syntax	OID
sSwitchPortIndex A unique value, uses linear port number with holes.	Integer32 Constraints: range: 1-65536	.1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1.1
sSwitchStatsTXOctetsNoErr The number of octets transmitted from the interface. This number does not include octets in error.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1.2
sSwitchStatsTXPacketsNoErr The number of packets transmitted from the interface. This number does not include packets in error.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1.3
sSwitchStatsRXOctetsNoErr The number of octets received on the interface. This number does not include octets in error.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1.4
sSwitchStatsRXPacketsNoErr The number of packets received on the interface. This number does not include packets in error.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1.5