sDot1qStaticMulticastStaticEgressPorts

GBNDeviceSWAPI-MIB · .1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.3
Commands MIB view Table view

Object

column r/w PortList 
The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP.  A port may not
be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length.

Context

MIB
GBNDeviceSWAPI-MIB
OID
.1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.3
Type
column
Access
readwrite
Status
current
Parent
sDot1qStaticMulticastEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GBNDeviceSWAPI-MIB' -M '/opt/observium/mibs/gbn:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GBNDeviceSWAPI-MIB::sDot1qStaticMulticastStaticEgressPorts'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'GBNDeviceSWAPI-MIB' -M '/opt/observium/mibs/gbn:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GBNDeviceSWAPI-MIB::sDot1qStaticMulticastStaticEgressPorts.<sDot1qVlanIndex>.<sDot1qStaticMulticastAddress>.<sDot1qStaticMulticastReceivePort>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'GBNDeviceSWAPI-MIB' -M '/opt/observium/mibs/gbn:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'GBNDeviceSWAPI-MIB::sDot1qStaticMulticastStaticEgressPorts'

Syntax

PortList
Source
PortList
Base type
OctetString
Type Description
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port.  Thus, each port
of the bridge is represented by a single bit within the
value of this object.  If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.

Values & Constraints

No enumerated values or constraints recorded.

Conformance

Member of
sMIBDot1QGroup