configMdiMode
G6-PORT-MIB ·
.1.3.6.1.4.1.3181.10.6.1.81.1.1.11
Object
column
r/w
Enumeration
Enables Auto MDI/MDI-X mode to automatically adapt port pinout to cable type used. When set to forced, port pinout is fixed.
Context
- MIB
- G6-PORT-MIB
- OID
.1.3.6.1.4.1.3181.10.6.1.81.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- configEntry
- Table
- configTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | auto |
1 | forceMdiStd |
2 | forceMdix |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| configPortIndex Automatically generated | column | Integer32 | .1.3.6.1.4.1.3181.10.6.1.81.1.1.1 |
| configFlowcontrol When Auto-Negotiation is disabled sets port into flow control mode. When Auto-Negotiation is enabled, it determines the advertisement of flow control capability. Flow control is o… | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.81.1.1.10 |
| configEnergyEfficiency Enable Energy Efficient Ethernet mode is only available for copper ports in 1000Base-T mode. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.81.1.1.12 |
| configDualMediaMode Define media selection for dual media ports. This function is only available on ports with dual media Phy. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.81.1.1.13 |
| configAllowedOutgoingPorts This bitmask may be used to limit the outgoing traffic to certain ports. This feature is also known as port based vlan. Syntax: slot/port, slot/port or use hex value for quick set… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3181.10.6.1.81.1.1.14 |
| configAlias Alternative descriptive port name, user defineable. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.81.1.1.2 |
| configPortOperation Enables the port for operation. When disabled, port is shut down. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.81.1.1.3 |
| configRole Defines is a port is a regular local user port or a link to the network. This setting is references in various sanity checks throughout the system. When in doubt leave at default … | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.81.1.1.4 |
| configSpeed When Auto-Negotiation is disabled sets the ports data rate to the selected speed. When Auto-Negotiation is enabled it determines the highest data rate advertised on port. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.81.1.1.5 |
| configMtu MTU used only to have a place holder for SNMP ifTable | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.81.1.1.6 |
| configLoopProtection Loop protection detects ethernet loops that can occur when cables are plugged in a way that the data send out of a port come back to the switch on another port. This will result i… | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.81.1.1.7 |
| configAutoNegotiation Enables Auto-Negotiation mode. When Auto-Negotiation mode is enabled, the parameters speed, full_duplex and flow_control determine the advertised port abilites. When Auto-Negotiat… | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.81.1.1.8 |
| configFullDuplex When Auto-Negotiation is disabled sets port to full duplex operation (when disabled, port is in half duplex mode). When Auto-Negotiation is enabled, it determines the advertisemen… | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.81.1.1.9 |