G6-PORT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
35
configTable
table.1.3.6.1.4.1.3181.10.6.1.81.1
·
1 row entry
·
14 columns
This section defines the basic configuration parameter for each port.
Indexes
configPortIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
configPortIndex
Automatically generated
|
Integer32 Constraints: range: 0-24 |
.1.3.6.1.4.1.3181.10.6.1.81.1.1.1 |
||||||||
|
configAlias
Alternative descriptive port name, user defineable.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.81.1.1.2 |
||||||||
|
configPortOperation
Enables the port for operation. When disabled, port is shut down.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.3 |
||||||||
|
configRole
Defines is a port is a regular local user port or a link to the network. This setting is references in various sanity checks throughout the system. When in doubt leave at default setting.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.4 |
||||||||
|
configSpeed
When Auto-Negotiation is disabled sets the ports data rate to the selected speed. When Auto-Negotiation is enabled it determines the highest data rate advertised on port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.5 |
||||||||
|
configMtu
MTU used only to have a place holder for SNMP ifTable
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.6 |
||||||||
|
configLoopProtection
Loop protection detects ethernet loops that can occur when cables are plugged in a way that the data send out of a port come back to the switch on another port. This will result in a data loop of endless packets. Such a…
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.7 |
||||||||
|
configAutoNegotiation
Enables Auto-Negotiation mode. When Auto-Negotiation mode is enabled, the parameters speed, full_duplex and flow_control determine the advertised port abilites. When Auto-Negotiation is disabled, the parameters speed, f…
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.8 |
||||||||
|
configFullDuplex
When Auto-Negotiation is disabled sets port to full duplex operation (when disabled, port is in half duplex mode). When Auto-Negotiation is enabled, it determines the advertisement of full duplex capability.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.9 |
||||||||
|
configFlowcontrol
When Auto-Negotiation is disabled sets port into flow control mode. When Auto-Negotiation is enabled, it determines the advertisement of flow control capability. Flow control is only supported when port is in full duple…
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.10 |
||||||||
|
configMdiMode
Enables Auto MDI/MDI-X mode to automatically adapt port pinout to cable type used. When set to forced, port pinout is fixed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.11 |
||||||||
|
configEnergyEfficiency
Enable Energy Efficient Ethernet mode is only available for copper ports in 1000Base-T mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.12 |
||||||||
|
configDualMediaMode
Define media selection for dual media ports. This function is only available on ports with dual media Phy.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.1.1.13 |
||||||||
|
configAllowedOutgoingPorts
This bitmask may be used to limit the outgoing traffic to certain ports. This feature is also known as port based vlan. Syntax: slot/port, slot/port or use hex value for quick setup = 0x3f (ports 1-6)
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3181.10.6.1.81.1.1.14 |
monitorTable
table.1.3.6.1.4.1.3181.10.6.1.81.2
·
1 row entry
·
4 columns
Port monitoring is a test tool which permits reading data from on port on another port for trouble shooting purposes.
Indexes
monitorIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
monitorIndex
Automatically generated
|
Integer32 Constraints: range: 0-0 |
.1.3.6.1.4.1.3181.10.6.1.81.2.1.1 |
||||||||
|
monitorMode
Defines in which mode of port monitoring operation is used. Default is DISABLED for normal operation.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.2.1.2 |
||||||||
|
monitorSource
Source port(2) of which the traffic is to be monitored. CLI Syntax: 1/1 for first port. 1/1,1/3 for first and third port
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3181.10.6.1.81.2.1.3 |
||||||||
|
monitorDestination
Port on which the traffic monitored on the source port shall be copied to. Normally a network sniffer is connected to this port. Please observe that possibly the VLAN setting of the destination port must match the that …
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3181.10.6.1.81.2.1.4 |
statusTable
table.1.3.6.1.4.1.3181.10.6.1.81.102
·
1 row entry
·
17 columns
This status table indicates current port status and (negotiated) settings. It also displays if a port is logically blocked due to a certain protocol condition.
Indexes
statusPortIndex
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
statusPortIndex
Automatically generated
|
Integer32 Constraints: range: 0-31 |
.1.3.6.1.4.1.3181.10.6.1.81.102.1.1 |
||||||||||||||||||
|
statusLinkUp
False: Link is down, True: Link is up. For dual media ports this indicates the status of the active media.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.2 |
||||||||||||||||||
|
statusLastLinkChange
Time when the link_up status changed the last time. Value may appear illogical if the system time is not properly set.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.81.102.1.3 |
||||||||||||||||||
|
statusLinkState
Logical port status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.4 |
||||||||||||||||||
|
statusRxActivity
Indicates true when data activity on the receiver is detected.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.5 |
||||||||||||||||||
|
statusTxActivity
Indicates true when data activity on the transmitter is detected.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.6 |
||||||||||||||||||
|
statusMediaUsed
indicates which media is used for dual media ports
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.7 |
||||||||||||||||||
|
statusSpeedUsed
Actual (negotiated) port data rate.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.8 |
||||||||||||||||||
|
statusLoopedPort
Usually empty. When a port loop is detected through loop protection function then the looped port is indicated here.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3181.10.6.1.81.102.1.9 |
||||||||||||||||||
|
statusFullDuplexUsed
False: Half duplex, True: Full duplex.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.10 |
||||||||||||||||||
|
statusFlowcontrolUsed
False: No flow control, True: Use flow control.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.11 |
||||||||||||||||||
|
statusMdiUsed
False: MDI pinout, True: MDI-X pinout.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.12 |
||||||||||||||||||
|
statusEeeActive
When true Energy Efficent Ethernet is supported by both ends of the link and is active.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.13 |
||||||||||||||||||
|
statusBlockingAlgorithm
Flags indicate blocking request by which algorithm per port.
|
Bits Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.14 |
||||||||||||||||||
|
statusLearningAlgorithm
Flags indicate learning request by which algorithm per port.
|
Bits Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.15 |
||||||||||||||||||
|
statusForwardingAlgorithm
Flags indicate forwarding request by which algorithm per port.
|
Bits Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.16 |
||||||||||||||||||
|
statusUnauthorizedAlgorithm
Flags indicate use of unauthorized vlan request by which algorithm per port.
|
Bits Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.81.102.1.17 |