configCdpVersion
G6-LLDP-MIB ·
.1.3.6.1.4.1.3181.10.6.2.43.1.1.10
Object
column
r/w
Enumeration
Determines which version CDP messages are used.
Context
- MIB
- G6-LLDP-MIB
- OID
.1.3.6.1.4.1.3181.10.6.2.43.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- configEntry
- Table
- configTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | v1AndV2 |
1 | v1 |
2 | v2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| configIndex Automatically generated | column | Integer32 | .1.3.6.1.4.1.3181.10.6.2.43.1.1.1 |
| configVoiceVlanPrio Layer 2 priority used for voice vlan in voip application. | column | Integer32 | .1.3.6.1.4.1.3181.10.6.2.43.1.1.11 |
| configVoiceVlanSignalPrio Layer 2 priority used for voice vlan signaling in voip application. | column | Integer32 | .1.3.6.1.4.1.3181.10.6.2.43.1.1.12 |
| configVoiceDscp DiffServ codepoint (0-63) for voip application | column | Integer32 | .1.3.6.1.4.1.3181.10.6.2.43.1.1.13 |
| configSignalingDscp DiffServ codepoint (0-63) for voip signaling | column | Integer32 | .1.3.6.1.4.1.3181.10.6.2.43.1.1.14 |
| configTimeToLive The time to live value defines the time for which the lldp transmitted details are valid and can be displayed in the status. | column | Integer32 | .1.3.6.1.4.1.3181.10.6.2.43.1.1.15 |
| configTxDelay Transmission delay in seconds between successive LLDP frame transmissions initiated by changes in the LLDP local configuration. | column | Integer32 | .1.3.6.1.4.1.3181.10.6.2.43.1.1.16 |
| configMsgTxInterval The interval at which LLDP frames are transmitted on behalf of this LLDP agent. | column | Integer32 | .1.3.6.1.4.1.3181.10.6.2.43.1.1.17 |
| configForceLldpTransmission Force to send LLDP packets even when there is no LLDP peer detected. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.43.1.1.18 |
| configLldpResponsePreferred When enabled LLDP responses takes precende over CDP protocol responses. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.43.1.1.19 |
| configEnableLldp This generally enables the link layer discovery protocol (LLDP). | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.43.1.1.2 |
| configEnableCdp This enables Cisco discovery protocol. Check cdp_version parameter to select CDP version. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.43.1.1.3 |
| configLldpEnabledPorts This parameter permits port selective LLDP enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example = 0x7 defines ports 1… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3181.10.6.2.43.1.1.4 |
| configReceiveOnly This enables receive only mode. LLDP will not send any frames. It will only listen to its neighbours. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.43.1.1.5 |
| configForwardToLink This mode forwards all received LLDP packets to the uplink port. In combination with receive_only option enabled this unit keeps quiet and all LLDP handling should be taken care o… | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.43.1.1.6 |
| configAdvertizedMedClass Enables emission of LLDP-MED frames of a certain class. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.43.1.1.7 |
| configDisableMedInventory Disable LLDP-MED inventory TLV transmission. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.43.1.1.8 |
| configDisableVoiceVlanTlv Disable voice vlan indication TLV transmission. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.43.1.1.9 |