G6-LLDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
133

configTable

table
.1.3.6.1.4.1.3181.10.6.2.43.1 · 1 row entry · 19 columns
Open in standard view 
General settings for LLDP (link layer discovery protocol). This protocol is used to identify the directly attached neighbor devices. This is useful to build a network topolgy. It is also used to identify voip telephones and to set them up.
configEntry entry .1.3.6.1.4.1.3181.10.6.2.43.1.1
Indexes
configIndex
Column Syntax OID
configIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.1
configEnableLldp
This generally enables the link layer discovery protocol (LLDP).
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.2
configEnableCdp
This enables Cisco discovery protocol. Check cdp_version parameter to select CDP version.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.3
configLldpEnabledPorts
This parameter permits port selective LLDP enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example = 0x7 defines ports 1-3.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.4
configReceiveOnly
This enables receive only mode. LLDP will not send any frames. It will only listen to its neighbours.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.5
configForwardToLink
This mode forwards all received LLDP packets to the uplink port. In combination with receive_only option enabled this unit keeps quiet and all LLDP handling should be taken care off by the upstream device.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.6
configAdvertizedMedClass
Enables emission of LLDP-MED frames of a certain class.
Enumerationr/w
Enumerated Values:
0disableMed
1genericEndpoint
2mediaEndpoint
3communicationEndpoint
4networkDevice
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.7
configDisableMedInventory
Disable LLDP-MED inventory TLV transmission.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.8
configDisableVoiceVlanTlv
Disable voice vlan indication TLV transmission.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.9
configCdpVersion
Determines which version CDP messages are used.
Enumerationr/w
Enumerated Values:
0v1AndV2
1v1
2v2
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.10
configVoiceVlanPrio
Layer 2 priority used for voice vlan in voip application.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.11
configVoiceVlanSignalPrio
Layer 2 priority used for voice vlan signaling in voip application.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.12
configVoiceDscp
DiffServ codepoint (0-63) for voip application
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.13
configSignalingDscp
DiffServ codepoint (0-63) for voip signaling
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.14
configTimeToLive
The time to live value defines the time for which the lldp transmitted details are valid and can be displayed in the status.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.15
configTxDelay
Transmission delay in seconds between successive LLDP frame transmissions initiated by changes in the LLDP local configuration.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.16
configMsgTxInterval
The interval at which LLDP frames are transmitted on behalf of this LLDP agent.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.17
configForceLldpTransmission
Force to send LLDP packets even when there is no LLDP peer detected.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.18
configLldpResponsePreferred
When enabled LLDP responses takes precende over CDP protocol responses.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.43.1.1.19

localCoordinatesTable

table
.1.3.6.1.4.1.3181.10.6.2.43.2 · 1 row entry · 9 columns
Open in standard view 
Detailed GPS information about the pysical location of this device may be entered here.
localCoordinatesEntry entry .1.3.6.1.4.1.3181.10.6.2.43.2.1
Indexes
localCoordinatesIndex
Column Syntax OID
localCoordinatesIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.2.43.2.1.1
localCoordinatesLatitude
A value in degrees such as: 50,123
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.2.1.2
localCoordinatesLatResolution
A value in bits. Higher value is more accurate.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.2.1.3
localCoordinatesLongitude
A value in degrees such as: 50,123
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.2.1.4
localCoordinatesLongResolution
A value in bits. Higher value is more accurate.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.2.1.5
localCoordinatesAltitude
A value in meters.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.2.1.6
localCoordinatesAltResolution
A value in bits. Higher value is more accurate.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.2.1.7
localCoordinatesAltType
Defines in which way the altitude is interpreted.
Enumerationr/w
Enumerated Values:
0meter
1floor
 .1.3.6.1.4.1.3181.10.6.2.43.2.1.8
localCoordinatesDatum
Name of the map the given coordinates are based upon.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.2.1.9

localCivicLocationTable

table
.1.3.6.1.4.1.3181.10.6.2.43.3 · 1 row entry · 25 columns
Open in standard view 
Detailed address information about the physical location of this device may be entered here. These data are forwarded using the LLDP-MED protocol.
localCivicLocationEntry entry .1.3.6.1.4.1.3181.10.6.2.43.3.1
Indexes
localCivicLocationIndex
Column Syntax OID
localCivicLocationIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.1
localCivicLocationCountryCode
Two-letter ISO 3166 country code in capital ASCII letters. Use DE for Germany, etc.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.2
localCivicLocationLanguage
ISO 639 language code used for presenting the address information.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.3
localCivicLocationNationalSubdivision
National subdivision: state, canton, region, province, or prefecture. Example: Hessen
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.4
localCivicLocationCounty
County / parish / district. Example: Landkreis Darmstadt
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.5
localCivicLocationTown
City / township. Example: Frankfurt
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.6
localCivicLocationDistrict
City district / division / borough / ward.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.7
localCivicLocationBlock
Neighborhood / block.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.8
localCivicLocationStreet
Name of the street without house number.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.9
localCivicLocationLeadingStreetDirection
Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.10
localCivicLocationTrailingStreetSuffix
Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.11
localCivicLocationStreetSuffix
Street suffix such as place or avenue.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.12
localCivicLocationHouseNumber
House number without a possible suffix.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.13
localCivicLocationHouseNumberSuffix
A modifier to the house number. It does not include parts of the house number. Example: a
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.14
localCivicLocationLandmark
Landmark or vanity address for easier reference. Example: Airport Frankfurt
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.15
localCivicLocationAdditionalInfo
Additional location information without specified format.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.16
localCivicLocationName
Identifies the person or organization associated with the address. Example: Sunshine Airline Office
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.17
localCivicLocationZipCode
Postal zip code for the address.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.18
localCivicLocationBuilding
The name of the building if this exists. Example: Terminal Building East
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.19
localCivicLocationUnit
Unit / appartment / suite.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.20
localCivicLocationFloor
Floor value. Example: 1 for first floor
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.21
localCivicLocationRoom
Room number or name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.22
localCivicLocationPlaceType
Place type. Example: Office
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.23
localCivicLocationScript
The script (from ISO 15924 [14]) used to encode the address information. Default: Latn
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.24
localCivicLocationElinNumber
Emergency Call Services (ECS) Emergency Location Identification Number (ELIN).
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.3.1.25

receivedOverviewTable

table
.1.3.6.1.4.1.3181.10.6.2.43.100 · 1 row entry · 14 columns
Open in standard view
receivedOverviewEntry entry .1.3.6.1.4.1.3181.10.6.2.43.100.1
Indexes
receivedOverviewPortIndex
Column Syntax OID
receivedOverviewPortIndex
Automatically generated
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.1
receivedOverviewSysName
System name.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.2
receivedOverviewSysDesc
System description.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.3
receivedOverviewChassisIdSubtype
Type of chassis id.
Enumeration
Enumerated Values:
0unknown
1chassisComponent
2interfaceAlias
3portComponent
4macAddress
5networkAddress
6interfaceName
7local
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.4
receivedOverviewChassisId
Chassis id of received frame.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.5
receivedOverviewMgmtIp
Management IP address.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.6
receivedOverviewMgmtOid
Management start OID for SNMP access.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.7
receivedOverviewCapabilities
LLDP capabilities supported.
Bits
Enumerated Values:
0other
1repeater
2bridge
3wlan
4router
5telephone
6docsis
7station
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.8
receivedOverviewCapabilitiesEnabled
LLDP capabilities enabled.
Bits
Enumerated Values:
0other
1repeater
2bridge
3wlan
4router
5telephone
6docsis
7station
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.9
receivedOverviewMedCapabilities
LLDP_MED capabilities.
Bits
Enumerated Values:
0capability
1policy
2location
3mdiPse
4mdiPd
5inventory
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.10
receivedOverviewPortIdSubtype
Type of port id.
Enumeration
Enumerated Values:
0unknown
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.11
receivedOverviewPortIdentification
Port id.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.12
receivedOverviewPortDescription
Port description.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.13
receivedOverviewPortVlan
Port vlan identifier. Related to port_default_vlan_id.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.43.100.1.14

receivedCoordinatesTable

table
.1.3.6.1.4.1.3181.10.6.2.43.101 · 1 row entry · 9 columns
Open in standard view 
Detailed GPS information about the pysical location of the attached device for each port are visible here if provided through the LLDP-MED protocol.
receivedCoordinatesEntry entry .1.3.6.1.4.1.3181.10.6.2.43.101.1
Indexes
receivedCoordinatesPortIndex
Column Syntax OID
receivedCoordinatesPortIndex
Automatically generated
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.3181.10.6.2.43.101.1.1
receivedCoordinatesLatitude
A value in degrees such as: 50,123
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.101.1.2
receivedCoordinatesLatResolution
A value in bits. Higher value is more accurate.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.101.1.3
receivedCoordinatesLongitude
A value in degrees such as: 50,123
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.101.1.4
receivedCoordinatesLongResolution
A value in bits. Higher value is more accurate.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.101.1.5
receivedCoordinatesAltitude
A value in meters or the floor level depending on definition.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.101.1.6
receivedCoordinatesAltResolution
A value in bits. Higher value is more accurate.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.101.1.7
receivedCoordinatesAltUnit
Defines in which way the altitude is interpreted.
Enumeration
Enumerated Values:
0meter
1floor
 .1.3.6.1.4.1.3181.10.6.2.43.101.1.8
receivedCoordinatesDatum
Name of the map the given coordinates are based upon.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.101.1.9

receivedCivicLocationsTable

table
.1.3.6.1.4.1.3181.10.6.2.43.102 · 1 row entry · 25 columns
Open in standard view 
Detailed address information about the physical location of the attached device for each port are visible here if provided through the LLDP-MED protocol.
receivedCivicLocationsEntry entry .1.3.6.1.4.1.3181.10.6.2.43.102.1
Indexes
receivedCivicLocationsPortIndex
Column Syntax OID
receivedCivicLocationsPortIndex
Automatically generated
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.1
receivedCivicLocationsCountryCode
Two-letter ISO 3166 country code in capital ASCII letters. Use DE for Germany, etc.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.2
receivedCivicLocationsLanguage
ISO 639 language code used for presenting the address information.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.3
receivedCivicLocationsNationalSubdivision
National subdivision: state, canton, region, province, or prefecture. Example: Hessen.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.4
receivedCivicLocationsCounty
County / parish / district. Example: Landkreis Darmstadt
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.5
receivedCivicLocationsTown
City / township. Example: Frankfurt
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.6
receivedCivicLocationsDistrict
City district / division / borough / ward.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.7
receivedCivicLocationsBlock
Neighborhood / block.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.8
receivedCivicLocationsStreet
Name of the street without house number.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.9
receivedCivicLocationsLeadingStreetDirection
Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.10
receivedCivicLocationsTrailingStreetSuffix
Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.11
receivedCivicLocationsStreetSuffix
Street suffix such as place or avenue.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.12
receivedCivicLocationsHouseNumber
House number without a possible suffix.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.13
receivedCivicLocationsHouseNumberSuffix
A modifier to the house number. It does not include parts of the house number. Example: a
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.14
receivedCivicLocationsLandmark
Landmark or vanity address for easier reference. Example: Airport Frankfurt
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.15
receivedCivicLocationsAdditionalInfo
Additional location information without specified format.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.16
receivedCivicLocationsName
Identifies the person or organization associated with the address. Example: Sunshine Airline Office
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.17
receivedCivicLocationsZipCode
Postal zip code for the address.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.18
receivedCivicLocationsBuilding
The name of the building if this exists. Example: Terminal Building East
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.19
receivedCivicLocationsUnit
Unit / appartment / suite.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.20
receivedCivicLocationsFloor
Floor value. Example: 1 for first floor.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.21
receivedCivicLocationsRoom
Room number or name.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.22
receivedCivicLocationsPlaceType
Place type. Example: Office.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.23
receivedCivicLocationsScript
The script (from ISO 15924 [14]) used to encode the address information. Default: Latn
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.24
receivedCivicLocationsElinNumber
Emergency Call Services (ECS) Emergency Location Identification Number (ELIN).
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.102.1.25

receivedPoliciesTable

table
.1.3.6.1.4.1.3181.10.6.2.43.103 · 1 row entry · 7 columns
Open in standard view 
Detailed information about the attached applications.
receivedPoliciesEntry entry .1.3.6.1.4.1.3181.10.6.2.43.103.1
Indexes
receivedPoliciesPortIndex
Column Syntax OID
receivedPoliciesPortIndex
Automatically generated
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.3181.10.6.2.43.103.1.1
receivedPoliciesApplicationType
Valid application types.
Enumeration
Enumerated Values:
0unknown
1voice
2voiceSignaling
3guestVoice
4guestVoiceSignaling
5softphoneVoice
6videoConferencing
7streamingVideo
8videoSignaling
 .1.3.6.1.4.1.3181.10.6.2.43.103.1.2
receivedPoliciesPolicyDefined
False indicates policy is unknown. True indicates policy is defined.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.3181.10.6.2.43.103.1.3
receivedPoliciesTaggedVlan
When set VLAN tagging is used.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.3181.10.6.2.43.103.1.4
receivedPoliciesVlanId
0 - only the priority level is significant. / IEEE 802.1q VLAN ID (VID) value. Related to voice vlan.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.43.103.1.5
receivedPoliciesLayer2Priority
IEEE 802.1d / IEEE 802.1p Layer 2 Priority.
Enumeration
Enumerated Values:
0unknown
1background
2spare
3bestEffort
4excellentEffort
5controlledLoad
6video
7voice
8networkControl
 .1.3.6.1.4.1.3181.10.6.2.43.103.1.6
receivedPoliciesDscp
DiffServ/Differentiated Services Code Point (DSCP) value as defined in IETF RFC 2474 for the specified application type.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.103.1.7

receivedInventoryInfosTable

table
.1.3.6.1.4.1.3181.10.6.2.43.104 · 1 row entry · 8 columns
Open in standard view 
This table lists general inventory data of the attached equipment.
receivedInventoryInfosEntry entry .1.3.6.1.4.1.3181.10.6.2.43.104.1
Indexes
receivedInventoryInfosPortIndex
Column Syntax OID
receivedInventoryInfosPortIndex
Automatically generated
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.3181.10.6.2.43.104.1.1
receivedInventoryInfosHardwareRevision
Hardware version
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.104.1.2
receivedInventoryInfosFirmwareRevision
Firmware version
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.104.1.3
receivedInventoryInfosSoftwareRevision
Software version
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.104.1.4
receivedInventoryInfosSerialNumber
Serial number
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.104.1.5
receivedInventoryInfosManufacturer
Manufacturer name
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.104.1.6
receivedInventoryInfosModelName
Vendor-specific model name
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.104.1.7
receivedInventoryInfosAssetId
Vendor-specific asset tracking identifier
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.43.104.1.8

receivedPoeInfosTable

table
.1.3.6.1.4.1.3181.10.6.2.43.105 · 1 row entry · 5 columns
Open in standard view 
Detailed PoE information about the attached applications.
receivedPoeInfosEntry entry .1.3.6.1.4.1.3181.10.6.2.43.105.1
Indexes
receivedPoeInfosPortIndex
Column Syntax OID
receivedPoeInfosPortIndex
Automatically generated
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.3181.10.6.2.43.105.1.1
receivedPoeInfosType
Type of PoE equipment.
Enumeration
Enumerated Values:
0unknown
1pse
2pd
3noPoe
 .1.3.6.1.4.1.3181.10.6.2.43.105.1.2
receivedPoeInfosSource
Describes the power source.
Enumeration
Enumerated Values:
0unknown
1pdPsePrimary
2pdLocalBackup
3pdPseLocal
 .1.3.6.1.4.1.3181.10.6.2.43.105.1.3
receivedPoeInfosPriority
Indicates priority of this device.
Enumeration
Enumerated Values:
0unknown
1critical
2high
3low
 .1.3.6.1.4.1.3181.10.6.2.43.105.1.4
receivedPoeInfosValue
Indicates the power available from the PSE via this port expressed in units of 0.1 watts on the remote device.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.43.105.1.5

receivedPoeControlTable

table
.1.3.6.1.4.1.3181.10.6.2.43.106 · 1 row entry · 12 columns
Open in standard view
receivedPoeControlEntry entry .1.3.6.1.4.1.3181.10.6.2.43.106.1
Indexes
receivedPoeControlPortIndex
Column Syntax OID
receivedPoeControlPortIndex
Automatically generated
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.1
receivedPoeControlType
Indicates device type.
Enumeration
Enumerated Values:
0unknown
1pse
2pd
3noPoe
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.2
receivedPoeControlPoePowerSupported
Indicates if PoE is supported by the interface.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.3
receivedPoeControlPoePowerEnabled
Indicates if PoE is enabled for this interface.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.4
receivedPoeControlPairControl
Indicates if the pair selection can be controlled on the given port
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.5
receivedPoeControlPowerPairs
Indicates which pins of the plug are used for power.
Enumeration
Enumerated Values:
1signal
2spare
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.6
receivedPoeControlPowerClass
Required PoE class.
Enumeration
Enumerated Values:
0noClass
1class0
2class1
3class2
4class3
5class4
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.7
receivedPoeControlDeviceType
Type of PoE equipment.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.8
receivedPoeControlSource
Indicates the power source.
Enumeration
Enumerated Values:
0unknown
1pdPsePrimary
2pdLocalBackup
3pdPseLocal
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.9
receivedPoeControlPriority
Priority of the attached port.
Enumeration
Enumerated Values:
0unknown
1critical
2high
3low
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.10
receivedPoeControlPdRequestedPower
PD requested power value
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.11
receivedPoeControlPseAllocatedPower
PSE allocated power value
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.43.106.1.12