ioSignalStatusTable
G6-HARDWARE-MIB ·
.1.3.6.1.4.1.3181.10.6.1.31.115
Object
table
This section is only used for devices which offer external signal inputs and outputs.
Context
- MIB
- G6-HARDWARE-MIB
- OID
.1.3.6.1.4.1.3181.10.6.1.31.115- Type
- table
- Status
- current
- Parent
- hardware
- Siblings
- 23
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hardwareLedTest Runs a leds test whereby all LED light up in all possible colors for checking their function. The tests terminates within a few seconds. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.31.1 |
| hardwarePowerSupply1Status Displays state of primary supply or only supply for single supply systems. | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.31.100 |
| hardwarePowerSupply2Status Displays state of secondary supply if available. | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.31.101 |
| hardwareRunningOnPoe When set the unit currently operates on the PD input via PoE. | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.31.102 |
| hardwareFanStatus Displays state of cooling fan. Indicates UNUSED in fanless devices. | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.31.103 |
| hardwareSdCardStatus Current status of SD-card. | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.31.104 |
| hardwareNumOfPorts Total number of Ethernet ports this hardware offers. | scalar | Integer32 | .1.3.6.1.4.1.3181.10.6.1.31.105 |
| hardwareMaskOfExistingPorts Set bit for each port that physically exisiting and could be in use. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3181.10.6.1.31.106 |
| hardwareMaskOfSfpPorts Marks which ports support SFPs. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3181.10.6.1.31.107 |
| hardwareMaskOfPoePorts Marks which ports support PoE output. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3181.10.6.1.31.108 |
| moduleInfoTable This section indicates which modules are inserted in the optional extension slots. | table | - | .1.3.6.1.4.1.3181.10.6.1.31.109 |
| slotInfoTable This section indicates which modules are inserted in the optional extension slots. | table | - | .1.3.6.1.4.1.3181.10.6.1.31.110 |
| portInfoTable Used to map physical to logical port ids. | table | - | .1.3.6.1.4.1.3181.10.6.1.31.111 |
| portLedsTable This section indicates the state of all port related LEDs. | table | - | .1.3.6.1.4.1.3181.10.6.1.31.112 |
| deviceLedsTable This section indicates the state of all LEDs which are not port related. Please note: Not every unit offers all LEDs. | table | - | .1.3.6.1.4.1.3181.10.6.1.31.113 |
| cableTestStatusTable This table display the result of the last cable test. Values are only available for copper ports while a link is down and if the cable test function is enabled. | table | - | .1.3.6.1.4.1.3181.10.6.1.31.114 |
| tcamStatusTable The TCAM is a programmable wire speed packet filter. The filter is controlled by the system automatically. This table indicates which filters have been set. | table | - | .1.3.6.1.4.1.3181.10.6.1.31.116 |
| hardwareLedMode The LED display can be configured to be less intrusive. | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.31.2 |
| hardwarePowerSupply1Monitored When disabled a missing power supply 1 will not turn the associated led red on failure. Do this when single power supply 2 operation is used or when the device is powered soley by… | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.31.3 |
| hardwarePowerSupply2Monitored When disabled a missing power supply 2 will not turn the associated led red on failure. Do this when single power supply 1 operation is used or when the device is powered soley by… | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.31.4 |
| hardwareFactoryResetButton When disabled the factory button will trigger the factory reset function when pressed for a long time. The IP discover function upon a short button click is not affected. | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.31.5 |
| cableTestConfigTable The cable tester allows for detection of copper cable faults and can even detect where the fault is located. | table | - | .1.3.6.1.4.1.3181.10.6.1.31.6 |
| ioSignalConfigTable | table | - | .1.3.6.1.4.1.3181.10.6.1.31.7 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ioSignalStatusEntry | row | - | .1.3.6.1.4.1.3181.10.6.1.31.115.1 |