fsPimInterfaceMode
FS-PIM-MIB ·
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.4
Object
column
r/w
Enumeration
The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.
Context
- MIB
- FS-PIM-MIB
- OID
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsPimInterfaceEntry
- Table
- fsPimInterfaceTable
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | dense |
2 | sparse |
3 | sparseDense |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsPimInterfaceIfIndex The ifIndex value of this PIM interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.1 |
| fsPimInterfaceHelloHoldtime The value set in the Holdtime field of Hello messages
transmitted on this interface. This should be 3.5
times the value of pimInterfaceHelloInterval. | column | seconds Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.10 |
| fsPimInterfaceLanPruneDelay Turns the LAN Prune Delay Option off and on on this
interface. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.11 |
| fsPimInterfacePropagationDelay The value inserted into the LAN Prune Delay field of a
LAN Prune Delay option on this interface. | column | milliseconds Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.12 |
| fsPimInterfaceOverrideInterval The value inserted into the Override Interval field of
a LAN Prune Delay option on this interface. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.13 |
| fsPimInterfaceGenerationID Turns the Generation ID Option off and on on this
interface. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.14 |
| fsPimInterfaceJoinPruneHoldtime The value inserted into the Holdtime field of a Join/
Prune message sent on this interface. The value should
be 3.5 times pimInterfaceJoinPruneInterval. | column | seconds Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.15 |
| fsPimInterfaceGraftRetryInterval The interval a PIM router waits for a Graft Ack before
resending a Graft on this interface. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.16 |
| fsPimInterfaceMaxGraftRetries The maximum number of times this router will resend a
Graft on this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.17 |
| fsPimInterfaceSRTTLThreshold The Time To Live in a PIM-DM Refresh message at
which it is not forwarded on this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.18 |
| fsPimInterfaceLanDelayEnabled Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.19 |
| fsPimInterfaceAddress The IP address of the PIM interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.2 |
| fsPimInterfaceSRCapable Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.20 |
| fsPimInterfaceDRPriority The Designater Router Priority inserted into the DR
priority option on this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.21 |
| fsPimInterfaceNbrCounter The number of interface's neighbour. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.22 |
| fsPimInterfaceBsrBorderEnabled Enabled means Define a PIM bootstrap message boundary
for the PIM domain,use disabled to remove the PIM border. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.23 |
| fsPimInterfaceCountIn Number of packets into the interface since the
router has been up. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.24 |
| fsPimInterfaceCountOut Number of packets out of the interface
since the router has been up. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.25 |
| fsPimInterfaceEnabled use the ip pim command in interface configuration mode.
To disable PIM on the interface, use the no form of this
command. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.26 |
| fsPimNeighborFilterAcl The name of the neighbor filter address list,which limits
the scope of the neighbor,The default value means all
neighbors will be allowed. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.27 |
| fsPimDrSupportAddressBound The name of the DR support address list,which limits the scope of
the souce address ,this will be only used when the interface is DR,
The default value means all souce address w… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.28 |
| fsPimInterfaceNetMask The network mask for the IP address of the PIM interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.3 |
| fsPimInterfaceDR The Designated Router on this PIM interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.5 |
| fsPimInterfaceHelloInterval The frequency at which PIM Hello messages are transmitted
on this interface. | column | seconds Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.6 |
| fsPimInterfaceJoinPruneInterval The frequency at which PIM Join/Prune messages are
transmitted on this PIM interface. The default value of
this object is the pimJoinPruneInterval. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.7 |
| fsPimInterfaceCBSRPreference The preference value for the local interface as a candidate
bootstrap router. The value of -1 is used to indicate that
the local interface is not a candidate BSR interface. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.8 |
| fsPimInterfaceTrigHelloInterval The maximum time before a triggered PIM Hello message
is transmitted on this interface. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.9 |