FS-PIM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
79

fsPimInterfaceTable

table
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2 · 1 row entry · 28 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsPimInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-PIM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-PIM-MIB::fsPimInterfaceTable' 
The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table.
fsPimInterfaceEntry row .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1
An entry (conceptual row) in the fsPimInterfaceTable.
Indexes
Column Syntax OID
fsPimInterfaceIfIndex
The ifIndex value of this PIM interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.1
fsPimInterfaceAddress
The IP address of the PIM interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.2
fsPimInterfaceNetMask
The network mask for the IP address of the PIM interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.3
fsPimInterfaceMode
The configured mode of this PIM interface. A value of
sparseDense is only valid for PIMv1.
Enumerationr/w
Enumerated Values:
1dense
2sparse
3sparseDense
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.4
fsPimInterfaceDR
The Designated Router on this PIM interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.5
fsPimInterfaceHelloInterval
The frequency at which PIM Hello messages are transmitted
on this interface.
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.6
fsPimInterfaceJoinPruneInterval
The frequency at which PIM Join/Prune messages are
transmitted on this PIM interface. The default value of
this object is the pimJoinPruneInterval.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.7
fsPimInterfaceCBSRPreference
The preference value for the local interface as a candidate
bootstrap router. The value of -1 is used to indicate that
the local interface is not a candidate BSR interface.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.8
fsPimInterfaceTrigHelloInterval
The maximum time before a triggered PIM Hello message
is transmitted on this interface.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.9
fsPimInterfaceHelloHoldtime
The value set in the Holdtime field of Hello messages
transmitted on this interface. This should be 3.5
times the value of pimInterfaceHelloInterval.
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.10
fsPimInterfaceLanPruneDelay
Turns the LAN Prune Delay Option off and on on this
interface.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.11
fsPimInterfacePropagationDelay
The value inserted into the LAN Prune Delay field of a
LAN Prune Delay option on this interface.
millisecondsInteger32r/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.12
fsPimInterfaceOverrideInterval
The value inserted into the Override Interval field of
a LAN Prune Delay option on this interface.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.13
fsPimInterfaceGenerationID
Turns the Generation ID Option off and on on this
interface.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.14
fsPimInterfaceJoinPruneHoldtime
The value inserted into the Holdtime field of a Join/
Prune message sent on this interface. The value should
be 3.5 times pimInterfaceJoinPruneInterval.
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.15
fsPimInterfaceGraftRetryInterval
The interval a PIM router waits for a Graft Ack before
resending a Graft on this interface.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.16
fsPimInterfaceMaxGraftRetries
The maximum number of times this router will resend a
Graft on this interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.17
fsPimInterfaceSRTTLThreshold
The Time To Live in a PIM-DM Refresh message at
which it is not forwarded on this interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.18
fsPimInterfaceLanDelayEnabled
Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.19
fsPimInterfaceSRCapable
Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.20
fsPimInterfaceDRPriority
The Designater Router Priority inserted into the DR
priority option on this interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.21
fsPimInterfaceNbrCounter
The number of interface's neighbour.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.22
fsPimInterfaceBsrBorderEnabled
Enabled means Define a PIM bootstrap message boundary
for the PIM domain,use disabled to remove the PIM border.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.23
fsPimInterfaceCountIn
Number of packets into the interface since the
router has been up.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.24
fsPimInterfaceCountOut
Number of packets out of the interface
since the router has been up.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.25
fsPimInterfaceEnabled
use the ip pim command in interface configuration mode.
To disable PIM on the interface, use the no form of this
command.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.26
fsPimNeighborFilterAcl
The name of the neighbor filter address list,which limits
the scope of the neighbor,The default value means all
neighbors will be allowed.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.27
fsPimDrSupportAddressBound
The name of the DR support address list,which limits the scope of
the souce address ,this will be only used when the interface is DR,
The default value means all souce address will be allowed.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.28

fsPimNeighborTable

table
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3 · 1 row entry · 10 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsPimNeighborTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-PIM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-PIM-MIB::fsPimNeighborTable' 
The (conceptual) table listing the router's PIM neighbors.
fsPimNeighborEntry row .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1
An entry (conceptual row) in the fsPimNeighborTable.
Indexes
Column Syntax OID
fsPimNeighborAddress
The IP address of the PIM neighbor for which this entry
contains information.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1.1
fsPimNeighborIfIndex
The value of ifIndex for the interface used to reach this
PIM neighbor.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1.2
fsPimNeighborUpTime
The time since this PIM neighbor (last) became a neighbor
of the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1.3
fsPimNeighborExpiryTime
The minimum time remaining before this PIM neighbor will be
aged out.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1.4
fsPimNeighborModedeprecated
The active PIM mode of this neighbor. This object is
deprecated for PIMv2 routers since all neighbors on the
interface must be either dense or sparse as determined by
the protocol running on the interface.
Enumeration
Enumerated Values:
1dense
2sparse
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1.5
fsPimNeighborLanPruneDelay
The value of LAN Prune Delay field of the LAN Prune
Delay Option received from this neighbor. A value of
0 indicates that no LAN Prune Delay Option was
received from this neigbor.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1.6
fsPimNeighborOverrideInterval
The value of Override Interval field of the LAN Prune
Delay Option received from this neighbor. A value of
0 indicates that no LAN Prune Delay Option was
received from this neigbor.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1.7
fsPimNeighborTBit
The value of the T bit field of the LAN Prune
Delay Option received from this neighbor. The T bit
specifies the ability of the neighbor to disable
join suppression.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1.8
fsPimNeighborSRCapable
Evaluates to TRUE if this neighbor is using the State
Refresh Capable Option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1.9
fsPimNeighborDRPresent
Evaluates to TRUE if this neighbor is using the
Designated Router Option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.3.1.10

fsPimIpMRouteTable

table
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.4 · 1 row entry · 8 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsPimIpMRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-PIM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-PIM-MIB::fsPimIpMRouteTable' 
The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteTable defined in the IP
Multicast MIB.
fsPimIpMRouteEntry row .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.4.1
An entry (conceptual row) in the pimIpMRouteTable. There
is one entry per entry in the ipMRouteTable whose incoming
interface is running PIM.
Indexes
Column Syntax OID
fsPimIpMRouteUpstreamAssertTimer
The time remaining before the router changes its upstream
neighbor back to its RPF neighbor. This timer is called the
Assert timer in the PIM Sparse and Dense mode specification.
A value of 0 indicates that no Assert h…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.4.1.1
fsPimIpMRouteAssertMetric
The metric advertised by the assert winner on the upstream
interface, or 0 if no such assert is in received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.4.1.2
fsPimIpMRouteAssertMetricPref
The preference advertised by the assert winner on the
upstream interface, or 0 if no such assert is in effect.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.4.1.3
fsPimIpMRouteAssertRPTBit
The value of the RPT-bit advertised by the assert winner on
the upstream interface, or false if no such assert is in
effect.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.4.1.4
fsPimIpMRouteFlags
This object describes PIM-specific flags related to a
multicast state entry. See the PIM Sparse Mode
specification for the meaning of the RPT and SPT bits.
Enumeration
Enumerated Values:
0rpt
1spt
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.4.1.5
fsPimIpMRouteRPFNeighbor
The IP Address of the current RPF neighbor. If there
is an upstream Assert Winner, it will be the RPF
neighbor. Otherwise, the RPF neighbor will be
the next hop indicated by unicast routing.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.4.1.6
fsPimIpMRouteSourceTimer
The time before this router ceases originating State
Refresh messages for this route.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.4.1.7
fsPimIpMRouteOriginatorSRTTL
The TTL used in State Refresh messages originated by
this router for this route.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.4.1.8

fsPimIpMRouteNextHopTable

table
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.5 · 1 row entry · 6 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsPimIpMRouteNextHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-PIM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-PIM-MIB::fsPimIpMRouteNextHopTable' 
The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteNextHopTable defined in
the IP Multicast MIB.
fsPimIpMRouteNextHopEntry row .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.5.1
An entry (conceptual row) in the pimIpMRouteNextHopTable.
There is one entry per entry in the ipMRouteNextHopTable
whose interface is running PIM and whose
ipMRouteNextHopState is pruned(1).
Indexes
Column Syntax OID
fsPimIpMRouteNextHopPruneReason
This object indicates why the downstream interface was
pruned, whether in response to a PIM prune message or due to
PIM Assert processing.
Enumeration
Enumerated Values:
1other
2prune
3assert
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.5.1.1
fsPimIpMRouteNextHopAssertWinner
The IP Address of the Assert Winner.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.5.1.2
fsPimIpMRouteNextHopAssertTimer
The time remaining before the PIM router leaves the
current Assert state. A value of 0 indicates that the
router is in the No Info state.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.5.1.3
fsPimIpMRouteNextHopAssertMetric
The metric advertised by the Assert Winner.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.5.1.4
fsPimIpMRouteNextHopAssertMetricPref
The metric preference advertised by the Assert Winner.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.5.1.5
fsPimIpMRouteNextHopJoinPruneTimer
The time remaining before the PIM router reverts to
default operation on this interface. PIM-SM will
cease forwarding, PIM-DM will resume forwarding.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.5.1.6

fsPimRPSetTable

table
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.6 · 1 row entry · 7 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsPimRPSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-PIM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-PIM-MIB::fsPimRPSetTable' 
The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements.  When
the local router is not the BSR, this information is
obtained from received RP-Set messages.
fsPimRPSetEntry row .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.6.1
An entry (conceptual row) in the pimRPSetTable.
Indexes
Column Syntax OID
fsPimRPSetGroupAddress
The IP multicast group address which, when combined with
pimRPSetGroupMask, gives the group prefix for which this
entry contains information about the Candidate-RP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.6.1.1
fsPimRPSetGroupMask
The multicast group address mask which, when combined with
pimRPSetGroupAddress, gives the group prefix for which this
entry contains information about the Candidate-RP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.6.1.2
fsPimRPSetAddress
The IP address of the Candidate-RP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.6.1.3
fsPimRPSetHoldTime
The holdtime of a Candidate-RP.
secondsInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.6.1.4
fsPimRPSetExpiryTime
The minimum time remaining before the Candidate-RP will be
declared down.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.6.1.5
fsPimRPSetComponent
A number uniquely identifying the component. Each
protocol instance connected to a separate domain should have
a different index value.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.6.1.6
fsPimRPSetUpTime
Length of time that this rp has been up.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.6.1.7

fsPimComponentTable

table
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7 · 1 row entry · 9 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsPimComponentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-PIM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-PIM-MIB::fsPimComponentTable' 
The (conceptual) table containing objects specific to a PIM
domain.  One row exists for each domain to which the router
is connected.  A PIM-SM domain is defined as an area of the
network over which Bootstrap messages are forwarded.
Typically, a PIM-SM router will be a member of exactly one
domain.  This table also supports, however, routers which
may form a border between two PIM-SM domains and do not
forward Bootstrap messages between them.
fsPimComponentEntry row .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7.1
An entry (conceptual row) in the starPimComponentTable.
Indexes
Column Syntax OID
fsPimComponentIndex
A number uniquely identifying the component. Each protocol
instance connected to a separate domain should have a
different index value. Routers that only support membership
in a single PIM-SM domain should use a pimCo…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7.1.1
fsPimComponentBSRAddress
The IP address of the bootstrap router (BSR) for the local
PIM region.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7.1.2
fsPimComponentBSRExpiryTime
The minimum time remaining before the bootstrap router in
the local domain will be declared down. For candidate BSRs,
this is the time until the component sends an RP-Set
message. For other routers, this is the time u…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7.1.3
fsPimComponentCRPHoldTime
The holdtime of the component when it is a candidate RP in
the local domain.
secondsInteger32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7.1.4
fsPimComponentBSRUptime
Length of time that this router has been up.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7.1.5
fsPimComponentBSRPriority
The Priority of Bsr.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7.1.6
fsPimComponentBSRHashMaskLength
Length of a mask (32 bits maximum) that is to be ANDed with
the group address before the hash function is called.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7.1.7
fsPimComponentBSRNextBsrMessage
Time (in hours, minutes, and seconds) in which the next
bootstrap message is due from this BSR.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7.1.8
fsPimComponentNextCandRPAdv
Time (in hours, minutes, and seconds) in which the next
candidate RP advertisement will be sent.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.7.1.9

fsPimRPTable

table
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.13 · 1 row entry · 4 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsPimRPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-PIM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-PIM-MIB::fsPimRPTable' 
The (conceptual) table listing PIM version 2 information
for the Rendezvous Points (RPs) for IP multicast groups.
fsPimRPEntry row .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.13.1
An entry (conceptual row) in the pimRPTable.
Indexes
Column Syntax OID
fsPimRPGroupAddress
The IP multicast group address which, when combined with
pimRPSetGroupMask, gives the group prefix for which this
entry contains information about the Candidate-RP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.13.1.1
fsPimRPAddress
The IP address of the RP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.13.1.2
fsPimRPExpiryTime
The minimum time remaining before the RP will be
declared down. If the local router is not the BSR, this
value is 0.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.13.1.3
fsPimRPNextRPReachableIn
Indicates the time the next RP-reachable message will be sent.
Time is expressed in hours:minutes:seconds.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.13.1.4

fsPimStaticRPTable

table
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.14 · 1 row entry · 4 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsPimStaticRPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-PIM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-PIM-MIB::fsPimStaticRPTable' 
The (conceptual) table listing PIM version 2 information
for the Rendezvous Points (RPs) for IP multicast groups.
fsPimStaticRPEntry row .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.14.1
An entry (conceptual row) in the pimStaticRPTable.
Indexes
Column Syntax OID
fsPimStaticRPAddress
The IP address of the RP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.14.1.1
fsPimStaticRPAddressIsOverride
Indicates that if there is a conflict, the RP configured with
this command prevails over the RP learned by Bsr-RP.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.14.1.2
fsPimStaticRPAclName
Name of an access list that defines for which
multicast groups the RP should be used,the
default value means all groups should be
used.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.14.1.3
fsPimStaticRPStatus
The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.14.1.4

fsPimRpCandidateTable

table
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.15 · 1 row entry · 3 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsPimRpCandidateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-PIM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-PIM-MIB::fsPimRpCandidateTable' 
The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of pimComponentCRPHoldTime is
non-zero.  If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of pimComponentCRPHoldTime is non-
zero).
fsPimRpCandidateEntry row .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.15.1
An entry (conceptual row) in the pimRpCandidateTable.
Indexes
Column Syntax OID
fsPimRpCandidateIfindex
IP address associated with this interface type and number
is advertised as a candidate RP address.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.15.1.1
fsPimRpCandidateAclName
The name of Acl list,that defines the group
prefixes that are advertised in association
with the RP address,the default value means
all groups will be advertised in association
with the RP address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.15.1.2
fsPimRpCandidateStatus
The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.15.1.3