fsPimInterfaceHelloInterval

FS-PIM-MIB · .1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.6
MIB view Table view

Object

column r/w seconds Integer32 
The frequency at which PIM Hello messages are transmitted
on this interface.

Context

MIB
FS-PIM-MIB
OID
.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.6
Type
column
Access
readwrite
Status
current
Units
seconds
Parent
fsPimInterfaceEntry
Table
fsPimInterfaceTable
Siblings
27

Syntax

seconds Integer32

Values & Constraints

Object Constraints
range: 0-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsPimInterfaceIfIndex
The ifIndex value of this PIM interface.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.1
fsPimInterfaceHelloHoldtime
The value set in the Holdtime field of Hello messages transmitted on this interface. This should be 3.5 times the value of pimInterfaceHelloInterval.
columnseconds Integer32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.10
fsPimInterfaceLanPruneDelay
Turns the LAN Prune Delay Option off and on on this interface.
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.11
fsPimInterfacePropagationDelay
The value inserted into the LAN Prune Delay field of a LAN Prune Delay option on this interface.
columnmilliseconds Integer32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.12
fsPimInterfaceOverrideInterval
The value inserted into the Override Interval field of a LAN Prune Delay option on this interface.
columnInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.13
fsPimInterfaceGenerationID
Turns the Generation ID Option off and on on this interface.
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.14
fsPimInterfaceJoinPruneHoldtime
The value inserted into the Holdtime field of a Join/ Prune message sent on this interface. The value should be 3.5 times pimInterfaceJoinPruneInterval.
columnseconds Integer32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.15
fsPimInterfaceGraftRetryInterval
The interval a PIM router waits for a Graft Ack before resending a Graft on this interface.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.16
fsPimInterfaceMaxGraftRetries
The maximum number of times this router will resend a Graft on this interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.17
fsPimInterfaceSRTTLThreshold
The Time To Live in a PIM-DM Refresh message at which it is not forwarded on this interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.18
fsPimInterfaceLanDelayEnabled
Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.19
fsPimInterfaceAddress
The IP address of the PIM interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.2
fsPimInterfaceSRCapable
Evaluates to TRUE if all routers on this interface are using the State Refresh Capable Option.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.20
fsPimInterfaceDRPriority
The Designater Router Priority inserted into the DR priority option on this interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.21
fsPimInterfaceNbrCounter
The number of interface's neighbour.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.22
fsPimInterfaceBsrBorderEnabled
Enabled means Define a PIM bootstrap message boundary for the PIM domain,use disabled to remove the PIM border.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.23
fsPimInterfaceCountIn
Number of packets into the interface since the router has been up.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.24
fsPimInterfaceCountOut
Number of packets out of the interface since the router has been up.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.25
fsPimInterfaceEnabled
use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.26
fsPimNeighborFilterAcl
The name of the neighbor filter address list,which limits the scope of the neighbor,The default value means all neighbors will be allowed.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.27
fsPimDrSupportAddressBound
The name of the DR support address list,which limits the scope of the souce address ,this will be only used when the interface is DR, The default value means all souce address w…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.28
fsPimInterfaceNetMask
The network mask for the IP address of the PIM interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.3
fsPimInterfaceMode
The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.4
fsPimInterfaceDR
The Designated Router on this PIM interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.5
fsPimInterfaceJoinPruneInterval
The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.7
fsPimInterfaceCBSRPreference
The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.
columnInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.8
fsPimInterfaceTrigHelloInterval
The maximum time before a triggered PIM Hello message is transmitted on this interface.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.27.1.1.2.1.9