fsIfPortType

FS-INTERFACE-MIB · .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.2
MIB view Table view

Object

column Enumeration 
Port type of this port, list as above.
port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS,
and system doesn't distinguish.
port1000MBASEFX indicates that port is port1000MBASEFLX or port1000MBASEFSX,
and system doesn't distinguish.
              
This attribute apply physical port

Context

MIB
FS-INTERFACE-MIB
OID
.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.2
Type
column
Access
readonly
Status
current
Parent
fsIfEntry
Table
fsIfTable
Siblings
49

Syntax

Enumeration

Values & Constraints

Enumerated Values
1unknown
2port10M100MBASETX
3port100MBASEFXL
4port100MBASEFXS
5port1000MBASESX
6port1000MBASELX
7port1000MBASETX
8portGBIC
9port100MBASEFX
10port1000MBASEFX
11portSFP
12port10GBASESR
13port10GBASELR
14port10GBASEER
15port10GBASELX4
16port10GBASESW
17port10GBASELW
18port10GBASEEW
19port10GBASE
20port40GBASEKR
21port40GBASECR
22port40GBASELR
23port40GBASESR
24port40GBASE
25port100GBASECR
26port100GBASESR
27port100GBASELR
28port100GBASEER
29port100GBASE
50port155MCPOS
51port622MCPOS
52port2G5CPOS
53port10GCPOS
54port155MPOS
55port622MPOS
56port2G5POS
57port10GPOS
58port155MATM
59port622MATM
60port2G5ATM
61port10GATM
62portE1ELC
63port20GBASE
64port25GBASE
65port2500MBASE
66port5000MBASE

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsIfIndexcolumnFS-TCIfIndex.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.1
fsIfIpBroadcast
Broadcast address of the interface. if broadcast address not configured on interface, return 0.0.0.0
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.10
fsIfLayercolumnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.11
fsIfMode
This value is meaning for only physical port and aggreate port
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.12
fsIfCounterClear
Setting its to any value but 0, will clear counters of this interface. Setting its value to 0 will cause no action of the agent. and when query will always return 0.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.13
fsIfEntryStatus
Status of this entry, set this object to valid will create a interface, and set its value to invalid will delete the interface of this entry.
columnFS-TCConfigStatus.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.14
fsIfMediumType
Port medium type of this port,fiber or copper.
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.15
fsIfDownCounter
The counters of linkdown times of the interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.16
fsIfInOctets
The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management s…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.17
fsIfOutOctets
The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the manag…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.18
fsIfBcastInhibit
The percentage of the broadcast storm restraint on the interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.19
fsIfNegotiation
The negotiation status of the interface.
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.20
fsIfPhysAddress
The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must defi…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.21
fsIfAdminSpeedRW
port speed settings. This attribute apply physical port and aggreate port
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.22
fsIfAdminDuplexRW
port duplex settings. This attribute apply physical port and aggreate port
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.23
fsIfModeRW
This value is meaning for only physical port and aggreate port
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.24
fsIfSpeed
An estimate of the interface's current bandwidth in units of Mbits per second.
columnRFC1155-SMIGauge.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.25
fsifAdminStatus
the interface keeps the admin state .
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.26
fsifOperStatus
the interface keeps the oper state .
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.27
fsIfInNUcastPkts
The counter of receiving packets contain BROADCAST and PACKET_MULTICAST .
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.28
fsIfOutNUcastPkts
The counter of sending packets contain BROADCAST and PACKET_MULTICAST .
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.29
fsIfFlowControlAdminStatus
Flow control of a port management status. This attribute apply physical port and aggreate port
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.3
fsIfUpDownTimes
The counters of linkup and linkdown times of the interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.30
fsifAdminStatusw
The desired state of the interface. When a managed system initializes, all interfaces start with ifAdminStatus in the admindown(1) state. As a result of either explicit manageme…
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.31
fsifOperStatusw
The current operational state of the interface. If fsApIfAdminStatus is admindown(2) then fsApIfOperStatus should be admindown(2). If fsApIfAdminStatus is changed to up(0) then…
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.32
fsifSpeedw
An estimate of the interface's current bandwidth in units of Mbits per second.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.33
fsifMacAddress
The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must defin…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.34
fsifLastChange
The length of the time that comes current state .
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.35
fsIfInPkts
The number of packets received on this interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the m…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.36
fsIfDiscard
The number of bound packets which were chosen to be discarded even though no errors. One possible reason for discarding such a packet could be to free up buffer space. …
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.37
fsIfBandwidthUsage
Current bandwidth utilization of interface.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.38
fsIfInBitsRate
The average input packet-rate over a period of time(configuration by interface command 'load-interval') in bits per second on this interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.39
fsIfFlowControlOperStatus
Oper status: after the negotiation between two ports connetted the flow contrl status. This attribute apply physical port and aggreate port
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.4
fsIfInPktRate
The average input packet-rate over a period of time(configuration by interface command 'load-interval') in packets per second on this interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.40
fsIfOutBitsRate
The average output packet-rate over a period of time(configuration by interface command 'load-interval') in bits per second on this interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.41
fsIfOutPktRate
The average output packet-rate over a period of time(configuration by interface command 'load-interval') in packets per second on this interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.42
fsIfInBandwidthUsage
RX bandwidth utilization ratio of interface.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.43
fsIfOutBandwidthUsage
TX bandwidth utilization ratio of interface.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.44
fsIfInErrorPktsRate
Input packet error rate.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.45
fsIfOutErrorPktsRate
Output packet error rate.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.46
fsIfInDropPktsRate
Input packet discarded rate.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.47
fsIfOutDropPktsRate
Output packet discarded rate.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.48
fsIfOutNoBuffer
Ouyput drop packet rate on this interface due to resource lack.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.49
fsIfAdminSpeed
port speed settings. This attribute apply physical port and aggreate port
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.5
fsIfOutPkts
The number of packets sent on this interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the manag…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.50
fsIfAdminDuplex
port duplex settings. This attribute apply physical port and aggreate port
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.6
fsIfOperSpeed
After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unknown(4). …
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.7
fsIfOperDuplex
After two port have negotiated the duplex status, and this object is the working duplex status. while the port link status is down , then the speed status is unknown(3). …
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.8
fsIfManageStatus
Management status of the interface.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.9