fsIfBcastInhibit
FS-INTERFACE-MIB ·
.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.19
Object
The percentage of the broadcast storm restraint on the interface.
Context
- MIB
- FS-INTERFACE-MIB
- OID
.1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsIfEntry
- Table
- fsIfTable
- Siblings
- 49
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsIfIndex | column | FS-TCIfIndex | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.1 |
| fsIfIpBroadcast Broadcast address of the interface. if broadcast address not configured on interface, return 0.0.0.0 | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.10 |
| fsIfLayer | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.11 |
| fsIfMode This value is meaning for only physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.12 |
| fsIfCounterClear Setting its to any value but 0, will clear counters of this interface.
Setting its value to 0 will cause no action of the agent. and when
query will always return 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.13 |
| fsIfEntryStatus Status of this entry, set this object to valid will create a interface,
and set its value to invalid will delete the interface of this entry. | column | FS-TCConfigStatus | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.14 |
| fsIfMediumType Port medium type of this port,fiber or copper. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.15 |
| fsIfDownCounter The counters of linkdown times of the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.16 |
| fsIfInOctets The total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management s… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.17 |
| fsIfOutOctets The total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the manag… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.18 |
| fsIfPortType Port type of this port, list as above.
port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS,
and system doesn't distinguish.
port1000MBASEFX indicates that por… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.2 |
| fsIfNegotiation The negotiation status of the interface. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.20 |
| fsIfPhysAddress The interface's address at its protocol sub-layer. For
example, for an 802.x interface, this object normally
contains a MAC address. The interface's media-specific MIB
must defi… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.21 |
| fsIfAdminSpeedRW port speed settings.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.22 |
| fsIfAdminDuplexRW port duplex settings.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.23 |
| fsIfModeRW This value is meaning for only physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.24 |
| fsIfSpeed An estimate of the interface's current bandwidth in units of
Mbits per second. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.25 |
| fsifAdminStatus the interface keeps the admin state . | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.26 |
| fsifOperStatus the interface keeps the oper state . | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.27 |
| fsIfInNUcastPkts The counter of receiving packets contain BROADCAST and PACKET_MULTICAST . | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.28 |
| fsIfOutNUcastPkts The counter of sending packets contain BROADCAST and PACKET_MULTICAST . | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.29 |
| fsIfFlowControlAdminStatus Flow control of a port management status.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.3 |
| fsIfUpDownTimes The counters of linkup and linkdown times of the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.30 |
| fsifAdminStatusw The desired state of the interface. When a managed system initializes, all
interfaces start with ifAdminStatus in the admindown(1)
state. As a result of either explicit manageme… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.31 |
| fsifOperStatusw The current operational state of the interface.
If fsApIfAdminStatus is admindown(2) then
fsApIfOperStatus should be admindown(2). If fsApIfAdminStatus is
changed to up(0) then… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.32 |
| fsifSpeedw An estimate of the interface's current bandwidth in units of
Mbits per second. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.33 |
| fsifMacAddress The interface's address at its protocol sub-layer.
For example, for an 802.x interface, this object
normally contains a MAC address. The interface's
media-specific MIB must defin… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.34 |
| fsifLastChange The length of the time that comes current state . | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.35 |
| fsIfInPkts The number of packets received on this interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the m… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.36 |
| fsIfDiscard The number of bound packets which were chosen to be
discarded even though no errors. One possible reason for
discarding such a packet could be to free up buffer space.
… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.37 |
| fsIfBandwidthUsage Current bandwidth utilization of interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.38 |
| fsIfInBitsRate The average input packet-rate over a period of time(configuration by interface command 'load-interval')
in bits per second on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.39 |
| fsIfFlowControlOperStatus Oper status: after the negotiation between two ports connetted
the flow contrl status.
This attribute apply physical port and aggreate port | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.4 |
| fsIfInPktRate The average input packet-rate over a period of time(configuration by interface command 'load-interval')
in packets per second on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.40 |
| fsIfOutBitsRate The average output packet-rate over a period of time(configuration by interface command 'load-interval')
in bits per second on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.41 |
| fsIfOutPktRate The average output packet-rate over a period of time(configuration by interface command 'load-interval')
in packets per second on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.42 |
| fsIfInBandwidthUsage RX bandwidth utilization ratio of interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.43 |
| fsIfOutBandwidthUsage TX bandwidth utilization ratio of interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.44 |
| fsIfInErrorPktsRate Input packet error rate. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.45 |
| fsIfOutErrorPktsRate Output packet error rate. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.46 |
| fsIfInDropPktsRate Input packet discarded rate. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.47 |
| fsIfOutDropPktsRate Output packet discarded rate. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.48 |
| fsIfOutNoBuffer Ouyput drop packet rate on this interface due to resource lack. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.49 |
| fsIfAdminSpeed port speed settings.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.5 |
| fsIfOutPkts The number of packets sent on this interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the manag… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.50 |
| fsIfAdminDuplex port duplex settings.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.6 |
| fsIfOperSpeed After two port have negotiated the speed status,and this object
is the working speed status. while the port link status is down ,
then the speed status is unknown(4).
… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.7 |
| fsIfOperDuplex After two port have negotiated the duplex status, and this object
is the working duplex status. while the port link status is down ,
then the speed status is unknown(3).
… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.8 |
| fsIfManageStatus Management status of the interface. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.9 |