fsApIfOutQLen
FS-INTERFACE-MIB ·
.1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.22
Object
The length of the output packet queue (in packets).
Context
- MIB
- FS-INTERFACE-MIB
- OID
.1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.22- Type
- column
- Access
- readonly
- Status
- deprecated
- Parent
- fsApIfEntry
- Table
- fsApIfTable
- Siblings
- 48
Syntax
RFC1155-SMIGauge
- Source
- RFC1155-SMIGauge
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsApPhysAddress The ap's address at its protocol sub-layer.
The ap's media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do n… | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.1 |
| fsApIfLastChange The value of sysUpTime at the time the interface
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network … | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.10 |
| fsApIfInOctets The total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of t… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.11 |
| fsApIfInUcastPkts The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
Disconti… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.12 |
| fsApIfInNUcastPkts deprecated The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast or broadcast address at this sub-layer.
Discontinuit… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.13 |
| fsApIfInDiscards The number of inbound packets which were chosen to be
discarded even though no errors had been detected to
prevent their being deliverable to a higher-layer
protocol. One possibl… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.14 |
| fsApIfInErrors For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or f… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.15 |
| fsApIfInUnknownProtos For packet-oriented interfaces, the number of packets
received via the interface which were discarded
because of an unknown or unsupported protocol. For
character-oriented or fix… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.16 |
| fsApIfOutOctets The total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initializati… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.17 |
| fsApIfOutUcastPkts The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including tho… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.18 |
| fsApIfOutNUcastPkts deprecated The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast or broadcast address at this
sub-layer, including those t… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.19 |
| fsApIfIndex A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remai… | column | FS-TCIfIndex | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.2 |
| fsApIfOutDiscards The number of outbound packets which were chosen to
be discarded even though no errors had been detected
to prevent their being transmitted. One possible
reason for discarding su… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.20 |
| fsApIfOutErrors For packet-oriented interfaces, the number of
outbound packets that could not be transmitted because
of errors. For character-oriented or fixed-length
interfaces, the number of o… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.21 |
| fsApIfLinkUPTimes Vlaues Of Linkup Times. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.23 |
| fsApIfInDataOctets The data octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the manageme… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.24 |
| fsApIfOutDataOctets The data octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the m… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.25 |
| fsApIfMgmtUploadOctets The upload octets received on the mgmt interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the m… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.26 |
| fsApIfMgmtDownloadOctets The download octets transmitted out of the
mgmt interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.27 |
| fsApIfSpeedw An estimate of the interface's current bandwidth in units of
Mbits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.28 |
| fsApIfMtuw The size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.29 |
| fsApIfDescr A textual string containing information about the
interface. This string should include the name of the
manufacturer, the product name and the version of the
interface hardware/s… | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.3 |
| fsApIfPhysAddressw The interface's address at its protocol sub-layer.
For example, for an 802.x interface, this object
normally contains a MAC address. The interface's
media-specific MIB must defin… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.30 |
| fsApIfInUcastPktsw The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
Disconti… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.31 |
| fsApIfInNUcastPktsw deprecated The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast or broadcast address at this sub-layer.
Discontinuit… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.32 |
| fsApIfOutUcastPktsw The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including tho… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.33 |
| fsApIfOutNUcastPktsw deprecated The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast or broadcast address at this
sub-layer, including those t… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.34 |
| fsApIfLinkUPTimesw The counters of linkup and linkdown times of the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.35 |
| fsApIfInPkts The total number of packets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of … | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.36 |
| fsApIfInFlow The flow rate of data octets in units of Bytes per-second received on the interface,
including framing characters.
Discontinuities in the value of this counter can … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.37 |
| fsApIfOutFlow The flow rate of data octets in units of Bytes per-second transmitted out of the
interface, including framing characters.
Discontinuities in the value of this count… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.38 |
| fsApIfInBrdcastPkts The total number of broadcast packets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initiali… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.39 |
| fsApIfType The type of interface. Additional values for ifType
are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual conventi… | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.4 |
| fsApIfOutBrdcastPkts The total number of broadcast packets transmitted out of the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-i… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.40 |
| fsApIfInMulcastPkts The total number of multicast packets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initiali… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.41 |
| fsApIfOutMulcastPkts The total number of multicast packets transmitted out of the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-i… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.42 |
| fsApIfInPayloadOctets The total number of payload octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initializat… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.43 |
| fsApIfOutPayloadOctets The total number of payload octets transmitted out of the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-init… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.44 |
| fsApIfAlias A textual string containing alias information about the
interface. | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.45 |
| fsApIfInDateRate The flow rate of data octets in units of Kilo-Bits per-second received on the interface,
including framing characters.
Discontinuities in the value of this counter … | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.46 |
| fsApIfOutDateRate The flow rate of data octets in units of Kilo-Bits per-second transmitted out of the
interface, including framing characters.
Discontinuities in the value of this c… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.47 |
| fsApifInNormalPkts The total number of normal packets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initializat… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.48 |
| fsApIfOutPkts The total number of packets transmitted out of the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initializat… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.49 |
| fsApIfMtu The size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.5 |
| fsApIfSpeed An estimate of the interface's current bandwidth in units of
Mbits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.6 |
| fsApIfPhysAddress The interface's address at its protocol sub-layer.
For example, for an 802.x interface, this object
normally contains a MAC address. The interface's
media-specific MIB must defin… | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.7 |
| fsApIfAdminStatus The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with ifAdmi… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.8 |
| fsApIfOperStatus The current operational state of the interface.
If fsApIfAdminStatus is admindown(2) then
fsApIfOperStatus should be admindown(3). If fsApIfAdminStatus is
changed to up(1) then… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.10.1.13.1.9 |