snStackingConfigUnitConfigStackPort

FOUNDRY-SN-STACKING-MIB · .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3
Commands MIB view Table view

Object

column deprecated r/w IF-MIBInterfaceIndexOrZero 
The IfIndex for the configured stacking port. If no 
stacking port is configured, it will be displayed zero 
and the first  two 10G ports as the default stacking ports. 
Enter zero to remove the configured stacking port. 
              
Note that this object is deprecated from FI8090 because 
the default ports are no longer supported. Use snStackingConfigUnitStackPort1
or snStackingConfigUnitStackPort2 for stack ports. Thus, the value of this 
object is one of stack port or zero for backup capability.

Context

MIB
FOUNDRY-SN-STACKING-MIB
OID
.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3
Type
column
Access
readwrite
Status
deprecated
Parent
snStackingConfigUnitEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-SN-STACKING-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitConfigStackPort'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'FOUNDRY-SN-STACKING-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitConfigStackPort.<snStackingConfigUnitIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'FOUNDRY-SN-STACKING-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitConfigStackPort'

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32
Display format
d
Type Description
This textual convention is an extension of the
InterfaceIndex convention.  The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system.  This extension permits the
additional value of zero.  the value zero is object-specific
and must therefore be defined as part of the description of
any object which uses this syntax.  Examples of the usage of
zero might include situations where interface was unknown,
or when none or all interfaces need to be referenced.

Values & Constraints

Type Constraints
range: 0..2147483647