FOUNDRY-SN-STACKING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
43

snStackingConfigUnitTable

table
.1.3.6.1.4.1.1991.1.1.3.31.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk snStackingConfigUnitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-SN-STACKING-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitTable' 
Stacking configuration unit table.
snStackingConfigUnitEntry row .1.3.6.1.4.1.1991.1.1.3.31.2.1.1
An entry in the stacking configuration table.
Indexes
Column Syntax OID
snStackingConfigUnitIndex
The stacking unit Id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.1
snStackingConfigUnitPriority
The priority in Active/backup eclection.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.2
snStackingConfigUnitConfigStackPortdeprecated
The IfIndex for the configured stacking port. If no
stacking port is configured, it will be displayed zero
and the first two 10G ports as the default stacking ports.
Enter zero to remove the configured stacking port…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3
snStackingConfigUnitRowStatus
This object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row

If the row exists, then a SET with value of create(4)
returns e…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
 .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.4
snStackingConfigUnitType
A description of the configured/active system type for each unit.
FOUNDRY-SN-AGENT-MIBDisplayString .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.5
snStackingConfigUnitState
A state for each unit
Enumeration
Enumerated Values:
1local
2remote
3reserved
4empty
 .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.6
snStackingConfigUnitStackPort1
A stack port for the unit. It returns 0 if stack port does not exist.
Entering 0 means to delete this stack port.
Note that the maximum stack port on an unit is 2.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.7
snStackingConfigUnitStackPort2
Other one stack port for the unit. It returns 0 if stack port does not exist.
Entering 0 means to delete this stack port.
Note that the maximum stack port on an unit is 2.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.8
snStackingConfigUnitConnectPort1deprecated
First connect port for a peripheral unit in a mixed stacking system. A peripheral
unit can have up to two connect ports that is is conected to. They are suggested
neighbor linking ports. Thus, they could be code units'…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.9
snStackingConfigUnitConnectPort2deprecated
second connect port for a peripheral unit in a mixed stacking system. A peripheral
unit can have up to two connect ports that is is conected to. They are suggested
neighbor linking ports. Thus, they could be code units…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.10
snStackingConfigUnitStackTrunk1
A list of interface indices which are the port membership
of a stack trunk on unit. Each interface index is a 32-bit integer
in big endian order. It returns NULL if stack trunk does not exist.
Entering empty octet str…
OctetStringr/w .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.11
snStackingConfigUnitStackTrunk2
A list of interface indices which are the port membership
of a stack trunk on unit. Each interface index is a 32-bit integer
in big endian order. It returns NULL if stack trunk does not exist.
Entering empty octet str…
OctetStringr/w .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.12
snStackingConfigUnitName
A name description of stacking unit.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.13

snStackingOperUnitTable

table
.1.3.6.1.4.1.1991.1.1.3.31.2.2 · 1 row entry · 14 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk snStackingOperUnitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-SN-STACKING-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-STACKING-MIB::snStackingOperUnitTable' 
Stacking operation unit table.
snStackingOperUnitEntry row .1.3.6.1.4.1.1991.1.1.3.31.2.2.1
An entry in the stacking operation table.
Indexes
Column Syntax OID
snStackingOperUnitIndex
The stacking unit Id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.1
snStackingOperUnitRole
A role for each unit
Enumeration
Enumerated Values:
1other
2active
3standby
4member
5standalone
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.2
snStackingOperUnitMac
A MAC address for each unit
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.3
snStackingOperUnitPriority
The priority in Active/backup eclection.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.4
snStackingOperUnitState
A state for each unit
Enumeration
Enumerated Values:
1local
2remote
3reserved
4empty
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.5
snStackingOperUnitDescription
Describes the stacking state for each unit.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.6
snStackingOperUnitStackPort1
First stack port for each unit. It returns 0 if stack port does not exist.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.7
snStackingOperUnitStackPort1State
The first stack port state for each unit.
Enumeration
Enumerated Values:
1other
2up
3down
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.8
snStackingOperUnitStackPort2
Second stack port for each unit. It returns 0 if stack port does not exist.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.9
snStackingOperUnitStackPort2State
The second stack port state for each unit.
Enumeration
Enumerated Values:
1other
2up
3down
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.10
snStackingOperUnitNeighbor1
Stacking neighbor unit (left) number.
If there is no neighbor unit, then it returns 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.11
snStackingOperUnitNeighbor2
Stacking neighbor unit (right) number.
If there is no neighbor unit, then it returns 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.12
snStackingOperUnitImgVer
The version of the running software image
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.13
snStackingOperUnitBuildlVer
The version of the running software build
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.14

snStackingConfigStackTrunkTable

table deprecated
.1.3.6.1.4.1.1991.1.1.3.31.2.3 · 1 row entry · 6 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk snStackingConfigStackTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-SN-STACKING-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkTable' 
Stacking configuration stack trunk table.
snStackingConfigStackTrunkEntry row .1.3.6.1.4.1.1991.1.1.3.31.2.3.1
An entry in the stacking configuration Stack trunk table.
Indexes
Column Syntax OID
snStackingConfigStackTrunkUnitdeprecated
The stacking unit Id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.31.2.3.1.1
snStackingConfigStackTrunkPort1deprecated
The IfIndex for the first (primary) port of the configured stack trunk.
There are two ports per stack trunk. In some case, a physical port may contain
more than one port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G por…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.3.1.2
snStackingConfigStackTrunkPort2deprecated
The IfIndex for the second port of the configured stack trunk.
There are two ports per stack trunk. In some case, a physical port may contain
more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G port…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.3.1.3
snStackingConfigStackTrunkRowStatusdeprecated
This object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row

If the row exists, then a SET with value of create(4)
returns e…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.1991.1.1.3.31.2.3.1.4
snStackingConfigStackTrunkNumPort1deprecated
Number of logical ports for the first (primary) port of the configured stack trunk.
In some case, a physical port may contain more than one logical port,
e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.31.2.3.1.5
snStackingConfigStackTrunkNumPort2deprecated
Number of logical ports for the second port of the configured stack trunk.
In some case, a physical port may contain more than one logical port,
e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the p…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.31.2.3.1.6

snStackingConfigPeriPortTable

table deprecated
.1.3.6.1.4.1.1991.1.1.3.31.2.4 · 1 row entry · 3 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk snStackingConfigPeriPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-SN-STACKING-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortTable' 
Stacking configuration peripheral port table.
snStackingConfigPeriPortEntry row .1.3.6.1.4.1.1991.1.1.3.31.2.4.1
An entry in the stacking configuration peripheral port table.
Indexes
Column Syntax OID
snStackingConfigPeriPortUnitdeprecated
The stacking unit Id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.31.2.4.1.1
snStackingConfigPeriPortPortdeprecated
The IfIndex for the configured mixed stacking peripheral port.
It is up to eight peripheral ports per unit.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.4.1.2
snStackingConfigPeriPortRowStatusdeprecated
This object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row

If the row exists, then a SET with value of create(4)
returns e…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.1991.1.1.3.31.2.4.1.3

snStackingConfigPeriTrunkTable

table deprecated
.1.3.6.1.4.1.1991.1.1.3.31.2.5 · 1 row entry · 4 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk snStackingConfigPeriTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-SN-STACKING-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkTable' 
Stacking configuration peripheral trunk table.
snStackingConfigPeriTrunkEntry row .1.3.6.1.4.1.1991.1.1.3.31.2.5.1
An entry in the stacking configuration peripheral trunk table.
Indexes
Column Syntax OID
snStackingConfigPeriTrunkUnitdeprecated
The stacking unit Id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.31.2.5.1.1
snStackingConfigPeriTrunkPort1deprecated
The IfIndex for the first port of the configured mixed stacking peripheral trunk.
There are two ports per peripheral trunk. It is up to four peripheral trunks per unit.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.5.1.2
snStackingConfigPeriTrunkPort2deprecated
The IfIndex for the second port of the configured mixed stacking peripheral trunk.
There are two ports per peripheral trunk. It is up to four peripheral trunks per unit.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.5.1.3
snStackingConfigPeriTrunkRowStatus
This object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row

If the row exists, then a SET with value of create(4)
returns e…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.1991.1.1.3.31.2.5.1.4

snStackingNeighborPortTable

table
.1.3.6.1.4.1.1991.1.1.3.31.2.6 · 1 row entry · 3 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk snStackingNeighborPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-SN-STACKING-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-STACKING-MIB::snStackingNeighborPortTable' 
Stacking neighbor port table.
snStackingNeighborPortEntry row .1.3.6.1.4.1.1991.1.1.3.31.2.6.1
An entry in the stacking neighborport table.
Indexes
Column Syntax OID
snStackingNeighborPortUnit
The stacking unit Id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.31.2.6.1.1
snStackingNeighborPortStackPort
The IfIndex for the stack port on this unit.
if it is a stack trunk, then this port is the first port
of stack trunk.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.6.1.2
snStackingNeighborPortNeighborPort
The IfIndex for the neighbor port of the stack port on this unit.
if it is a stack trunk, then this port is the first port of stack
trunk on the neighbor unit.
It returns 0 if neighbor port does not exist for this stac…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1991.1.1.3.31.2.6.1.3