pwEnetEntry

FOUNDRY-PW-ENET-STD-MIB · .1.3.6.1.4.1.1991.3.1.4.1.1.1

Object

row

This table is indexed by the same index that was created
for the associated entry in the PW generic table in the
PW-STD-MIB module.
The pwIndex and the pwEnetPwInstance are used as indexes
to allow multiple VLANs to exist on the same PW.
            
An entry is created in this table by the agent for every
entry in the pwTable with a pwType of 'ethernetTagged'
or 'ethernet'. Additional rows may be created by the
operator or the agent if multiple entries are required for
the same PW.
            
The value of pwEnetPwInstance can be arbitrary selected
to make the row unique, however implementations that know
the VLAN field value when the row is created MAY use the
value of the VLAN itself for better readability and
backward compatibility with older versions of this MIB
module.
            
This table provides Ethernet port mapping and VLAN
configuration for each Ethernet PW.
            
All read-create object in this table MAY be changed at any
time, however change of some objects (for example
pwEnetVlanMode) during PW forwarding state MAY cause traffic
disruption.
            
Manual entries in this table SHOULD be preserved after a
re-boot, the agent MUST ensure the integrity of those
entries. If the set of entires of a specific row are found to
be non consistent after reboot, the PW pwOperStatus MUST be
declared as notPresent(5).

Context

MIB: FOUNDRY-PW-ENET-STD-MIB
OID: .1.3.6.1.4.1.1991.3.1.4.1.1.1
Type: row
Status: current
Parent: pwEnetTable
Table: pwEnetTable
Children: 8

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
pwEnetPwInstance If multiple rows are mapped to the same PW, this index is used to uniquely identify the individual row. If the value of the VLAN field is known at the time of of row creation, the…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1991.3.1.4.1.1.1.1`
pwEnetPwVlan This Object defines the (service delimiting) VLAN field value on the PW. The value of 4097 MUST be used if the object is not applicable, for example when mapping all packets from …	column	FOUNDRY-PW-TC-STD-MIBPwVlanCfg	`.1.3.6.1.4.1.1991.3.1.4.1.1.1.2`
pwEnetVlanMode This object indicates the mode of VLAN handling between the port or the virtual port associated with the PW and the PW encapsulation. - 'other' indicates an operati…	column	Enumeration	`.1.3.6.1.4.1.1991.3.1.4.1.1.1.3`
pwEnetPortVlan This object defines if the mapping between the original port (physical port or VPLS virtual port) to the PW is VLAN based or not. In case of VLAN mapping, this object indicates th…	column	FOUNDRY-PW-TC-STD-MIBPwVlanCfg	`.1.3.6.1.4.1.1991.3.1.4.1.1.1.4`
pwEnetPortIfIndex This object is used to specify the ifIndex of the Ethernet port associated with this PW for point-to-point Ethernet service, or the ifIndex of the virtual interface of the VPLS in…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.1991.3.1.4.1.1.1.5`
pwEnetPwIfIndex If the PW is modeled as an ifIndex in the ifTable, this object indicates the value of the ifIndex representing the Ethernet PW on the PSN side in the Etherlike-MIB. Note that this…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.1991.3.1.4.1.1.1.6`
pwEnetRowStatus This object enables creating, deleting and modifying this row.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.1991.3.1.4.1.1.1.7`
pwEnetStorageType This object indicates the storage type of this row.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.1991.3.1.4.1.1.1.8`

Indexes

Object	Type	Syntax	OID
FOUNDRY-PW-STD-MIBpwIndex A unique index for the conceptual row identifying a PW within this table.	column	FOUNDRY-PW-TC-STD-MIBPwIndexType	`.1.3.6.1.4.1.1991.3.1.2.1.2.1.1`
pwEnetPwInstance If multiple rows are mapped to the same PW, this index is used to uniquely identify the individual row. If the value of the VLAN field is known at the time of of row creation, the…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1991.3.1.4.1.1.1.1`