f3L3QosPolicerIndex

F3-L3-MIB · .1.3.6.1.4.1.2544.1.12.37.1.7.1.1
MIB view Table view

Object

column r/w Integer32 
The Policer Index that represents the COS level.  This
is applicable in case of a Multi COS flow. Index 1
represents COS 0; Index 2 represents COS 1 and so on. 
              
In release 5.6CC the range is extended to 1..16 to support duplicate
N2A policers on a Flow. The duplicate policers are created under a Flow 
if network interface of the Flow is ERP Group or Split Horizon Group. 
In case of multi-cos Flow indices 1..8 represent policers of COS 0..7 
going from Network 1 port; indices 9..16 represent policers for COS 0..7 
going from Network 2 port.
In case of single-cos Flow index 1 represents policer going from Network 1
port; index 9 represents policer going from Network 2 port.

Context

MIB
F3-L3-MIB
OID
.1.3.6.1.4.1.2544.1.12.37.1.7.1.1
Type
column
Access
readwrite
Status
current
Parent
f3L3QosPolicerEntry
Table
f3L3QosPolicerTable
Siblings
14

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-16

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
f3L3QosPolicerEBS
This object allows specification of the Excess Burst Size (EBS) on the Policer.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.37.1.7.1.10
f3L3QosPolicerAlgorithm
This object allows specification of Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
columnCM-FACILITY-MIBPolicerAlgorithmType.1.3.6.1.4.1.2544.1.12.37.1.7.1.11
f3L3QosPolicerColorMode
This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
columnCM-FACILITY-MIBPolicerColorMode.1.3.6.1.4.1.2544.1.12.37.1.7.1.12
f3L3QosPolicerCouplingFlag
This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.37.1.7.1.13
f3L3QosPolicerStorageType
The type of storage configured for this entry.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.2544.1.12.37.1.7.1.14
f3L3QosPolicerRowStatus
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writ…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.12.37.1.7.1.15
f3L3QosPolicerAdminState
This object represents the Administrative State of the QOS Flow Policer.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.37.1.7.1.2
f3L3QosPolicerOperationalState
This object represents the Operational State of the QOS Flow Policer.
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.37.1.7.1.3
f3L3QosPolicerSecondaryState
This object represents the Secondary State of the QOS Flow Policer.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.37.1.7.1.4
f3L3QosPolicerCIRLo
This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the lower 32 bits of the CIR.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.37.1.7.1.5
f3L3QosPolicerCIRHi
This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the upper 32 bits of the CIR.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.37.1.7.1.6
f3L3QosPolicerEIRLo
This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.37.1.7.1.7
f3L3QosPolicerEIRHi
This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the upper 32 bits of the EIR.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.37.1.7.1.8
f3L3QosPolicerCBS
This object allows specification of the Commited Burst Size (CBS) on Policer.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.37.1.7.1.9