F3-L3-MIB Table View

f3DhcpRelayAgentAdminState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.1.1.1

f3DhcpRelayAgentAlias

The DHCP relay agent alias.

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.2544.1.12.37.1.1.1.2

The admin state of this DCHP relay agent.

f3DhcpRelayAgentSecondaryState

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.37.1.1.1.3

The secondary state of this DCHP relay agent.

f3DhcpRelayAgentOperationalState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.37.1.1.1.4

The operational state of this DCHP relay agent.

f3DhcpRelayAgentIpVersion

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.37.1.1.1.5

The Ip version of this DCHP relay agent.

CM-COMMON-MIBIpVersionr/w

Type Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.2544.1.12.37.1.1.1.6

f3DhcpRelayAgentServerIpAddress

The Ipv4 address of this DCHP relay agent.

f3DhcpRelayAgentOp82SubOp9ControlEnabled

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.1.1.7

This object describes the suboption9 of the option82 whether enabled.

f3DhcpRelayAgentOp82SubOp9Value

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.1.1.8

This object describes the vendor string if the suboption9 enabled.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2544.1.12.37.1.1.1.9

f3DhcpRelayAgentStorageType

The type of storage configured for this entry.

f3DhcpRelayAgentRowStatus

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …

.1.3.6.1.4.1.2544.1.12.37.1.1.1.10

The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…

CM-ENTITY-MIBneIndex f3VrfIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.2544.1.12.37.1.1.1.11

f3VrfTable

table

.1.3.6.1.4.1.2544.1.12.37.1.2 · 1 row entry · 14 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3VrfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3VrfTable'

A list of entries for the VRF user.

f3VrfEntry row .1.3.6.1.4.1.2544.1.12.37.1.2.1

A conceptual row in the f3VrfTable.

Indexes

Column Syntax OID

f3VrfIndex

The vrf number.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.2.1.1

f3VrfAlias

This object describes the vrf alias.

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.2544.1.12.37.1.2.1.2

f3VrfAdminState

This object describes the vrf admin state.

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.37.1.2.1.3

f3VrfSecondaryState

This object describes the vrf secondary state.

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.37.1.2.1.4

f3VrfOperationalState

This object describes the vrf operational state.

f3VrfAccIsolationControlEnabled

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.37.1.2.1.5

This object is used to control traffic between L3 flowpoint
on Acc port.

CM-COMMON-MIBOperationalStater/w

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.37.1.2.1.6

f3VrfPingIpv4Destination

This object allows user to specify the IP Address to which
ICMP Ping will be initiated.

f3VrfTraceRouteIpv4Destination

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.2.1.7

This object allows user to specify the IP Address to which
Trace Route will be initiated.

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.2.1.8

f3VrfAction

The Vrf action, includes fluch ARP cache, ping, trace route.

VrfActionr/w

Type Values:

0	notApplicable
1	ping
2	fluchARPCache
3	traceRoute
4	retrieveEffectiveRoutes

.1.3.6.1.4.1.2544.1.12.37.1.2.1.9

f3VrfPingResult

The Ping action result.

Type Constraints:
range: 0..2047

.1.3.6.1.4.1.2544.1.12.37.1.2.1.10

f3VrfTraceRouteResult

The trace route action result.

Type Constraints:
range: 0..2047

.1.3.6.1.4.1.2544.1.12.37.1.2.1.11

f3VrfStorageType

The type of storage configured for this entry.

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.2.1.12

f3VrfRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.2.1.13

f3VrfDhcpRoutesControl

This object is used to control dynamic routes creation based on DHCP relay agent operation.
if it is disabled, the vrf should not use host ip addresses assigned by means of DHCP relay agent
for the dynamic routes creati…

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortTypeIndex f3L3FlowPointPortIndex f3L3FlowPointIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.2.1.14

f3L3FlowPointTable

table

.1.3.6.1.4.1.2544.1.12.37.1.3 · 1 row entry · 23 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3FlowPointTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3FlowPointTable'

A list of entries for the L3 flowpoint.

f3L3FlowPointEntry row .1.3.6.1.4.1.2544.1.12.37.1.3.1

A conceptual row in the f3L3FlowPointTable.

Indexes

Column Syntax OID

f3L3FlowPointPortTypeIndex

It specifies the port type, value 1 means net port, value 2 means acc port.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.3.1.1

f3L3FlowPointPortIndex

The port number value.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.3.1.2

f3L3FlowPointIndex

The L3 flow point number.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.3.1.3

f3L3FlowPointAlias

This object describes the L3 flow point alias.

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.2544.1.12.37.1.3.1.4

f3L3FlowPointAdminState

This object describes the L3 flow point admin state.

f3L3FlowPointSecondaryState

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.37.1.3.1.5

This object describes the L3 flow point secondary state.

f3L3FlowPointOperationalState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.37.1.3.1.6

This object describes the L3 flow point operational state.

f3L3FlowPointMultiCOSEnabled

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.37.1.3.1.7

Control to enable or disable per-COS BWPs on a FlowPoint.
ENABLED:per-COS BWPs (CIR, EIR, CBS, EBS, CM, CF) are applied as a policing
function for all ingress frames of this flowpoint.
DISABLED:per-Flow BWP (C…

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.3.1.8

f3L3FlowPointCOS

Identifies the internal COS applied to all ingress frames of the flowpoint.

f3L3FlowPointUntaggedMemberShipEnabled

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.3.1.9

This attribute controls untagged frames membership for the Flowpoint.
ENABLED: Ingress untagged frame matches Flowpoint membership.
DISABLED: Ingress untagged frame does not match Flowpoint membership.

f3L3FlowPointOuterTagMemberShipEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.3.1.10

This attribute controls outer tag membership for the Flowpoint whether enabled.

f3L3FlowPointOuterTagMemberShipVlanId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.3.1.11

This attribute controls outer tag VlanId membership for the Flowpoint.

f3L3FlowPointInnerTagMemberShipEnabled

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.3.1.12

This attribute controls inner tag membership for the Flowpoint whether enabled.

f3L3FlowPointInnerTagMemberShipVlanId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.3.1.13

This attribute controls inner tag VlanId membership for the Flowpoint.

f3L3FlowPointFragmentedPktsFwdEnabled

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.3.1.14

This attribute specifies whether received IP Packets with More Fragments
flag should be forwarded by the FlowPoint.

f3L3FlowPointHCosMgmtEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.3.1.15

This attribute specifies whether the Hierarchical COS shaping enabled for this flow point.

f3L3FlowPointHCosGuaranteedBwHi

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.3.1.16

This attribute specifies the Hierarchical COS guarranteed bandwidth
high 32 bits for this flow point.

f3L3FlowPointHCosGuaranteedBwLo

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.3.1.17

This attribute specifies the Hierarchical COS guarranteed bandwidth
low 32 bits for this flow point.

f3L3FlowPointHCosMaximumBwHi

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.3.1.18

This attribute specifies the Hierarchical COS maximum bandwidth
high 32 bits for this flow point.

f3L3FlowPointHCosMaximumBwLo

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.3.1.19

This attribute specifies the Hierarchical COS maximum bandwidth
low 32 bits for this flow point.

f3L3FlowPointPolicingEnabled

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.3.1.20

This attribute allows enable or disable policers of the flow point.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.3.1.21

f3L3FlowPointStorageType

The type of storage configured for this entry.

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.3.1.22

f3L3FlowPointRowStatus

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L3AclRuleParentIndex f3L3AclRuleIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.3.1.23

f3L3AclRuleTable

table

.1.3.6.1.4.1.2544.1.12.37.1.4 · 1 row entry · 54 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3AclRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3AclRuleTable'

A list of entries for the L3 ACL rule.

f3L3AclRuleEntry row .1.3.6.1.4.1.2544.1.12.37.1.4.1

A conceptual row in the f3L3AclRuleTable.

Indexes

Column Syntax OID

f3L3AclRuleParentIndex

The ACL rule parent number, it could be flow index or L3 flow point index.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.1

f3L3AclRuleIndex

The ACL rule number.

f3L3AclRuleSrcIpv4AddressControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.2

f3L3AclRuleAlias

The ACL rule alias.

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.2544.1.12.37.1.4.1.3

The ACL rule source IPv4 Adress control whether enabled.

f3L3AclRuleDynamicSrcIpControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.4

The ACL rule dynamic source IPv4 Adress control whether enabled.

f3L3AclRuleSrcIpv4AddressLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.5

The ACL rule source IPv4 Adress low limit.

f3L3AclRuleDstIpv4AddressControl

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.4.1.6

The ACL rule Destination IPv4 Adress control whether enabled.

f3L3AclRuleDstIpv4AddressLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.7

The ACL rule Destination IPv4 Adress low limit.

f3L3AclRuleIpv4PriorityControl

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.4.1.8

The ACL rule IPv4 Priority control whether enabled.

f3L3AclRuleIpv4PriorityLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.9

The ACL rule IPv4 priority low limit.

f3L3AclRuleProtocolControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.10

The ACL rule protocol control whether enabled.

f3L3AclRuleProtocolNumber

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.11

The ACL rule protocol number.

f3L3AclRuleSrcPortControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.12

The ACL rule source port whether enabled.

f3L3AclRuleSrcPortLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.13

The ACL rule source port low limit.

f3L3AclRuleSrcPortHighLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.14

The ACL rule source port low limit.

f3L3AclRuleDstPortControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.15

The ACL rule destination port whether enabled.

f3L3AclRuleDstPortLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.16

The ACL rule destination port low limit.

f3L3AclRuleDstPortHighLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.17

The ACL rule destination port low limit.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.18

f3L3AclRulePriority

The ACL rule priority.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.19

f3L3AclRuleCOS

The ACL rule class of service.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.20

f3L3AclRuleOperation

The ACL rule action.

L3AclRuleOperationr/w

Type Values:

0	notApplicable
1	accept
2	deny

.1.3.6.1.4.1.2544.1.12.37.1.4.1.21

f3L3AclRuleSummary

The ACL rule summary.

f3L3AclRuleCosOverrideControl

Type Constraints:
range: 0..2047

.1.3.6.1.4.1.2544.1.12.37.1.4.1.22

The ACL rule COS Override control.

f3L3AclRuleSrcMacAddressControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.23

The ACL rule Source MAC address control.

f3L3AclRuleDynamicSrcMacAddressControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.24

The ACL rule dynamic Source MAC address control.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.25

f3L3AclRuleSrcMacAddress

The ACL rule dynamic Source MAC address.

f3L3AclRuleSrcMacAddressMask

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.2544.1.12.37.1.4.1.26

The ACL rule dynamic Source MAC address mask.

f3L3AclRuleDstMacAddressControl

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.4.1.27

The ACL rule dynamic Destination MAC address control.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.28

f3L3AclRuleDstMacAddress

The ACL rule dynamic Destination MAC address.

f3L3AclRuleDstMacAddressMask

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.4.1.29

The ACL rule dynamic Destination MAC address mask.

f3L3AclRuleOuterVlanVIDControl

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.4.1.30

The ACL rule outer VID control.

f3L3AclRuleOuterVlanVIDLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.31

The ACL rule outer Vlan ID low limit.

f3L3AclRuleOuterVlanVIDHighLimit

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.4.1.32

The ACL rule outer Vlan ID high limit.

f3L3AclRuleInnerVlanVIDControl

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.4.1.33

The ACL rule inner VID control.

f3L3AclRuleInnerVlanVIDLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.34

The ACL rule inner Vlan ID low limit.

f3L3AclRuleInnerVlanVIDHighLimit

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.4.1.35

The ACL rule Inner Vlan ID high limit.

f3L3AclRuleOuterVlanPcpControl

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.4.1.36

The ACL rule outer vlan PCP control.

f3L3AclRuleOuterVlanPcpLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.37

The ACL rule outer vlan PCP priority low limit.

f3L3AclRuleOuterVlanPcpHighLimit

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.4.1.38

The ACL rule outer vlan PCP priority high limit.

f3L3AclRuleInnerVlanPcpControl

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.4.1.39

The ACL rule inner vlan PCP control.

f3L3AclRuleInnerVlanPcpLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.40

The ACL rule inner vlan PCP priority low limit.

f3L3AclRuleInnerVlanPcpHighLimit

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.4.1.41

The ACL rule inner vlan PCP priority high limit.

f3L3AclRuleOuterVlanDeiControl

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.4.1.42

The ACL rule outer vlan DEI control.

f3L3AclRuleEtherTypeControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.43

f3L3AclRuleOuterVlanDei

The ACL rule outer vlan DEI.

Unsigned32r/w

Constraints:
range: 0-1

.1.3.6.1.4.1.2544.1.12.37.1.4.1.44

The ACL rule outer vlan ether type control.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.45

f3L3AclRuleEtherType

The ACL rule outer vlan ether type.

f3L3AclRuleTcpFlagsControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.46

The ACL rule outer vlan TCP flags control.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.4.1.47

f3L3AclRuleTcpFlags

The ACL rule outer vlan TCP flags.

f3L3AclRuleSrcIpv4AddressHighLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.48

The ACL rule source ipv4 adress high limit.

f3L3AclRuleDstIpv4AddressHighLimit

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.4.1.49

The ACL rule destination ipv4 adress high limit.

f3L3AclRuleIpv4PriorityHighLimit

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.4.1.50

The ACL rule ipv4 priority high limit.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.4.1.51

f3L3AclRuleStorageType

The type of storage configured for this entry.

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.4.1.52

f3L3AclRuleRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.4.1.53

f3L3AclRuleAdminState

This object allows user configure the Acl Rule in in-service or management state.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L2A2NAclRuleParentIndex f3L2A2NAclRuleIndex

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.37.1.4.1.54

f3L2A2NAclRuleTable

table

.1.3.6.1.4.1.2544.1.12.37.1.5 · 1 row entry · 54 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L2A2NAclRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L2A2NAclRuleTable'

A list of entries for the L2A2N ACL rule.

f3L2A2NAclRuleEntry row .1.3.6.1.4.1.2544.1.12.37.1.5.1

A conceptual row in the f3L2A2NAclRuleTable.

Indexes

Column Syntax OID

f3L2A2NAclRuleParentIndex

The ACL rule parent number, it could be flow index

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.1

f3L2A2NAclRuleIndex

The ACL rule number.

f3L2A2NAclRuleSrcIpv4AddressControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.2

f3L2A2NAclRuleAlias

The ACL rule alias.

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.2544.1.12.37.1.5.1.3

The ACL rule source IPv4 Adress control whether enabled.

f3L2A2NAclRuleDynamicSrcIpControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.4

The ACL rule dynamic source IPv4 Adress control whether enabled.

f3L2A2NAclRuleSrcIpv4AddressLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.5

The ACL rule source IPv4 Adress low limit.

f3L2A2NAclRuleDstIpv4AddressControl

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.5.1.6

The ACL rule Destination IPv4 Adress control whether enabled.

f3L2A2NAclRuleDstIpv4AddressLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.7

The ACL rule Destination IPv4 Adress low limit.

f3L2A2NAclRuleIpv4PriorityControl

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.5.1.8

The ACL rule IPv4 Priority control whether enabled.

f3L2A2NAclRuleIpv4PriorityLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.9

The ACL rule IPv4 priority low limit.

f3L2A2NAclRuleProtocolControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.10

The ACL rule protocol control whether enabled.

f3L2A2NAclRuleProtocolNumber

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.11

The ACL rule protocol number.

f3L2A2NAclRuleSrcPortControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.12

The ACL rule source port whether enabled.

f3L2A2NAclRuleSrcPortLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.13

The ACL rule source port low limit.

f3L2A2NAclRuleSrcPortHighLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.14

The ACL rule source port low limit.

f3L2A2NAclRuleDstPortControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.15

The ACL rule destination port whether enabled.

f3L2A2NAclRuleDstPortLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.16

The ACL rule destination port low limit.

f3L2A2NAclRuleDstPortHighLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.17

The ACL rule destination port low limit.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.18

f3L2A2NAclRulePriority

The ACL rule priority.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.19

f3L2A2NAclRuleCOS

The ACL rule class of service.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.20

f3L2A2NAclRuleOperation

The ACL rule action.

L3AclRuleOperationr/w

Type Values:

0	notApplicable
1	accept
2	deny

.1.3.6.1.4.1.2544.1.12.37.1.5.1.21

f3L2A2NAclRuleSummary

The ACL rule summary.

f3L2A2NAclRuleCosOverrideControl

Type Constraints:
range: 0..2047

.1.3.6.1.4.1.2544.1.12.37.1.5.1.22

The ACL rule COS Override control.

f3L2A2NAclRuleSrcMacAddressControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.23

The ACL rule Source MAC address control.

f3L2A2NAclRuleDynamicSrcMacAddressControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.24

The ACL rule dynamic Source MAC address control.

f3L2A2NAclRuleSrcMacAddress

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.25

The ACL rule dynamic Source MAC address.

f3L2A2NAclRuleSrcMacAddressMask

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.5.1.26

The ACL rule dynamic Source MAC address mask.

f3L2A2NAclRuleDstMacAddressControl

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.5.1.27

The ACL rule dynamic Destination MAC address control.

f3L2A2NAclRuleDstMacAddress

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.28

The ACL rule dynamic Destination MAC address.

f3L2A2NAclRuleDstMacAddressMask

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.5.1.29

The ACL rule dynamic Destination MAC address mask.

f3L2A2NAclRuleOuterVlanVIDControl

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.5.1.30

The ACL rule outer VID control.

f3L2A2NAclRuleOuterVlanVIDLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.31

The ACL rule outer Vlan ID low limit.

f3L2A2NAclRuleOuterVlanVIDHighLimit

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.5.1.32

The ACL rule outer Vlan ID high limit.

f3L2A2NAclRuleInnerVlanVIDControl

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.5.1.33

The ACL rule inner VID control.

f3L2A2NAclRuleInnerVlanVIDLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.34

The ACL rule inner Vlan ID low limit.

f3L2A2NAclRuleInnerVlanVIDHighLimit

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.5.1.35

The ACL rule Inner Vlan ID high limit.

f3L2A2NAclRuleOuterVlanPcpControl

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.5.1.36

The ACL rule outer vlan PCP control.

f3L2A2NAclRuleOuterVlanPcpLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.37

The ACL rule outer vlan PCP priority low limit.

f3L2A2NAclRuleOuterVlanPcpHighLimit

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.5.1.38

The ACL rule outer vlan PCP priority high limit.

f3L2A2NAclRuleInnerVlanPcpControl

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.5.1.39

The ACL rule inner vlan PCP control.

f3L2A2NAclRuleInnerVlanPcpLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.40

The ACL rule inner vlan PCP priority low limit.

f3L2A2NAclRuleInnerVlanPcpHighLimit

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.5.1.41

The ACL rule inner vlan PCP priority high limit.

f3L2A2NAclRuleOuterVlanDeiControl

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.5.1.42

The ACL rule outer vlan DEI control.

f3L2A2NAclRuleOuterVlanDei

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.43

The ACL rule outer vlan DEI.

Unsigned32r/w

Constraints:
range: 0-1

.1.3.6.1.4.1.2544.1.12.37.1.5.1.44

f3L2A2NAclRuleEtherTypeControl

The ACL rule outer vlan ether type control.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.45

f3L2A2NAclRuleEtherType

The ACL rule outer vlan ether type.

f3L2A2NAclRuleTcpFlagsControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.46

The ACL rule outer vlan TCP flags control.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.5.1.47

f3L2A2NAclRuleTcpFlags

The ACL rule outer vlan TCP flags.

f3L2A2NAclRuleSrcIpv4AddressHighLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.48

The ACL rule source ipv4 adress high limit.

f3L2A2NAclRuleDstIpv4AddressHighLimit

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.5.1.49

The ACL rule destination ipv4 adress high limit.

f3L2A2NAclRuleIpv4PriorityHighLimit

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.5.1.50

The ACL rule ipv4 priority high limit.

f3L2A2NAclRuleStorageType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.5.1.51

The type of storage configured for this entry.

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.5.1.52

f3L2A2NAclRuleRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.5.1.53

f3L2A2NAclRuleAdminState

This object allows user configure the Acl Rule in-service or management state.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L2N2AAclRuleParentIndex f3L2N2AAclRuleIndex

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.37.1.5.1.54

f3L2N2AAclRuleTable

table

.1.3.6.1.4.1.2544.1.12.37.1.6 · 1 row entry · 54 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L2N2AAclRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L2N2AAclRuleTable'

A list of entries for the L2N2A ACL rule.

f3L2N2AAclRuleEntry row .1.3.6.1.4.1.2544.1.12.37.1.6.1

A conceptual row in the f3L2N2AAclRuleTable.

Indexes

Column Syntax OID

f3L2N2AAclRuleParentIndex

The ACL rule parent number, it could be flow index

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.1

f3L2N2AAclRuleIndex

The ACL rule number.

f3L2N2AAclRuleSrcIpv4AddressControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.2

f3L2N2AAclRuleAlias

The ACL rule alias.

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.2544.1.12.37.1.6.1.3

The ACL rule source IPv4 Adress control whether enabled.

f3L2N2AAclRuleDynamicSrcIpControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.4

The ACL rule dynamic source IPv4 Adress control whether enabled.

f3L2N2AAclRuleSrcIpv4AddressLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.5

The ACL rule source IPv4 Adress low limit.

f3L2N2AAclRuleDstIpv4AddressControl

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.6.1.6

The ACL rule Destination IPv4 Adress control whether enabled.

f3L2N2AAclRuleDstIpv4AddressLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.7

The ACL rule Destination IPv4 Adress low limit.

f3L2N2AAclRuleIpv4PriorityControl

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.6.1.8

The ACL rule IPv4 Priority control whether enabled.

f3L2N2AAclRuleIpv4PriorityLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.9

The ACL rule IPv4 priority low limit.

f3L2N2AAclRuleProtocolControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.10

The ACL rule protocol control whether enabled.

f3L2N2AAclRuleProtocolNumber

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.11

The ACL rule protocol number.

f3L2N2AAclRuleSrcPortControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.12

The ACL rule source port whether enabled.

f3L2N2AAclRuleSrcPortLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.13

The ACL rule source port low limit.

f3L2N2AAclRuleSrcPortHighLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.14

The ACL rule source port low limit.

f3L2N2AAclRuleDstPortControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.15

The ACL rule destination port whether enabled.

f3L2N2AAclRuleDstPortLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.16

The ACL rule destination port low limit.

f3L2N2AAclRuleDstPortHighLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.17

The ACL rule destination port low limit.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.18

f3L2N2AAclRulePriority

The ACL rule priority.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.19

f3L2N2AAclRuleCOS

The ACL rule class of service.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.20

f3L2N2AAclRuleOperation

The ACL rule action.

L3AclRuleOperationr/w

Type Values:

0	notApplicable
1	accept
2	deny

.1.3.6.1.4.1.2544.1.12.37.1.6.1.21

f3L2N2AAclRuleSummary

The ACL rule summary.

f3L2N2AAclRuleCosOverrideControl

Type Constraints:
range: 0..2047

.1.3.6.1.4.1.2544.1.12.37.1.6.1.22

The ACL rule COS Override control.

f3L2N2AAclRuleSrcMacAddressControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.23

The ACL rule Source MAC address control.

f3L2N2AAclRuleDynamicSrcMacAddressControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.24

The ACL rule dynamic Source MAC address control.

f3L2N2AAclRuleSrcMacAddress

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.25

The ACL rule dynamic Source MAC address.

f3L2N2AAclRuleSrcMacAddressMask

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.6.1.26

The ACL rule dynamic Source MAC address mask.

f3L2N2AAclRuleDstMacAddressControl

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.6.1.27

The ACL rule dynamic Destination MAC address control.

f3L2N2AAclRuleDstMacAddress

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.28

The ACL rule dynamic Destination MAC address.

f3L2N2AAclRuleDstMacAddressMask

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.6.1.29

The ACL rule dynamic Destination MAC address mask.

f3L2N2AAclRuleOuterVlanVIDControl

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.6.1.30

The ACL rule outer VID control.

f3L2N2AAclRuleOuterVlanVIDLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.31

The ACL rule outer Vlan ID low limit.

f3L2N2AAclRuleOuterVlanVIDHighLimit

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.6.1.32

The ACL rule outer Vlan ID high limit.

f3L2N2AAclRuleInnerVlanVIDControl

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.6.1.33

The ACL rule inner VID control.

f3L2N2AAclRuleInnerVlanVIDLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.34

The ACL rule inner Vlan ID low limit.

f3L2N2AAclRuleInnerVlanVIDHighLimit

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.6.1.35

The ACL rule Inner Vlan ID high limit.

f3L2N2AAclRuleOuterVlanPcpControl

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.37.1.6.1.36

The ACL rule outer vlan PCP control.

f3L2N2AAclRuleOuterVlanPcpLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.37

The ACL rule outer vlan PCP priority low limit.

f3L2N2AAclRuleOuterVlanPcpHighLimit

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.6.1.38

The ACL rule outer vlan PCP priority high limit.

f3L2N2AAclRuleInnerVlanPcpControl

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.6.1.39

The ACL rule inner vlan PCP control.

f3L2N2AAclRuleInnerVlanPcpLowLimit

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.40

The ACL rule inner vlan PCP priority low limit.

f3L2N2AAclRuleInnerVlanPcpHighLimit

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.6.1.41

The ACL rule inner vlan PCP priority high limit.

f3L2N2AAclRuleOuterVlanDeiControl

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.37.1.6.1.42

The ACL rule outer vlan DEI control.

f3L2N2AAclRuleOuterVlanDei

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.43

The ACL rule outer vlan DEI.

Unsigned32r/w

Constraints:
range: 0-1

.1.3.6.1.4.1.2544.1.12.37.1.6.1.44

f3L2N2AAclRuleEtherTypeControl

The ACL rule outer vlan ether type control.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.45

f3L2N2AAclRuleEtherType

The ACL rule outer vlan ether type.

f3L2N2AAclRuleTcpFlagsControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.46

The ACL rule outer vlan TCP flags control.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.6.1.47

f3L2N2AAclRuleTcpFlags

The ACL rule outer vlan TCP flags.

f3L2N2AAclRuleSrcIpv4AddressHighLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.48

The ACL rule source ipv4 adress high limit.

f3L2N2AAclRuleDstIpv4AddressHighLimit

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.6.1.49

The ACL rule destination ipv4 adress high limit.

f3L2N2AAclRuleIpv4PriorityHighLimit

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.6.1.50

The ACL rule ipv4 priority high limit.

f3L2N2AAclRuleStorageType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.6.1.51

The type of storage configured for this entry.

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.6.1.52

f3L2N2AAclRuleRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.6.1.53

f3L2N2AAclRuleAdminState

This object allows user configure the Acl Rule in-service or management state.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortTypeIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3QosPolicerIndex

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.37.1.6.1.54

f3L3QosPolicerTable

table

.1.3.6.1.4.1.2544.1.12.37.1.7 · 1 row entry · 15 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3QosPolicerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3QosPolicerTable'

A list of entries corresponding to Ethernet Quality of Service 
Policer for configuration purposes.

f3L3QosPolicerEntry row .1.3.6.1.4.1.2544.1.12.37.1.7.1

A conceptual row in the f3L3QosPolicerTable.
These entries represent a Quality of Service Policer.

Indexes

Column Syntax OID

f3L3QosPolicerIndex

The Policer Index that represents the COS level. This
is applicable in case of a Multi COS flow. Index 1
represents COS 0; Index 2 represents COS 1 and so on.

In release 5.6CC the range is extended to 1…

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.2544.1.12.37.1.7.1.1

f3L3QosPolicerAdminState

This object represents the Administrative State of
the QOS Flow Policer.

f3L3QosPolicerOperationalState

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.37.1.7.1.2

This object represents the Operational State of the QOS Flow Policer.

f3L3QosPolicerSecondaryState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.37.1.7.1.3

This object represents the Secondary State of the QOS Flow Policer.

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.37.1.7.1.4

f3L3QosPolicerCIRLo

This object allows specification of the Commited Information
Rate(CIR) on Policer. This represents the lower 32 bits of the
CIR.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.7.1.5

f3L3QosPolicerCIRHi

This object allows specification of the Commited Information
Rate(CIR) on Policer. This represents the upper 32 bits of the
CIR.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.7.1.6

f3L3QosPolicerEIRLo

This object allows specification of the Excess Information
Rate(EIR) on the Policer. This represents the lower 32 bits
of the EIR.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.7.1.7

f3L3QosPolicerEIRHi

This object allows specification of the Excess Information
Rate(EIR) on the Policer. This represents the upper 32 bits
of the EIR.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.7.1.8

f3L3QosPolicerCBS

This object allows specification of the Commited Burst Size
(CBS) on Policer.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.7.1.9

f3L3QosPolicerEBS

This object allows specification of the Excess Burst Size
(EBS) on the Policer.

CM-FACILITY-MIBPolicerAlgorithmType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.7.1.10

f3L3QosPolicerAlgorithm

This object allows specification of Policer algorithm as
'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate
Triple Color Marking).

Type Values:

1	srTCM
2	trTCM

.1.3.6.1.4.1.2544.1.12.37.1.7.1.11

f3L3QosPolicerColorMode

This object allows specification of Policer Color Mode as
'color-aware' or 'color-blind'.

CM-FACILITY-MIBPolicerColorModer/w

Type Values:

1	color-aware
2	color-blind

.1.3.6.1.4.1.2544.1.12.37.1.7.1.12

f3L3QosPolicerCouplingFlag

This object allows specification of Policer Coupling Flag.
When coupling is enabled, tokens that would normally be
added to the C-bucket are passed to the E-bucket only once the CIR
bucket has reached its CBS level. Th…

f3L3QosPolicerStorageType

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.7.1.13

The type of storage configured for this entry.

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.7.1.14

f3L3QosPolicerRowStatus

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortTypeIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3QosShaperIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.7.1.15

f3L3QosShaperTable

table

.1.3.6.1.4.1.2544.1.12.37.1.8 · 1 row entry · 18 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3QosShaperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3QosShaperTable'

A list of entries corresponding to Ethernet Access Port 
Quality of Service Shaper for configuration purposes.
These shapers can be managed when the Access Port is
in evpl mode and are relevant for traffic in the
network to access direction.

f3L3QosShaperEntry row .1.3.6.1.4.1.2544.1.12.37.1.8.1

A conceptual row in the f3L3QosShaperTable.
These entries represent a Quality of Service Shaper.

Indexes

Column Syntax OID

f3L3QosShaperIndex

The unique integer index value corresponding to a
Quality of Service Shaper.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.2544.1.12.37.1.8.1.1

f3L3QosShaperAdminState

This object represents the Administrative State of
the QOS Shaper.

f3L3QosShaperOperationalState

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.37.1.8.1.2

This object represents the Operational State of the QOS Shaper.

f3L3QosShaperSecondaryState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.37.1.8.1.3

This object represents the Secondary State of the QOS Shaper.

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.37.1.8.1.4

f3L3QosShaperCIRLo

This object represents the Commited Information
Rate(CIR) (Lower 32 bits)of a Shaper.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.5

f3L3QosShaperCIRHi

This object represents the Commited Information
Rate(CIR) (Higher 32 bits) of a Shaper.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.6

f3L3QosShaperEIRLo

This object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.7

f3L3QosShaperEIRHi

This object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.8

f3L3QosShaperBufferSize

This object represents the Buffer Size of the Shaper.

f3L3QosShaperWredGreenMinQueueThreshold

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.9

f3L3QosShaperCOS

This object provides the COS (Class of Service)
value for the QOS Shaper.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.2544.1.12.37.1.8.1.10

This object represents the Wred green packet min queue threshold value.

f3L3QosShaperWredGreenMaxQueueThreshold

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.11

This object represents the Wred green packet max queue threshold value.

f3L3QosShaperWredGreenDropProbability

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.12

This object represents the Wred green packet drop probability.

f3L3QosShaperWredYellowMinQueueThreshold

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.13

This object represents the Wred yellow packet min queue threshold value.

f3L3QosShaperWredYellowMaxQueueThreshold

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.14

This object represents the Wred yellow packet max queue threshold value.

f3L3QosShaperWredYellowDropProbability

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.15

This object represents the Wred yellow packet drop probability.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.1.8.1.16

f3L3QosShaperStorageType

The type of storage configured for this entry.

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.8.1.17

f3L3QosShaperRowStatus

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3TrafficIPIfIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.8.1.18

f3L3TrafficIPInterfaceTable

table

.1.3.6.1.4.1.2544.1.12.37.1.9 · 1 row entry · 31 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3TrafficIPInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3TrafficIPInterfaceTable'

A list of entries for the L3 Traffic IP Interface.

f3L3TrafficIPInterfaceEntry row .1.3.6.1.4.1.2544.1.12.37.1.9.1

A conceptual row in the f3L3TrafficIPInterfaceTable.

Indexes

Column Syntax OID

f3L3TrafficIPIfIndex

It specifies the traffic IP interface number.

f3L3TrafficIPIfAdminState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.9.1.1

f3L3TrafficIPIfName

It specifies the traffic IP interface name.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2544.1.12.37.1.9.1.2

This object represents the Administrative State of the interface.

f3L3TrafficIPIfSecondaryState

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.37.1.9.1.3

This object represents the Secondary State of the interface.

f3L3TrafficIPIfOperationalState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.37.1.9.1.4

This object represents the Operational State of the interface.

f3L3TrafficIPIfProxyArpEnabled

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.37.1.9.1.5

This attribute controls poxy ARP on this interface.

f3L3TrafficIPIfIpAddressSourceType

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.9.1.6

This attribute represents the IP address source type.

IfIpAddressSourceTyper/w

Type Values:

1	dhcp
2	static

.1.3.6.1.4.1.2544.1.12.37.1.9.1.7

f3L3TrafficIPIfMgmtUseEnable

This attribute is used for controlling use of interface for management.
If enabled the NE can be managed through this interface.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.9.1.8

f3L3TrafficIPIfIpAddress

IP Address of the interface.

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.9.1.9

f3L3TrafficIPIfMask

IP Address mask of the interface.

f3L3TrafficIPIfDhcpRelayInterfaceSide

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.9.1.10

This object represents interface side.

DhcpRelayInterfaceSider/w

Type Values:

1	client
2	server

.1.3.6.1.4.1.2544.1.12.37.1.9.1.11

f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60

DHCP Option 60 value used for association of received
DHCP message with Traffic IP Interface .

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2544.1.12.37.1.9.1.12

f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60Control

This Attribute is used to control inspection of
DHCP option 60 presence in the DHCP messages received
on Client Side Traffic IP Interface.

f3L3TrafficIPIfDhcpRelayUserClassOpt77

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.9.1.13

DHCP Option 77 value used for association of received
DHCP message with Traffic IP Interface .

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2544.1.12.37.1.9.1.14

f3L3TrafficIPIfDhcpRelayUserClassOpt77Control

This Attribute is used to control inspection of
DHCP option 77 presence in the DHCP messages received
on Client Side Traffic IP Interface.

f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.9.1.15

DHCP Option 82 sub option 1 value.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2544.1.12.37.1.9.1.16

f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1Enabled

This Attribute is used to control inspection of
DHCP option 82 sub option 1 presence in the DHCP messages received
on Client Side Traffic IP Interface.

f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.9.1.17

DHCP Option 82 sub option 2 value.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2544.1.12.37.1.9.1.18

f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2Enabled

This Attribute is used to control inspection of
DHCP option 82 sub option 2 presence in the DHCP messages received
on Client Side Traffic IP Interface.

f3L3TrafficIPIfDhcpEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.9.1.19

Whether or not DHCP is enabled on this interface.

f3L3TrafficIPIfDhcpClientIdEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.9.1.20

f3L3TrafficIPIfDhcpRole

Specify the DHCP role on this interface.

CM-IP-MIBCmDhcpRole

Type Values:

1	dhcp-client
2	dhcp-server

.1.3.6.1.4.1.2544.1.12.37.1.9.1.21

Whether or not DHCP client id enabled.

f3L3TrafficIPIfDhcpClientId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.9.1.22

Specify the DHCP Cliend ID value.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.37.1.9.1.23

f3L3TrafficIPIfDhcpClassIdEnabled

Whether or not DHCP class id enabled.

f3L3TrafficIPIfDhcpHostNameEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.9.1.24

Whether or not DHCP host name enabled.

f3L3TrafficIPIfDhcpHostName

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.9.1.25

DHCP host name value.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.37.1.9.1.26

f3L3TrafficIPIfDhcpClientIdType

This object describe whether the dhcp cid type.

CM-IP-MIBDHCPCIDTyper/w

Type Values:

1	notApplicable
2	sysName
3	macAddr
4	userDefined
5	serialNumber

.1.3.6.1.4.1.2544.1.12.37.1.9.1.27

f3L3TrafficIPIfDhcpHostNameType

This object describe whether the dhcp host name type.

CM-IP-MIBDHCPHostNameTyper/w

Type Values:

1	notApplicable
2	sysName
3	userDefined

.1.3.6.1.4.1.2544.1.12.37.1.9.1.28

f3L3TrafficIPIfStorageType

The type of storage configured for this entry.

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.9.1.29

f3L3TrafficIPIfRowStatus

CM-ENTITY-MIBneIndex f3DhcpRelayAgentIndex f3DhcpRelayAgentTrafficIpIfMemberObject

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.9.1.30

f3L3TrafficIPIfAction

This objects describes action set on this traffic ip interface.

AffectiveArpActionTyper/w

Type Values:

0	notApplicable
1	retrieveAffectiveArp

.1.3.6.1.4.1.2544.1.12.37.1.9.1.31

f3DhcpRelayAgentTrafficIpIfMemberTable

table

.1.3.6.1.4.1.2544.1.12.37.1.10 · 1 row entry · 3 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3DhcpRelayAgentTrafficIpIfMemberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3DhcpRelayAgentTrafficIpIfMemberTable'

A list of entries for the Dhcp Relay Agent Traffic Ip Interface member.

f3DhcpRelayAgentTrafficIpIfMemberEntry row .1.3.6.1.4.1.2544.1.12.37.1.10.1

A conceptual row in the f3DhcpRelayAgentTrafficIpIfMemberTable.

Indexes

Column Syntax OID

f3DhcpRelayAgentTrafficIpIfMemberObject

This object describes the traffic ip interface.

f3DhcpRelayAgentTrafficIpIfMemberStorageType

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.37.1.10.1.1

The type of storage configured for this entry.

f3DhcpRelayAgentTrafficIpIfMemberRowStatus

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.10.1.2

CM-ENTITY-MIBneIndex f3VrfIndex f3VrfTrafficIpIfMemberObject

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.10.1.3

f3VrfTrafficIpIfMemberTable

table

.1.3.6.1.4.1.2544.1.12.37.1.11 · 1 row entry · 3 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3VrfTrafficIpIfMemberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3VrfTrafficIpIfMemberTable'

A list of entries for the Vrf Traffic Ip Interface member.

f3VrfTrafficIpIfMemberEntry row .1.3.6.1.4.1.2544.1.12.37.1.11.1

A conceptual row in the f3DhcpRelayAgentTrafficIpIfMemberTable.

Indexes

Column Syntax OID

f3VrfTrafficIpIfMemberObject

This object describes the traffic ip interface.

f3VrfTrafficIpIfMemberStorageType

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.37.1.11.1.1

The type of storage configured for this entry.

f3VrfTrafficIpIfMemberRowStatus

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.11.1.2

CM-ENTITY-MIBneIndex f3VrfIndex f3L3TrafficIpv4RouteDest f3L3TrafficIpv4RouteMask f3L3TrafficIpv4RouteNextHop f3L3TrafficIpv4RouteInterface

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.11.1.3

f3L3TrafficIpv4RouteTable

table

.1.3.6.1.4.1.2544.1.12.37.1.12 · 1 row entry · 12 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3TrafficIpv4RouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3TrafficIpv4RouteTable'

A list of entries for the L3 Traffic Ipv4 route.
Must set f3VrfAction as retrieveEffectiveRoutes(4) before get data from this table.

f3L3TrafficIpv4RouteEntry row .1.3.6.1.4.1.2544.1.12.37.1.12.1

A conceptual row in the f3L3TrafficIpv4RouteTable.

Indexes

Column Syntax OID

f3L3TrafficIpv4RouteDest

It specifies the traffic Ipv4 route destination.

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.12.1.1

f3L3TrafficIpv4RouteMask

It specifies the traffic Ipv4 route mask.

f3L3TrafficIpv4RouteNextHop

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.12.1.2

It specifies the traffic Ipv4 route next hop.

f3L3TrafficIpv4RouteMetric

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.12.1.3

It specifies the traffic Ipv4 route metric.

f3L3TrafficIpv4RouteInterface

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.37.1.12.1.4

It specifies the traffic Ipv4 route interface.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.37.1.12.1.5

f3L3TrafficIpv4RouteAdvertise

It specifies the traffic Ipv4 route advertise.

f3L3TrafficIpv4RouteStatus

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.12.1.6

It specifies the traffic Ipv4 route status.

TrafficIpRouteStatus

Type Values:

1	active
2	nexthopUnresovled
3	interfaceOutage
4	noResources
5	standby

.1.3.6.1.4.1.2544.1.12.37.1.12.1.7

f3L3TrafficIpv4RouteSourceForwardingEnable

It specifies the traffic Ipv4 route source forwarding whether enabled.

f3L3TrafficIpv4RouteFlags

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.1.12.1.8

It specifies the traffic Ipv4 route flags.

RouteFlags

Type Values:

0	dDynamic
1	gUseGW
2	hFullMask
3	mModifiedByIcmp
4	oOutage
5	uNormal

.1.3.6.1.4.1.2544.1.12.37.1.12.1.9

f3L3TrafficIpv4RouteStorageType

The type of storage configured for this entry.

f3L3TrafficIpv4RouteRowStatus

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.12.1.10

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3TrafficIPIfIndex f3L3TrafficArpIPAddress

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.12.1.11

f3L3TrafficIpv4RouteType

It specifies the route is dynamic or static.

CM-IP-MIBIpEntryType

Type Values:

1	static
2	dynamic

.1.3.6.1.4.1.2544.1.12.37.1.12.1.12

f3L3TrafficArpTable

table

.1.3.6.1.4.1.2544.1.12.37.1.13 · 1 row entry · 6 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3TrafficArpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3TrafficArpTable'

A list of Traffic ARP entries on the NIDs.
Must set f3L3TrafficIPIfAction as retrieveAffectiveArp (1) before get data from this table.

f3L3TrafficArpEntry row .1.3.6.1.4.1.2544.1.12.37.1.13.1

A conceptual row in the f3L3TrafficArpTable. Entries can
be created/deleted in this table by management application action.

Indexes

Column Syntax OID

f3L3TrafficArpIPAddress

This object allows configuration of the ARP Entry IP Address.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.37.1.13.1.1

f3L3TrafficArpMacAddress

This object allows management of the ARP Entry MAC Address.

f3L3TrafficArpStorageType

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.37.1.13.1.2

f3L3TrafficArpInterface

This object allows management of the ARP Entry Interface.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.37.1.13.1.3

f3L3TrafficArpEntryType

The type of ARP Entry. Note that static entries can be created.

CM-IP-MIBIpEntryTyper/w

Type Values:

1	static
2	dynamic

.1.3.6.1.4.1.2544.1.12.37.1.13.1.4

The type of storage configured for this entry.

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.37.1.13.1.5

f3L3TrafficArpRowStatus

The status of this row.
The f3L3TrafficArpRowStatus object may be modified if
the associated instance of this object is equal to active(1),
notInService(2), or notReady(3).

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortTypeIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3FlowPointStatsIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.37.1.13.1.6

f3L3FlowPointStatsTable

table

.1.3.6.1.4.1.2544.1.12.37.2.1 · 1 row entry · 14 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3FlowPointStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3FlowPointStatsTable'

A collection of L3 Flow Point related statistics.  
These reflect the current data.

f3L3FlowPointStatsEntry row .1.3.6.1.4.1.2544.1.12.37.2.1.1

A conceptual row in the f3L3FlowPointStatsTable.
Entries exist in this table for each L3 flow point.

Indexes

Column Syntax OID

f3L3FlowPointStatsIndex

An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.37.2.1.1.1

f3L3FlowPointStatsIntervalType

Interval over which Performance Monitoring data is collected.

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.1.1.2

f3L3FlowPointStatsValid

Indicates the validity of the bin.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.1.1.3

f3L3FlowPointStatsAction

Allows the Manager to clear the bin.

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.1.1.4

f3L3FlowPointStatsFMG

The number of Frames Marked Green.

.1.3.6.1.4.1.2544.1.12.37.2.1.1.5

f3L3FlowPointStatsFMY

The number of Frames Marked Yellow.

.1.3.6.1.4.1.2544.1.12.37.2.1.1.6

f3L3FlowPointStatsFMRD

The number of Frames Marked Red and Discarded.

.1.3.6.1.4.1.2544.1.12.37.2.1.1.7

f3L3FlowPointStatsFTD

The number of Frames Tail Dropped.

f3L3FlowPointStatsFragmentedDropAcl

.1.3.6.1.4.1.2544.1.12.37.2.1.1.8

The number of dropped fragmented packets.

f3L3FlowPointStatsAclRuleDrop

.1.3.6.1.4.1.2544.1.12.37.2.1.1.9

The number of dropped packets due to ACL rule.

f3L3FlowPointStatsTtlEqual1Drop

.1.3.6.1.4.1.2544.1.12.37.2.1.1.10

the number of dropped packets due to ttl's value is 1.

f3L3FlowPointStatsFrameTx

.1.3.6.1.4.1.2544.1.12.37.2.1.1.11

The number of total transmitted frames.

f3L3FlowPointStatsFrameRx

.1.3.6.1.4.1.2544.1.12.37.2.1.1.12

The number of total received frames.

f3L3FlowPointStatsNoRouteDrop

.1.3.6.1.4.1.2544.1.12.37.2.1.1.13

The number of frames drop due to no route.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortTypeIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3FlowPointStatsIndex f3L3FlowPointHistoryIndex

.1.3.6.1.4.1.2544.1.12.37.2.1.1.14

f3L3FlowPointHistoryTable

table

.1.3.6.1.4.1.2544.1.12.37.2.2 · 1 row entry · 14 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3FlowPointHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3FlowPointHistoryTable'

A collection of L3 Flow Point related statistics.  
These reflect the current data.

f3L3FlowPointHistoryEntry row .1.3.6.1.4.1.2544.1.12.37.2.2.1

A conceptual row in the f3L3FlowPointHistoryTable.
Entries exist in this table for each L3 flow point.

Indexes

Column Syntax OID

f3L3FlowPointHistoryIndex

An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.37.2.2.1.1

f3L3FlowPointHistoryTime

Indicates the time of history bin creation.

f3L3FlowPointHistoryValid

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.37.2.2.1.2

Indicates the validity of the bin.

f3L3FlowPointHistoryAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.2.1.3

Allows the Manager to clear the bin.

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.2.1.4

f3L3FlowPointHistoryFMG

The number of Frames Marked Green.

.1.3.6.1.4.1.2544.1.12.37.2.2.1.5

f3L3FlowPointHistoryFMY

The number of Frames Marked Yellow.

.1.3.6.1.4.1.2544.1.12.37.2.2.1.6

f3L3FlowPointHistoryFMRD

The number of Frames Marked Red and Discarded.

.1.3.6.1.4.1.2544.1.12.37.2.2.1.7

f3L3FlowPointHistoryFTD

The number of Frames Tail Dropped.

f3L3FlowPointHistoryFragmentedDropAcl

.1.3.6.1.4.1.2544.1.12.37.2.2.1.8

The number of dropped fragmented packets.

f3L3FlowPointHistoryAclRuleDrop

.1.3.6.1.4.1.2544.1.12.37.2.2.1.9

The number of dropped packets due to ACL rule.

f3L3FlowPointHistoryTtlEqual1Drop

.1.3.6.1.4.1.2544.1.12.37.2.2.1.10

the number of dropped packets due to ttl's value is 1.

f3L3FlowPointHistoryFrameTx

.1.3.6.1.4.1.2544.1.12.37.2.2.1.11

The number of total transmitted frames.

f3L3FlowPointHistoryFrameRx

.1.3.6.1.4.1.2544.1.12.37.2.2.1.12

the number of total recieved frames.

f3L3FlowPointHistoryNoRouteDrop

.1.3.6.1.4.1.2544.1.12.37.2.2.1.13

the number of frames dropped due to no route.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortTypeIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3FlowPointStatsIndex f3L3FlowPointThresholdIndex

.1.3.6.1.4.1.2544.1.12.37.2.2.1.14

f3L3FlowPointThresholdTable

table

.1.3.6.1.4.1.2544.1.12.37.2.3 · 1 row entry · 6 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3FlowPointThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3FlowPointThresholdTable'

A table of entries that allow manageability of L3 Flow Point Thresholds.

f3L3FlowPointThresholdEntry row .1.3.6.1.4.1.2544.1.12.37.2.3.1

A conceptual row in the f3L3FlowPointThresholdTable.

Indexes

Column Syntax OID

f3L3FlowPointThresholdIndex

An index that uniquely identifies an entry in the
f3L3FlowPointThresholdTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.3.1.1

f3L3FlowPointThresholdInterval

The interval over which monitored value is
sampled and compared with the specified threshold.

f3L3FlowPointThresholdVariable

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.3.1.2

The object identifier of the particular variable to be
sampled.

f3L3FlowPointThresholdValueLo

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.37.2.3.1.3

Lower 32 bits of the threshold value.

f3L3FlowPointThresholdValueHi

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.3.1.4

Higher 32 bits of the threshold value.

f3L3FlowPointThresholdMonValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.3.1.5

Monitored value corresponding to f3L3FlowPointThresholdVariable.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3TrafficIPIfIndex f3L3TrafficIpInterfaceStatsIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2544.1.12.37.2.3.1.6

f3L3TrafficIpInterfaceStatsTable

table

.1.3.6.1.4.1.2544.1.12.37.2.4 · 1 row entry · 12 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3TrafficIpInterfaceStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3TrafficIpInterfaceStatsTable'

A collection of L3 traffic ip interface related statistics.  
These reflect the current data.

f3L3TrafficIpInterfaceStatsEntry row .1.3.6.1.4.1.2544.1.12.37.2.4.1

A conceptual row in the f3L3TrafficIpInterfaceStatsTable.
Entries exist in this table for each L3 traffic ip interface.

Indexes

Column Syntax OID

f3L3TrafficIpInterfaceStatsIndex

An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.37.2.4.1.1

f3L3TrafficIpInterfaceStatsIntervalType

Interval over which Performance Monitoring data is collected.

f3L3TrafficIpInterfaceStatsValid

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.4.1.2

Indicates the validity of the bin.

f3L3TrafficIpInterfaceStatsAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.4.1.3

Allows the Manager to clear the bin.

f3L3TrafficIpInterfaceStatsDhcpTx

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.4.1.4

The number of packets DHCP Transmit.

f3L3TrafficIpInterfaceStatsDhcpRx

.1.3.6.1.4.1.2544.1.12.37.2.4.1.5

The number of packets DHCP Recieved.

f3L3TrafficIpInterfaceStatsIcmpTx

.1.3.6.1.4.1.2544.1.12.37.2.4.1.6

The number of packets Icmp protocol transmit.

f3L3TrafficIpInterfaceStatsIcmpRx

.1.3.6.1.4.1.2544.1.12.37.2.4.1.7

The number of packets Icmp protocol recieved.

f3L3TrafficIpInterfaceStatsArpReqTx

.1.3.6.1.4.1.2544.1.12.37.2.4.1.8

The number of transmit packets due to ARP request.

f3L3TrafficIpInterfaceStatsArpReqRx

.1.3.6.1.4.1.2544.1.12.37.2.4.1.9

the number of recieved packets due to ARP request.

f3L3TrafficIpInterfaceStatsArpReplyTx

.1.3.6.1.4.1.2544.1.12.37.2.4.1.10

The number of transmit packets due to ARP reply.

f3L3TrafficIpInterfaceStatsArpReplyRx

.1.3.6.1.4.1.2544.1.12.37.2.4.1.11

the number of recieved packets due to ARP reply.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3TrafficIPIfIndex f3L3TrafficIpInterfaceStatsIndex f3L3TrafficIpInterfaceHistoryIndex

.1.3.6.1.4.1.2544.1.12.37.2.4.1.12

f3L3TrafficIpInterfaceHistoryTable

table

.1.3.6.1.4.1.2544.1.12.37.2.5 · 1 row entry · 12 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3TrafficIpInterfaceHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3TrafficIpInterfaceHistoryTable'

A collection of L3 traffic ip interface related history statistics.  
These reflect the history data.

f3L3TrafficIpInterfaceHistoryEntry row .1.3.6.1.4.1.2544.1.12.37.2.5.1

A conceptual row in the f3L3TrafficIpInterfaceHistoryTable.
Entries exist in this table for each L3 traffic ip interface.

Indexes

Column Syntax OID

f3L3TrafficIpInterfaceHistoryIndex

An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.37.2.5.1.1

f3L3TrafficIpInterfaceHistoryTime

Indicates the time of history bin creation.

f3L3TrafficIpInterfaceHistoryValid

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.37.2.5.1.2

Indicates the validity of the bin.

f3L3TrafficIpInterfaceHistoryAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.5.1.3

Allows the Manager to clear the bin.

f3L3TrafficIpInterfaceHistoryDhcpTx

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.5.1.4

The number of packets DHCP Transmit.

f3L3TrafficIpInterfaceHistoryDhcpRx

.1.3.6.1.4.1.2544.1.12.37.2.5.1.5

The number of packets DHCP Recieved.

f3L3TrafficIpInterfaceHistoryIcmpTx

.1.3.6.1.4.1.2544.1.12.37.2.5.1.6

The number of packets Icmp protocol transmit.

f3L3TrafficIpInterfaceHistoryIcmpRx

.1.3.6.1.4.1.2544.1.12.37.2.5.1.7

The number of packets Icmp protocol recieved.

f3L3TrafficIpInterfaceHistoryArpReqTx

.1.3.6.1.4.1.2544.1.12.37.2.5.1.8

The number of transmit packets due to ARP request.

f3L3TrafficIpInterfaceHistoryArpReqRx

.1.3.6.1.4.1.2544.1.12.37.2.5.1.9

the number of recieved packets due to ARP request.

f3L3TrafficIpInterfaceHistoryArpReplyTx

.1.3.6.1.4.1.2544.1.12.37.2.5.1.10

The number of transmit packets due to ARP reply.

f3L3TrafficIpInterfaceHistoryArpReplyRx

.1.3.6.1.4.1.2544.1.12.37.2.5.1.11

the number of recieved packets due to ARP reply.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3TrafficIPIfIndex f3L3TrafficIpInterfaceStatsIndex f3L3TrafficIpInterfaceThresholdIndex

.1.3.6.1.4.1.2544.1.12.37.2.5.1.12

f3L3TrafficIpInterfaceThresholdTable

table

.1.3.6.1.4.1.2544.1.12.37.2.6 · 1 row entry · 6 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3TrafficIpInterfaceThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3TrafficIpInterfaceThresholdTable'

A table of entries that allow manageability of L3 traffic ip interface Thresholds.

f3L3TrafficIpInterfaceThresholdEntry row .1.3.6.1.4.1.2544.1.12.37.2.6.1

A conceptual row in the f3L3TrafficIpInterfaceThresholdTable.

Indexes

Column Syntax OID

f3L3TrafficIpInterfaceThresholdIndex

An index that uniquely identifies an entry in the
f3L3TrafficIpInterfaceThresholdTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.6.1.1

f3L3TrafficIpInterfaceThresholdInterval

The interval over which monitored value is
sampled and compared with the specified threshold.

f3L3TrafficIpInterfaceThresholdVariable

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.6.1.2

The object identifier of the particular variable to be
sampled.

f3L3TrafficIpInterfaceThresholdValueLo

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.37.2.6.1.3

Lower 32 bits of the threshold value.

f3L3TrafficIpInterfaceThresholdValueHi

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.6.1.4

Higher 32 bits of the threshold value.

f3L3TrafficIpInterfaceThresholdMonValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.6.1.5

Monitored value corresponding to f3L3TrafficIpInterfaceThresholdVariable.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L3AclRuleParentIndex f3L3AclRuleIndex f3L3AclRuleStatsIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2544.1.12.37.2.6.1.6

f3L3AclRuleStatsTable

table

.1.3.6.1.4.1.2544.1.12.37.2.7 · 1 row entry · 5 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3AclRuleStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3AclRuleStatsTable'

A collection of L3 acl rule related statistics.  
These reflect the current data.

f3L3AclRuleStatsEntry row .1.3.6.1.4.1.2544.1.12.37.2.7.1

A conceptual row in the f3L3AclRuleStatsTable.
Entries exist in this table for each Acl rule.

Indexes

Column Syntax OID

f3L3AclRuleStatsIndex

An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.37.2.7.1.1

f3L3AclRuleStatsIntervalType

Interval over which Performance Monitoring data is collected.

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.7.1.2

f3L3AclRuleStatsValid

Indicates the validity of the bin.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.7.1.3

f3L3AclRuleStatsAction

Allows the Manager to clear the bin.

f3L3AclRuleStatsRuleMatch

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.7.1.4

The number of packets matching the ACL rule.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L3AclRuleParentIndex f3L3AclRuleIndex f3L3AclRuleStatsIndex f3L3AclRuleHistoryIndex

.1.3.6.1.4.1.2544.1.12.37.2.7.1.5

f3L3AclRuleHistoryTable

table

.1.3.6.1.4.1.2544.1.12.37.2.8 · 1 row entry · 5 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3AclRuleHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3AclRuleHistoryTable'

A collection of L3 acl rule related history statistics.  
These reflect the history data.

f3L3AclRuleHistoryEntry row .1.3.6.1.4.1.2544.1.12.37.2.8.1

A conceptual row in the f3L3AclRuleHistoryTable.
Entries exist in this table for each L3 acl rule.

Indexes

Column Syntax OID

f3L3AclRuleHistoryIndex

An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.37.2.8.1.1

f3L3AclRuleHistoryTime

Indicates the time of history bin creation.

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.37.2.8.1.2

f3L3AclRuleHistoryValid

Indicates the validity of the bin.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.8.1.3

f3L3AclRuleHistoryAction

Allows the Manager to clear the bin.

f3L3AclRuleHistoryRuleMatch

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.8.1.4

The number of packets matching acl rule.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L3AclRuleParentIndex f3L3AclRuleIndex f3L3AclRuleStatsIndex f3L3AclRuleThresholdIndex

.1.3.6.1.4.1.2544.1.12.37.2.8.1.5

f3L3AclRuleThresholdTable

table

.1.3.6.1.4.1.2544.1.12.37.2.9 · 1 row entry · 6 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3AclRuleThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3AclRuleThresholdTable'

A table of entries that allow manageability of L3 acl rule Thresholds.

f3L3AclRuleThresholdEntry row .1.3.6.1.4.1.2544.1.12.37.2.9.1

A conceptual row in the f3L3AclRuleThresholdTable.

Indexes

Column Syntax OID

f3L3AclRuleThresholdIndex

An index that uniquely identifies an entry in the
f3L3AclRuleThresholdTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.9.1.1

f3L3AclRuleThresholdInterval

The interval over which monitored value is
sampled and compared with the specified threshold.

f3L3AclRuleThresholdVariable

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.9.1.2

The object identifier of the particular variable to be
sampled.

f3L3AclRuleThresholdValueLo

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.37.2.9.1.3

Lower 32 bits of the threshold value.

f3L3AclRuleThresholdValueHi

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.9.1.4

Higher 32 bits of the threshold value.

f3L3AclRuleThresholdMonValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.9.1.5

Monitored value corresponding to f3L3AclRuleThresholdVariable.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortTypeIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3QosPolicerIndex f3L3QosPolicerStatsIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2544.1.12.37.2.9.1.6

f3L3QosPolicerStatsTable

table

.1.3.6.1.4.1.2544.1.12.37.2.10 · 1 row entry · 11 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3QosPolicerStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3QosPolicerStatsTable'

A collection of QOS Policer statistics.  
These reflect the current data.

f3L3QosPolicerStatsEntry row .1.3.6.1.4.1.2544.1.12.37.2.10.1

A conceptual row in the f3L3QosPolicerStatsTable.
Entries exist in this table for each l3 flow point policer.

Indexes

Column Syntax OID

f3L3QosPolicerStatsIndex

An integer index value used to uniquely identify
this QOS Policer statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.10.1.1

f3L3QosPolicerStatsIntervalType

Interval over which Performance Monitoring data is collected.

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.10.1.2

f3L3QosPolicerStatsValid

Indicates the validity of the bin.

f3L3QosPolicerStatsAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.10.1.3

Allows the Manager to clear the bin.

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.10.1.4

f3L3QosPolicerStatsFMG

Frames Marked Green.

.1.3.6.1.4.1.2544.1.12.37.2.10.1.5

f3L3QosPolicerStatsFMY

Frames Marked Yellow.

.1.3.6.1.4.1.2544.1.12.37.2.10.1.6

f3L3QosPolicerStatsFMYDdeprecated

Frames Marked Yellow and Dropped.

.1.3.6.1.4.1.2544.1.12.37.2.10.1.7

f3L3QosPolicerStatsFMRD

Frames Marked Red and Discarded.

f3L3QosPolicerStatsBytesIn

.1.3.6.1.4.1.2544.1.12.37.2.10.1.8

Number of bytes received by the Policer.

f3L3QosPolicerStatsBytesOut

.1.3.6.1.4.1.2544.1.12.37.2.10.1.9

Number of bytes transmitted by the Policer.

.1.3.6.1.4.1.2544.1.12.37.2.10.1.10

f3L3QosPolicerStatsABR

Average Bit Rate on the Policer.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortTypeIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3QosPolicerIndex f3L3QosPolicerStatsIndex f3L3QosPolicerHistoryIndex

.1.3.6.1.4.1.2544.1.12.37.2.10.1.11

f3L3QosPolicerHistoryTable

table

.1.3.6.1.4.1.2544.1.12.37.2.11 · 1 row entry · 11 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3QosPolicerHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3QosPolicerHistoryTable'

A collection of QOS Policer statistics.  
These reflect the current data.

f3L3QosPolicerHistoryEntry row .1.3.6.1.4.1.2544.1.12.37.2.11.1

A conceptual row in the f3L3QosPolicerHistoryTable.
Entries exist in this table for each flow point policer.

Indexes

Column Syntax OID

f3L3QosPolicerHistoryIndex

An arbitrary integer index value used to uniquely identify
this QOS Policer history entry.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.11.1.1

f3L3QosPolicerHistoryTime

Indicates the time of history bin creation.

f3L3QosPolicerHistoryValid

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.37.2.11.1.2

Indicates the validity of the bin.

f3L3QosPolicerHistoryAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.11.1.3

Allows the Manager to clear the bin.

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.11.1.4

f3L3QosPolicerHistoryFMG

Frames Marked Green.

.1.3.6.1.4.1.2544.1.12.37.2.11.1.5

f3L3QosPolicerHistoryFMY

Frames Marked Yellow.

.1.3.6.1.4.1.2544.1.12.37.2.11.1.6

f3L3QosPolicerHistoryFMYDdeprecated

Frames Marked Yellow and Dropped.

f3L3QosPolicerHistoryFMRD

.1.3.6.1.4.1.2544.1.12.37.2.11.1.7

Frames Marked Red and Discarded.

f3L3QosPolicerHistoryBytesIn

.1.3.6.1.4.1.2544.1.12.37.2.11.1.8

Number of bytes received by the Policer.

f3L3QosPolicerHistoryBytesOut

.1.3.6.1.4.1.2544.1.12.37.2.11.1.9

Number of bytes transmitted by the Policer.

.1.3.6.1.4.1.2544.1.12.37.2.11.1.10

f3L3QosPolicerHistoryABR

Average Bit Rate on the Policer.

f3L3QosPolicerThresholdIndex

.1.3.6.1.4.1.2544.1.12.37.2.11.1.11

f3L3QosPolicerThresholdTable

table

.1.3.6.1.4.1.2544.1.12.37.2.12 · 1 row entry · 6 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3QosPolicerThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3QosPolicerThresholdTable'

A table of entries that allow manageability of QOS
Policer Thresholds.

f3L3QosPolicerThresholdEntry row .1.3.6.1.4.1.2544.1.12.37.2.12.1

A conceptual row in the f3L3QosPolicerThresholdTable.

Indexes

Column Syntax OID

An index that uniquely identifies an entry in the
f3L3QosPolicerThresholdTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.12.1.1

f3L3QosPolicerThresholdInterval

The interval over which monitored value is
sampled and compared with the specified threshold.

f3L3QosPolicerThresholdVariable

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.12.1.2

The object identifier of the particular variable to be
sampled.

f3L3QosPolicerThresholdValueLo

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.37.2.12.1.3

Lower 32 bits of the threshold value.

f3L3QosPolicerThresholdValueHi

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.12.1.4

Higher 32 bits of the threshold value.

f3L3QosPolicerThresholdMonValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.12.1.5

Monitored value corresponding to f3L3QosPolicerThresholdVariable.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortTypeIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3QosShaperIndex f3L3QosShaperStatsIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2544.1.12.37.2.12.1.6

f3L3QosShaperStatsTable

table

.1.3.6.1.4.1.2544.1.12.37.2.13 · 1 row entry · 14 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3QosShaperStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3QosShaperStatsTable'

A collection of L3 flow point Level QOS Shaper statistics.  
These reflect the current data.

f3L3QosShaperStatsEntry row .1.3.6.1.4.1.2544.1.12.37.2.13.1

A conceptual row in the f3L3QosShaperStatsTable.
Entries exist in this table for each QOS Shaper per L3 flow point.

Indexes

Column Syntax OID

f3L3QosShaperStatsIndex

An arbitrary integer index value used to uniquely identify
this QOS Shaper statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.13.1.1

f3L3QosShaperStatsIntervalType

Interval over which Performance Monitoring data is collected.

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.13.1.2

f3L3QosShaperStatsValid

Indicates the validity of the bin.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.13.1.3

f3L3QosShaperStatsAction

Allows the Manager to clear the bin.

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.13.1.4

f3L3QosShaperStatsBT

Bytes Transmitted.

.1.3.6.1.4.1.2544.1.12.37.2.13.1.5

f3L3QosShaperStatsBTD

Bytes Tail Dropped.

.1.3.6.1.4.1.2544.1.12.37.2.13.1.6

f3L3QosShaperStatsFD

Frames Dequeued.

.1.3.6.1.4.1.2544.1.12.37.2.13.1.7

f3L3QosShaperStatsFTD

Frames Tail Dropped.

.1.3.6.1.4.1.2544.1.12.37.2.13.1.8

f3L3QosShaperStatsBR

Bytes Replicated.

.1.3.6.1.4.1.2544.1.12.37.2.13.1.9

f3L3QosShaperStatsFR

Frames Replicated.

.1.3.6.1.4.1.2544.1.12.37.2.13.1.10

f3L3QosShaperStatsABRRL

Average Bit Rate - Rate Limited.

.1.3.6.1.4.1.2544.1.12.37.2.13.1.11

f3L3QosShaperStatsABRRLR

Average Bit Rate - Rate Limited, Replicated.

.1.3.6.1.4.1.2544.1.12.37.2.13.1.12

f3L3QosShaperStatsBREDD

Bytes Random Early Discard, Dropped.

.1.3.6.1.4.1.2544.1.12.37.2.13.1.13

f3L3QosShaperStatsFREDD

Frames Random Early Discard, Dropped.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortTypeIndex f3L3FlowPointPortIndex f3L3FlowPointIndex f3L3QosShaperIndex f3L3QosShaperStatsIndex f3L3QosShaperHistoryIndex

.1.3.6.1.4.1.2544.1.12.37.2.13.1.14

f3L3QosShaperHistoryTable

table

.1.3.6.1.4.1.2544.1.12.37.2.14 · 1 row entry · 14 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3QosShaperHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3QosShaperHistoryTable'

A collection of l3 flow point Level QOS Shaper statistics.
These reflect the history data.

f3L3QosShaperHistoryEntry row .1.3.6.1.4.1.2544.1.12.37.2.14.1

A conceptual row in the f3L3QosShaperHistoryTable.
Entries exist in this table for each Shaper per l3 flow point.

Indexes

Column Syntax OID

f3L3QosShaperHistoryIndex

An arbitrary integer index value used to uniquely identify
this QOS Shaper statistics entry.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.14.1.1

f3L3QosShaperHistoryTime

Indicates the time of history bin creation.

f3L3QosShaperHistoryValid

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.37.2.14.1.2

Indicates the validity of the bin.

f3L3QosShaperHistoryAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.14.1.3

Allows the Manager to clear the bin.

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.14.1.4

f3L3QosShaperHistoryBT

Bytes Transmitted.

.1.3.6.1.4.1.2544.1.12.37.2.14.1.5

f3L3QosShaperHistoryBTD

Bytes Tail Dropped.

.1.3.6.1.4.1.2544.1.12.37.2.14.1.6

f3L3QosShaperHistoryFD

Frames Dequeued.

.1.3.6.1.4.1.2544.1.12.37.2.14.1.7

f3L3QosShaperHistoryFTD

Frames Tail Dropped.

.1.3.6.1.4.1.2544.1.12.37.2.14.1.8

f3L3QosShaperHistoryBR

Bytes Replicated.

.1.3.6.1.4.1.2544.1.12.37.2.14.1.9

f3L3QosShaperHistoryFR

Frames Replicated.

f3L3QosShaperHistoryABRRL

.1.3.6.1.4.1.2544.1.12.37.2.14.1.10

Average Bit Rate - Rate Limited.

f3L3QosShaperHistoryABRRLR

.1.3.6.1.4.1.2544.1.12.37.2.14.1.11

Average Bit Rate - Rate Limited, Replicated.

f3L3QosShaperHistoryBREDD

.1.3.6.1.4.1.2544.1.12.37.2.14.1.12

Bytes Random Early Discard, Dropped.

f3L3QosShaperHistoryFREDD

.1.3.6.1.4.1.2544.1.12.37.2.14.1.13

Frames Random Early Discard, Dropped.

f3L3QosShaperThresholdIndex

.1.3.6.1.4.1.2544.1.12.37.2.14.1.14

f3L3QosShaperThresholdTable

table

.1.3.6.1.4.1.2544.1.12.37.2.15 · 1 row entry · 6 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L3QosShaperThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L3QosShaperThresholdTable'

A table of entries that allow manageability of QOS
Shaper Thresholds.

f3L3QosShaperThresholdEntry row .1.3.6.1.4.1.2544.1.12.37.2.15.1

A conceptual row in the f3L3QosShaperThresholdTable.

Indexes

Column Syntax OID

An index that uniquely identifies an entry in the
f3L3QosShaperThresholdTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.15.1.1

f3L3QosShaperThresholdInterval

The interval over which monitored value is
sampled and compared with the specified threshold.

f3L3QosShaperThresholdVariable

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.15.1.2

The object identifier of the particular variable to be
sampled.

f3L3QosShaperThresholdValueLo

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.37.2.15.1.3

Lower 32 bits of the threshold value.

f3L3QosShaperThresholdValueHi

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.15.1.4

Higher 32 bits of the threshold value.

f3L3QosShaperThresholdMonValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.15.1.5

Monitored value corresponding to f3L3QosShaperThresholdVariable.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L2A2NAclRuleParentIndex f3L2A2NAclRuleIndex f3L2A2NAclRuleStatsIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2544.1.12.37.2.15.1.6

f3L2A2NAclRuleStatsTable

table

.1.3.6.1.4.1.2544.1.12.37.2.16 · 1 row entry · 5 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L2A2NAclRuleStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L2A2NAclRuleStatsTable'

A collection of L3 acl rule related statistics.  
These reflect the current data.

f3L2A2NAclRuleStatsEntry row .1.3.6.1.4.1.2544.1.12.37.2.16.1

A conceptual row in the f3L2A2NAclRuleStatsTable.
Entries exist in this table for each Acl rule.

Indexes

Column Syntax OID

f3L2A2NAclRuleStatsIndex

An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.37.2.16.1.1

f3L2A2NAclRuleStatsIntervalType

Interval over which Performance Monitoring data is collected.

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.16.1.2

f3L2A2NAclRuleStatsValid

Indicates the validity of the bin.

f3L2A2NAclRuleStatsAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.16.1.3

Allows the Manager to clear the bin.

f3L2A2NAclRuleStatsRuleMatch

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.16.1.4

The number of packets matching the ACL rule.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L2A2NAclRuleParentIndex f3L2A2NAclRuleIndex f3L2A2NAclRuleStatsIndex f3L2A2NAclRuleHistoryIndex

.1.3.6.1.4.1.2544.1.12.37.2.16.1.5

f3L2A2NAclRuleHistoryTable

table

.1.3.6.1.4.1.2544.1.12.37.2.17 · 1 row entry · 5 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L2A2NAclRuleHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L2A2NAclRuleHistoryTable'

A collection of L3 acl rule related history statistics.  
These reflect the history data.

f3L2A2NAclRuleHistoryEntry row .1.3.6.1.4.1.2544.1.12.37.2.17.1

A conceptual row in the f3L2A2NAclRuleHistoryTable.
Entries exist in this table for each L3 acl rule.

Indexes

Column Syntax OID

f3L2A2NAclRuleHistoryIndex

An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.37.2.17.1.1

f3L2A2NAclRuleHistoryTime

Indicates the time of history bin creation.

f3L2A2NAclRuleHistoryValid

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.37.2.17.1.2

Indicates the validity of the bin.

f3L2A2NAclRuleHistoryAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.17.1.3

Allows the Manager to clear the bin.

f3L2A2NAclRuleHistoryRuleMatch

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.17.1.4

The number of packets matching acl rule.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L2A2NAclRuleParentIndex f3L2A2NAclRuleIndex f3L2A2NAclRuleStatsIndex f3L2A2NAclRuleThresholdIndex

.1.3.6.1.4.1.2544.1.12.37.2.17.1.5

f3L2A2NAclRuleThresholdTable

table

.1.3.6.1.4.1.2544.1.12.37.2.18 · 1 row entry · 6 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L2A2NAclRuleThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L2A2NAclRuleThresholdTable'

A table of entries that allow manageability of L3 acl rule Thresholds.

f3L2A2NAclRuleThresholdEntry row .1.3.6.1.4.1.2544.1.12.37.2.18.1

A conceptual row in the f3L2A2NAclRuleThresholdTable.

Indexes

Column Syntax OID

f3L2A2NAclRuleThresholdIndex

An index that uniquely identifies an entry in the
f3L2A2NAclRuleThresholdTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.18.1.1

f3L2A2NAclRuleThresholdInterval

The interval over which monitored value is
sampled and compared with the specified threshold.

f3L2A2NAclRuleThresholdVariable

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.18.1.2

The object identifier of the particular variable to be
sampled.

f3L2A2NAclRuleThresholdValueLo

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.37.2.18.1.3

Lower 32 bits of the threshold value.

f3L2A2NAclRuleThresholdValueHi

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.18.1.4

Higher 32 bits of the threshold value.

f3L2A2NAclRuleThresholdMonValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.18.1.5

Monitored value corresponding to f3L2A2NAclRuleThresholdVariable.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L2N2AAclRuleParentIndex f3L2N2AAclRuleIndex f3L2N2AAclRuleStatsIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2544.1.12.37.2.18.1.6

f3L2N2AAclRuleStatsTable

table

.1.3.6.1.4.1.2544.1.12.37.2.19 · 1 row entry · 5 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L2N2AAclRuleStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L2N2AAclRuleStatsTable'

A collection of L3 acl rule related statistics.  
These reflect the current data.

f3L2N2AAclRuleStatsEntry row .1.3.6.1.4.1.2544.1.12.37.2.19.1

A conceptual row in the f3L2N2AAclRuleStatsTable.
Entries exist in this table for each Acl rule.

Indexes

Column Syntax OID

f3L2N2AAclRuleStatsIndex

An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.37.2.19.1.1

f3L2N2AAclRuleStatsIntervalType

Interval over which Performance Monitoring data is collected.

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.19.1.2

f3L2N2AAclRuleStatsValid

Indicates the validity of the bin.

f3L2N2AAclRuleStatsAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.19.1.3

Allows the Manager to clear the bin.

f3L2N2AAclRuleStatsRuleMatch

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.19.1.4

The number of packets matching the ACL rule.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L2N2AAclRuleParentIndex f3L2N2AAclRuleIndex f3L2N2AAclRuleStatsIndex f3L2N2AAclRuleHistoryIndex

.1.3.6.1.4.1.2544.1.12.37.2.19.1.5

f3L2N2AAclRuleHistoryTable

table

.1.3.6.1.4.1.2544.1.12.37.2.20 · 1 row entry · 5 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L2N2AAclRuleHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L2N2AAclRuleHistoryTable'

A collection of L3 acl rule related history statistics.  
These reflect the history data.

f3L2N2AAclRuleHistoryEntry row .1.3.6.1.4.1.2544.1.12.37.2.20.1

A conceptual row in the f3L2N2AAclRuleHistoryTable.
Entries exist in this table for each L3 acl rule.

Indexes

Column Syntax OID

f3L2N2AAclRuleHistoryIndex

An arbitrary integer index value used to uniquely identify
this L3 flow point statistics entry.
1 - 15min
2 - 1day
3 - rollover
4 - 5min

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.37.2.20.1.1

f3L2N2AAclRuleHistoryTime

Indicates the time of history bin creation.

f3L2N2AAclRuleHistoryValid

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.37.2.20.1.2

Indicates the validity of the bin.

f3L2N2AAclRuleHistoryAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.37.2.20.1.3

Allows the Manager to clear the bin.

f3L2N2AAclRuleHistoryRuleMatch

Type Values:

0	not-applicable
1	clear

.1.3.6.1.4.1.2544.1.12.37.2.20.1.4

The number of packets matching acl rule.

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3L3FlowPointPortIndex f3L2N2AAclRuleParentIndex f3L2N2AAclRuleIndex f3L2N2AAclRuleStatsIndex f3L2N2AAclRuleThresholdIndex

.1.3.6.1.4.1.2544.1.12.37.2.20.1.5

f3L2N2AAclRuleThresholdTable

table

.1.3.6.1.4.1.2544.1.12.37.2.21 · 1 row entry · 6 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3L2N2AAclRuleThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-L3-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-L3-MIB::f3L2N2AAclRuleThresholdTable'

A table of entries that allow manageability of L3 acl rule Thresholds.

f3L2N2AAclRuleThresholdEntry row .1.3.6.1.4.1.2544.1.12.37.2.21.1

A conceptual row in the f3L2N2AAclRuleThresholdTable.

Indexes

Column Syntax OID

f3L2N2AAclRuleThresholdIndex

An index that uniquely identifies an entry in the
f3L2N2AAclRuleThresholdTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.37.2.21.1.1

f3L2N2AAclRuleThresholdInterval

The interval over which monitored value is
sampled and compared with the specified threshold.

f3L2N2AAclRuleThresholdVariable

Type Values:

1	interval-15min
2	interval-1day
3	rollover
4	interval-5min

.1.3.6.1.4.1.2544.1.12.37.2.21.1.2

The object identifier of the particular variable to be
sampled.

f3L2N2AAclRuleThresholdValueLo

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.37.2.21.1.3

Lower 32 bits of the threshold value.

f3L2N2AAclRuleThresholdValueHi

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.21.1.4

Higher 32 bits of the threshold value.

f3L2N2AAclRuleThresholdMonValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.37.2.21.1.5

Monitored value corresponding to f3L2N2AAclRuleThresholdVariable.