dot3PauseAdminMode
EtherLike-MIB ·
.1.3.6.1.2.1.10.7.10.1.1
Object
column
r/w
Enumeration
This object is used to configure the default
administrative PAUSE mode for this interface.
This object represents the
administratively-configured PAUSE mode for this
interface. If auto-negotiation is not enabled
or is not implemented for the active MAU
attached to this interface, the value of this
object determines the operational PAUSE mode
of the interface whenever it is operating in
full-duplex mode. In this case, a set to this
object will force the interface into the
specified mode.
If auto-negotiation is implemented and enabled
for the MAU attached to this interface, the
PAUSE mode for this interface is determined by
auto-negotiation, and the value of this object
denotes the mode to which the interface will
automatically revert if/when auto-negotiation is
later disabled. Note that when auto-negotiation
is running, administrative control of the PAUSE
mode may be accomplished using the
ifMauAutoNegCapAdvertisedBits object in the
MAU-MIB.
Note that the value of this object is ignored
when the interface is not operating in
full-duplex mode.
An attempt to set this object to
'enabledXmit(2)' or 'enabledRcv(3)' will fail
on interfaces that do not support operation
at greater than 100 Mb/s.
Context
- MIB
- EtherLike-MIB
- OID
.1.3.6.1.2.1.10.7.10.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dot3PauseEntry
- Table
- dot3PauseTable
- Siblings
- 5
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disabled |
2 | enabledXmit |
3 | enabledRcv |
4 | enabledXmitAndRcv |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3PauseOperMode This object reflects the PAUSE mode currently
in use on this interface, as determined by
either (1) the result of the auto-negotiation
function or (2) if auto-negot… | column | Enumeration | .1.3.6.1.2.1.10.7.10.1.2 |
| dot3InPauseFrames A count of MAC Control frames received on this
interface with an opcode indicating the PAUSE
operation.
This counter does not increment when the
interface is operat… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.7.10.1.3 |
| dot3OutPauseFrames A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is ope… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.7.10.1.4 |
| dot3HCInPauseFrames A count of MAC Control frames received on this
interface with an opcode indicating the PAUSE
operation.
This counter does not increment when the
interface is operat… | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.10.7.10.1.5 |
| dot3HCOutPauseFrames A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is ope… | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.10.7.10.1.6 |