extremeWirelessPortPartRevision
EXTREME-WIRELESS-MIB ·
.1.3.6.1.4.1.1916.1.25.1.1.1.27
Object
This describes the revision of the AP.
Context
- MIB
- EXTREME-WIRELESS-MIB
- OID
.1.3.6.1.4.1.1916.1.25.1.1.1.27- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- extremeWirelessPortStatusEntry
- Table
- extremeWirelessPortStatusTable
- Siblings
- 34
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| extremeWirelessPortIpAddress This value is assigned to the port for external
management. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1916.1.25.1.1.1.1 |
| extremeWirelessPortSWVersion This is the current software version of this AP. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.10 |
| extremeWirelessPortSysDescr This is the equivalent value of sysDescr from the AP. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.11 |
| extremeWirelessPortManufacturerName | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.12 |
| extremeWirelessPortProductName | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.13 |
| extremeWirelessPortSerialNumber This is the unique serial number for this device. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.14 |
| extremeWirelessPortEdpNeighborId EDP assigns a unique ID to each neighbor to
disambiguate references. This can be used to index
into the extremeEdpTable. | column | EXTREME-BASE-MIBExtremeDeviceId | .1.3.6.1.4.1.1916.1.25.1.1.1.15 |
| extremeWirelessPortClearCounters This value can be set to true to force the device
to reset it's counters. A read will return false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.25.1.1.1.16 |
| extremeWirelessPortClearLog This value can be set to true to force the device
to clear its local log store. A read will return
false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.25.1.1.1.17 |
| extremeWirelessPortWatchdogReset This is to enable/disable watchdog timer reset on timeout.
Default is enable. If it is enabled, system should reset
when the watchdog kicks in. On next bootup, it should
send ou… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.25.1.1.1.18 |
| extremeWirelessPortNumPhysInterfaces Each wireless port has a set of physical interface which are
numbered 1-N. This variable gives the number of
physical interfaces on this AP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1916.1.25.1.1.1.19 |
| extremeWirelessPortNetmask This value is assigned to the AP for external
management. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1916.1.25.1.1.1.2 |
| extremeWirelessPortHWVersion This is the current hardware version of this AP. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.20 |
| extremeWirelessPortMacAddress Unique MAC Address assigned to the ethernet interface on the AP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.1916.1.25.1.1.1.21 |
| extremeWirelessPortRadiusPortID A string value that should be sent by the AP to the radius
server as the Port-ID radius attribute in authentication requests | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.22 |
| extremeWirelessPortBootUpTime The sysUpTime of the LAC when the port was booted up.
Should be set only during the AP boot up. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.1916.1.25.1.1.1.23 |
| extremeWirelessPortCountryCode The country code that the AP is programmed to operate in. | column | ExtremeWirelessCountryCode | .1.3.6.1.4.1.1916.1.25.1.1.1.24 |
| extremeWirelessPortWallclockTime The wall clock time as known to the LAC.
Expressed in number of seconds since Jan 1, 1970 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1916.1.25.1.1.1.25 |
| extremeWirelessPortPartNumber This describes the part number of the AP. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.26 |
| extremeWirelessPortUpTime The number of seconds the port has been in the online state. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.1916.1.25.1.1.1.28 |
| extremeWirelessPortStatusAntennaType This is the type of the Antenna for Detachable product.
For Altitude-2d series, further selection is available
through this variable. | column | ExtremeWirelessAntennaType | .1.3.6.1.4.1.1916.1.25.1.1.1.29 |
| extremeWirelessPortGateway This value is assigned to the AP for external
management. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1916.1.25.1.1.1.3 |
| extremeWirelessPortStatusAntennaLocation This specifies the location the detachable antenna. | column | ExtremeWirelessAntennaLocation | .1.3.6.1.4.1.1916.1.25.1.1.1.30 |
| extremeWirelessPortStatusAntenna2point4GHZGain This specifies 2.4GHz gain value for detachable antenna in dbi | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1916.1.25.1.1.1.31 |
| extremeWirelessPortStatusAntenna5GHZGain This specifies 5GHz gain value for detachable antenna in dbi | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1916.1.25.1.1.1.32 |
| extremeWirelessPortPrimaryBootloaderVersion This is the version of the primary bootloader on this AP. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.33 |
| extremeWirelessPortSecondaryBootloaderVersion This is the version of the Secondary bootloader on this AP. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.34 |
| extremeWirelessPortCurrentBootloaderInUse This specifies if the bootloader booted is primary or secondary one. | column | Enumeration | .1.3.6.1.4.1.1916.1.25.1.1.1.35 |
| extremeWirelessPortManagementIP This value is used by the AP when sending out Management
packets to the external world. This IP is used as src-ip
address in Syslog messages, as NAS-Identifier in Radius request… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1916.1.25.1.1.1.4 |
| extremeWirelessPortEnableWirelessTraps If set to TRUE the wireless port will send traps for
Authentication and association successful events.
If set to FALSE no traps will be generated.
Note: We always… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.25.1.1.1.5 |
| extremeWirelessPortLocation This describes the physical location of the wireless
port. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.6 |
| extremeWirelessPortDetectedMaxAge This is the number of seconds a station can stay
in the detected station table without authenticating. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.1916.1.25.1.1.1.7 |
| extremeWirelessPortMgmtVLAN This value indicates the VLAN tag that should be
applied to all control traffic between the AP and
the platform. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1916.1.25.1.1.1.8 |
| extremeWirelessPortBootromVersion This is the current version of the bootrom on this AP. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.1.1.1.9 |