EXTREME-WIRELESS-MIB Table View

This table contains one entry per detected AP.

extremeWirelessPortStatusEntry row .1.3.6.1.4.1.1916.1.25.1.1.1

Indexes

extremeWirelessPortIfIndex

Column	Syntax	OID
extremeWirelessPortIpAddress This value is assigned to the port for external management.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1916.1.25.1.1.1.1
extremeWirelessPortNetmask This value is assigned to the AP for external management.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1916.1.25.1.1.1.2
extremeWirelessPortGateway This value is assigned to the AP for external management.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1916.1.25.1.1.1.3
extremeWirelessPortManagementIP This value is used by the AP when sending out Management packets to the external world. This IP is used as src-ip address in Syslog messages, as NAS-Identifier in Radius requests, and as Agent-Addr in SNMP trap pdu's.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1916.1.25.1.1.1.4
extremeWirelessPortEnableWirelessTraps If set to TRUE the wireless port will send traps for Authentication and association successful events. If set to FALSE no traps will be generated. Note: We always generate the wireless port status traps.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.1.1.5
extremeWirelessPortLocation This describes the physical location of the wireless port.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.1916.1.25.1.1.1.6
extremeWirelessPortDetectedMaxAge This is the number of seconds a station can stay in the detected station table without authenticating.	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.1.1.7
extremeWirelessPortMgmtVLAN This value indicates the VLAN tag that should be applied to all control traffic between the AP and the platform.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.1.1.8
extremeWirelessPortBootromVersion This is the current version of the bootrom on this AP.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.1.1.9
extremeWirelessPortSWVersion This is the current software version of this AP.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.1.1.10
extremeWirelessPortSysDescr This is the equivalent value of sysDescr from the AP.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.1.1.11
extremeWirelessPortManufacturerName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.1.1.12
extremeWirelessPortProductName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.1.1.13
extremeWirelessPortSerialNumber This is the unique serial number for this device.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.1.1.14
extremeWirelessPortEdpNeighborId EDP assigns a unique ID to each neighbor to disambiguate references. This can be used to index into the extremeEdpTable.	EXTREME-BASE-MIBExtremeDeviceId Type Constraints: range: 8	.1.3.6.1.4.1.1916.1.25.1.1.1.15
extremeWirelessPortClearCounters This value can be set to true to force the device to reset it's counters. A read will return false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.1.1.16
extremeWirelessPortClearLog This value can be set to true to force the device to clear its local log store. A read will return false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.1.1.17
extremeWirelessPortWatchdogReset This is to enable/disable watchdog timer reset on timeout. Default is enable. If it is enabled, system should reset when the watchdog kicks in. On next bootup, it should send out an syslog message to syslog server. I…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.1.1.18
extremeWirelessPortNumPhysInterfaces Each wireless port has a set of physical interface which are numbered 1-N. This variable gives the number of physical interfaces on this AP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.1.1.19
extremeWirelessPortHWVersion This is the current hardware version of this AP.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.1.1.20
extremeWirelessPortMacAddress Unique MAC Address assigned to the ethernet interface on the AP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1916.1.25.1.1.1.21
extremeWirelessPortRadiusPortID A string value that should be sent by the AP to the radius server as the Port-ID radius attribute in authentication requests	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.1916.1.25.1.1.1.22
extremeWirelessPortBootUpTime The sysUpTime of the LAC when the port was booted up. Should be set only during the AP boot up.	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.1.1.23
extremeWirelessPortCountryCode The country code that the AP is programmed to operate in.	ExtremeWirelessCountryCoder/w Type Values: 0 restOfTheWorld 8 albania 12 algeria 31 azerbaijan 32 argentina 36 australia 40 austria 48 bahrain 51 armenia 56 belgium 68 bolivia 76 brazil 84 belize 96 bruneiDarussalam 100 bulgaria 112 belarus 124 canada 152 chile 156 china 158 taiwan 170 colombia 188 costaRica 191 croatia 196 cyprus 203 czech 208 denmark 214 dominicanRepublic 218 ecuador 222 elSalvador 233 estonia 234 faeroeIslands 246 finland 250 france 268 georgia 276 germany 300 greece 320 guatemala 340 honduras 344 hongKong 348 hungary 352 iceland 356 india 360 indonesia 364 iran 368 iraq 372 ireland 376 israel 380 italy 388 jamaica 392 japan 393 japan1 394 japan2 395 japan3 398 kazakhstan 400 jordan 404 kenya 408 koreaNorth 410 koreaRoc 411 koreaRoc2 414 kuwait 422 lebanon 428 latvia 434 libya 438 liechtenstein 440 lithuania 442 luxembourg 446 macau 458 malaysia 484 mexico 492 monaco 504 morocco 512 oman 528 netherlands 554 newZealand 558 nicaragua 578 norway 586 pakistan 591 panama 600 paraguay 604 peru 608 philippines 616 poland 620 portugal 630 puertoRico 634 qatar 642 romania 643 russia 682 saudiArabia 702 singapore 703 slovakia 704 vietNam 705 slovenia 710 southAfrica 716 zimbabwe 724 spain 752 sweden 756 switzerland 760 syria 764 thailand 780 trinidadTYobago 784 uae 788 tunisia 792 turkey 804 ukraine 807 macedonia 818 egypt 826 unitedKingdom 840 unitedStates 858 uruguay 860 uzbekistan 862 venezuela 887 yemen 998 extremeDefault 999 unknown	.1.3.6.1.4.1.1916.1.25.1.1.1.24
extremeWirelessPortWallclockTime The wall clock time as known to the LAC. Expressed in number of seconds since Jan 1, 1970	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.1.1.25
extremeWirelessPortPartNumber This describes the part number of the AP.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.1916.1.25.1.1.1.26
extremeWirelessPortPartRevision This describes the revision of the AP.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.1916.1.25.1.1.1.27
extremeWirelessPortUpTime The number of seconds the port has been in the online state.	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.1.1.28
extremeWirelessPortStatusAntennaType This is the type of the Antenna for Detachable product. For Altitude-2d series, further selection is available through this variable.	ExtremeWirelessAntennaTyper/w Type Values: 0 integrated 1 detachable15901 2 detachable15902	.1.3.6.1.4.1.1916.1.25.1.1.1.29
extremeWirelessPortStatusAntennaLocation This specifies the location the detachable antenna.	ExtremeWirelessAntennaLocationr/w Type Values: 0 indoor 1 outdoor	.1.3.6.1.4.1.1916.1.25.1.1.1.30
extremeWirelessPortStatusAntenna2point4GHZGain This specifies 2.4GHz gain value for detachable antenna in dbi	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.1.1.31
extremeWirelessPortStatusAntenna5GHZGain This specifies 5GHz gain value for detachable antenna in dbi	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.1.1.32
extremeWirelessPortPrimaryBootloaderVersion This is the version of the primary bootloader on this AP.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.1.1.33
extremeWirelessPortSecondaryBootloaderVersion This is the version of the Secondary bootloader on this AP.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.1.1.34
extremeWirelessPortCurrentBootloaderInUse This specifies if the bootloader booted is primary or secondary one.	Enumeration Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.1916.1.25.1.1.1.35

This table contains one entry for each wireless port
which is configured via the configuration table.

extremeWirelessPortLogStatusEntry row .1.3.6.1.4.1.1916.1.25.1.2.1

Indexes

extremeWirelessPortIfIndex extremeWirelessPortLogStatusIndex

Column	Syntax	OID
extremeWirelessPortLogStatusIndex There are 9 entries in this table to correspond to the 8 entries configured in the cfg table plus one for the LAC.	Integer32 Constraints: range: 1-9	.1.3.6.1.4.1.1916.1.25.1.2.1.1
extremeWirelessPortLogStatusDestIp This is the IP address to which syslog messsages will be sent. A value of 0.0.0.0 indicates that this entry is disabled. The source IP for every syslog message comes from the ManagementIP field in extremeWirelessPortS…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.1916.1.25.1.2.1.2
extremeWirelessPortLogStatusDestIpType The type of address specified in the object 'extremeWirelessPortLogStatusDestIp. Currently, only 'ipv4' and 'dns' are supported.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.1916.1.25.1.2.1.3
extremeWirelessPortLogStatusPort This is the port to which syslog messages will be sent.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.2.1.4
extremeWirelessPortLogStatusFacility Optional value for syslog facility local0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.1916.1.25.1.2.1.5
extremeWirelessPortLogStatusSeverity The syslog message severity. All syslog messages that have a severity >= specified severity, will be sent to this syslog server.	Enumerationr/w Enumerated Values: 0 critical 1 error 2 warning 3 notice 4 info 5 debugSummary 6 debugVerbose 7 debugData	.1.3.6.1.4.1.1916.1.25.1.2.1.6
extremeWirelessPortLogStatusStatus Specifies whether the log server is enabled or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.2.1.7

This table allows access to the syslog entries on
particular wireless ports.

extremeWirelessPortLogEntry row .1.3.6.1.4.1.1916.1.25.1.3.1

Indexes

extremeWirelessPortIfIndex extremeWirelessPortLogIndex

Column	Syntax	OID
extremeWirelessPortLogIndex This is an arbitrary integer which is assinged to entries in order of their insertion.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1916.1.25.1.3.1.1
extremeWirelessPortLogMessage This is the formatted syslog message which was sent.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.3.1.2

This table provides configuration of per-physical interface
values.

extremeWirelessPhysInterfaceCtlEntry row .1.3.6.1.4.1.1916.1.25.1.4.1

Each entry is indexed by the wirelessInterfaceIndex, and
represents a wireless interface.

Indexes

extremeWirelessPhysInterfaceIndex

Column	Syntax	OID
extremeWirelessPhysInterfaceIndex This is the ifIndex of an individual physical interface on an AP. Each radio will have a unique value.	ExtremeWirelessPhysInterfaceIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1916.1.25.1.4.1.1
extremeWirelessPhysInterfacePHYChannel This is the RF channel which will be used by this transmitter. Range should be established by configuration of RegDomain and PHYType.	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.1916.1.25.1.4.1.2
extremeWirelessPhysInterfaceSpeed This value indicates the current setting for Tx speed for the interface. Only one of thebits of this bit set can be set. If all bits are unset (ie a 0 is passed as a value) then it means that the interface should choo…	Dot11Speedr/w Type Values: 0 speed1 1 speed2 2 speed5 3 speed11 4 speed6 5 speed9 6 speed12 7 speed18 8 speed24 9 speed36 10 speed48 11 speed54	.1.3.6.1.4.1.1916.1.25.1.4.1.3
extremeWirelessPhysInterfaceNumVirtInterfaces Each physical interface has a number of virtual interfaces This specifies the number of virt interfaces.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.4.1.4
extremeWirelessPhysInterfaceChannelAutoSelectStatus This OID reflects the status of the channel auto selection process.	ExtremeWirelessChannelAutoSelectStatus Type Values: 0 notApplicable 1 inProgress 2 success 3 radarInterferenceDuringScan 4 radarInterferenceDuringOperation 5 restartedDueToInterference	.1.3.6.1.4.1.1916.1.25.1.4.1.5
extremeWirelessPhysInterfaceRadarInterfaceChannelList This OID reflects the list oc 802.11(a) channels on which radar interference was detected.	Dot11AChannel Type Values: 0 channel36 1 channel40 2 channel44 3 channel52 4 channel56 5 channel60 6 channel64 7 channel100 8 channel104 9 channel108 10 channel112 11 channel116 12 channel120 13 channel124 14 channel128 15 channel132 16 channel140	.1.3.6.1.4.1.1916.1.25.1.4.1.6

This table provides statistics and information on the
current condition of each wireless interace.
There is one entry per virtual and physical wireless 
interface in this table.  The values for the physical 
interfaces represent the sum of the values for all sub
interfaces.

extremeWirelessInterfaceStatusEntry row .1.3.6.1.4.1.1916.1.25.1.5.1

Each entry in this table is indexed by either a virtual or
a physical ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
extremeWirelessIntfTotalDetected This gives the total number of stations which have entered the detected state on this wireless interface since the last time the counters were cleared.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.1
extremeWirelessIntfTotalAuthed This gives the total number of stations which have entered the authenticated state on this wireless interface since the last time the counters were cleared. Note that this is equal to the number of stations which hav…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.2
extremeWirelessIntfTotalAuthFailed This gives the total number of stations which have failed to authenticate on this wireless interface. Note that no distinction is made between a MAC-layer or higher-layer authentication failure.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.3
extremeWirelessIntfTotalAssoc This gives the total number of stations which have entered the associated state on this wireless interface since the last time the counters were cleared.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.4
extremeWirelessIntfTotalAssocFailed This gives the total number of stations which have failed the association on this wireless interface since the last time the counters were cleared.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.5
extremeWirelessIntfRateDetected This gives the rate of clients being detected on this interface over a 5 second period using EMWA averaging.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.6
extremeWirelessIntfRateAuthed This gives teh rate of clients being authenticated on this interface over a 5 second period using EMWA averaging.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.7
extremeWirelessIntfRateAuthFailed This gives the rate of clients failed authentication on this interface over a 5 second period using EMWA averaging.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.8
extremeWirelessIntfRateAssoc This gives the rate of clients being associated on this interface over a 5 second period using EMWA averaging.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.9
extremeWirelessIntfRateAssocFailed This gives the rate of clients failing association on this interface over a 5 second period using EMWA averaging.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.10
extremeWirelessIntfBlockTime This value specifies the number of ticks until traffic will be allowed back on this interface. A non-zero value indicates that traffic has been blocked, most likely due to countermeasures.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.11
extremeWirelessIntfCurrentDetected This gives the current number of stations which are in the detected state on this wireless interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.12
extremeWirelessIntfCurrentAuthed This gives the current number of stations which are in the authenticated state on this wireless interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.13
extremeWirelessIntfCurrentAssoc This gives the current number of stations which are in the associated state on this wireless interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.14
extremeWirelessIntfCurrentForwarding This gives the current number of stations which are in the forwarding state on this wireless interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.5.1.15

This table provides configuration of per-physical-interface
values.

extremeWirelessVirtInterfaceCtlEntry row .1.3.6.1.4.1.1916.1.25.1.6.1

Each entry is indexed by the wirelessInterfaceIndex, and
represents a virtual wireless interface.

Indexes

extremeWirelessVirtInterfaceIndex

Column	Syntax	OID
extremeWirelessVirtInterfaceIndex This is the ifIndex of an individual interface on an AP. Each virtual interface will have a unique value.	ExtremeWirelessVirtInterfaceIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1916.1.25.1.6.1.1
extremeWirelessVirtInterfaceMacAddress The maximum number of clients that can associate with this virtual interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1916.1.25.1.6.1.2
extremeWirelessVirtInterfaceMaxClients The maximum number of clients that can associate with this virtual interface.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.1916.1.25.1.6.1.3
extremeWirelessVirtInterfaceWirelessBridging This specifies whether wireless bridging is enabled on this interface. If wireless bridging is enabled then traffic originating from a client on this interface will be bridged to clients on the same VLAN on this or othe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.6.1.4
extremeWirelessVirtInterfaceLastStateChange The value of sysUpTime when the virtual interface entered its current state	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.6.1.5
extremeWirelessVirtInterfaceState This value specifies whether the virtual interface is active or not	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1916.1.25.1.6.1.6
extremeWirelessVirtInterfaceIappEnabled IAPP status. A value of TRUE indicates IAPP is enabled on the interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.6.1.7
extremeWirelessVirtInterfaceSvpEnabled SVP status. A value of TRUE indicates SVP is enabled on the interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.6.1.8

This table provides configuration of per-interface
values.

extremeWirelessVirtInterfaceSecurityCtlEntry row .1.3.6.1.4.1.1916.1.25.1.7.1

Each entry is indexed by the wirelessInterfaceIndex, and
represents a wireless interface.

Indexes

extremeWirelessVirtInterfaceIndex

Column	Syntax	OID
extremeWirelessVirtInterfaceESSName The ESS ID of this interface.	OctetStringr/w	.1.3.6.1.4.1.1916.1.25.1.7.1.1
extremeWirelessVirtInterfaceSSIDInBeacon Does this interface generate a beacon with the SSID in it?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.7.1.2
extremeWirelessVirtInterfaceDot11AuthMode Setting this to true indicates whether to use open or shared authentication	Dot11AuthModer/w Type Values: 0 open 1 shared	.1.3.6.1.4.1.1916.1.25.1.7.1.3
extremeWirelessVirtInterfaceNetworkAuthMode This specifies the authentication mode to use on top of dot11 MAC authentication	NetworkAuthModer/w Type Values: 0 none 1 webNetlogin 2 macRadius 3 wpaPlusLegacy 4 wpaOnly 5 wpa2PlusWPA 6 wpa2Only	.1.3.6.1.4.1.1916.1.25.1.7.1.4
extremeWirelessVirtInterfaceDataVlan This is the VLAN to use for client data in case of the VLAN is not received as a VSA. This VLAN is also used for authentication types like PSK, WEP, etc	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.7.1.5
extremeWirelessVirtInterfaceIgnoreVSAVlan If this is set then the VLAN returned as a VSA will be ignored and the Data Vlan specified above will be used instead	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.7.1.6
extremeWirelessVirtInterfaceWEPDefaultKey This value indicates the index in dot11WEPDefaultKeyTable that identifies the key this interface will use to decrypt packets.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.7.1.7
extremeWirelessVirtInterfaceEncryptionLength This is the length of the encryption key to use in case of dot1x legacy mode and WEP. If this length is 0 then no WEP encryption.	Enumerationr/w Enumerated Values: 0 none 64 sixtyfour 128 onetwentyeight	.1.3.6.1.4.1.1916.1.25.1.7.1.8

There is one entry in this table for each virtual interface 
It reflects the dot1x security config

extremeWirelessVirtInterfaceDot1xCtlEntry row .1.3.6.1.4.1.1916.1.25.1.8.1

Indexes

extremeWirelessVirtInterfaceIndex

Column	Syntax	OID
extremeWirelessVirtInterfaceKeyMgmtSuite This bitmask configures the authentication suites to be used.	EXTREME-BASE-MIBWPAKeyMgmtSetr/w Type Values: 0 none 1 dot1x 2 psk	.1.3.6.1.4.1.1916.1.25.1.8.1.1
extremeWirelessVirtInterfaceMcastCipherSuite This configures the cipher suite to use for mcast traffic. The cipher suite to use for unicast traffic is derived from this using the following algorithm: Mcast cipher = WEP (64/128), Unicast cipher = TKIP Mcast ciphe…	EXTREME-BASE-MIBWPACipherSetr/w Type Values: 0 none 1 wep64 2 tkip 3 wrap 4 ccmp 5 wep128 6 other	.1.3.6.1.4.1.1916.1.25.1.8.1.2
extremeWirelessVirtInterfaceDot1xPSKValue The Pre-Shared Key (PSK) for when WPA in PSK mode is the selected authentication suite.	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.1916.1.25.1.8.1.3
extremeWirelessVirtInterfaceDot1xPSKPassPhrase The PSK, for when WPA in PSK mode is the selected authentication suite, is configured by extremeWirelessVirtInterfaceKeyMgmtSuite. An alternative manner of setting the PSK uses the password-to-key algorithm defined in s…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.1916.1.25.1.8.1.4
extremeWirelessVirtInterfaceDot1xReAuthPeriod Number of seconds a clients authentication will last before the AP automatically issues a reauthentication request.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.8.1.5
extremeWirelessVirtInterfaceGroupUpdateTimeOut The time in minutes after which the RSN group update handshake will be retried. The timer shall start at the moment the group update message is sent.	minutesUnsigned32r/w Constraints: range: 1-1440	.1.3.6.1.4.1.1916.1.25.1.8.1.6
extremeWirelessVirtInterfacePairwiseUpdateTimeOut The time in minutes after which the RSN 4-way handshake will be retried. The timer shall start at the moment a 4-way message is sent.	minutesUnsigned32r/w Constraints: range: 1-1440	.1.3.6.1.4.1.1916.1.25.1.8.1.7
extremeWirelessVirtInterfaceDot11iPreauthEnable Enables/Disable 802.11i pre-authentication.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.8.1.8

This table contains per-profile WEP keys.
          
Reference ieee802dot11.1.2.3.

extremeWirelessVirtInterfaceWEPKeyEntry row .1.3.6.1.4.1.1916.1.25.1.9.1

Indexes

extremeWirelessVirtInterfaceIndex extremeWirelessVirtInterfaceWEPKeyIndex

Column	Syntax	OID
extremeWirelessVirtInterfaceWEPKeyIndex There can be upto 4 wep keys for any wireless interface. Four of the keys are to be used with WEP Authentication, and the other four with MAC Auth.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.1916.1.25.1.9.1.1
extremeWirelessVirtInterfaceWEPKey This is a write-only wep key.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.1916.1.25.1.9.1.2
extremeWirelessVirtInterfaceWEPKeyStatus Specifies whether the key is present or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.9.1.3

This table provides configuration of per-interface
values.

extremeWirelessPhysInterfaceRFCtlEntry row .1.3.6.1.4.1.1916.1.25.1.10.1

Each entry is indexed by the wirelessInterfaceIndex, and
represents a wireless interface.

Indexes

extremeWirelessPhysInterfaceIndex

Column	Syntax	OID
extremeWirelessPhysInterfaceBeaconPeriod This is the beacon interval to use	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.10.1.1
extremeWirelessPhysInterfaceTxPowerLevel This is the % of max power to transmit at.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.1916.1.25.1.10.1.2
extremeWirelessPhysInterfaceDTIMPeriod This is the DTIM period.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.10.1.3
extremeWirelessPhysInterfaceFragLength	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.10.1.4
extremeWirelessPhysInterfaceLongRetry Attribute indicates the maximum number of transmission attempts of a frame whose size is > RTS.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.1916.1.25.1.10.1.5
extremeWirelessPhysInterfaceShortRetry Attribute indicates the maximum number of transmission attempts of a frame whose size is <= RTS.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.1916.1.25.1.10.1.6
extremeWirelessPhysInterfaceRTSThreshold	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.10.1.7
extremeWirelessPhysInterfaceSupportedDataRatesRxValue A bitmask of all supported datarates for Rx.	Dot11Speed Type Values: 0 speed1 1 speed2 2 speed5 3 speed11 4 speed6 5 speed9 6 speed12 7 speed18 8 speed24 9 speed36 10 speed48 11 speed54	.1.3.6.1.4.1.1916.1.25.1.10.1.8
extremeWirelessPhysInterfaceSupportedDataRatesTxValue A bitmask of all supported datarates for Tx.	Dot11Speed Type Values: 0 speed1 1 speed2 2 speed5 3 speed11 4 speed6 5 speed9 6 speed12 7 speed18 8 speed24 9 speed36 10 speed48 11 speed54	.1.3.6.1.4.1.1916.1.25.1.10.1.9
extremeWirelessPhysInterfacePHYType This variable selects between 802.11 a/b/g for this transmitter. It should be used by ap to range check frequency, etc.	Dot11Typer/w Type Values: 1 a 2 b 3 g 4 bg	.1.3.6.1.4.1.1916.1.25.1.10.1.10
extremeWirelessPhysInterfacePHYSupportedTypes This is the 802.11 standard supported by this interface as a bitmask	Bits Enumerated Values: 0 bsupported 1 asupported 2 gsupported	.1.3.6.1.4.1.1916.1.25.1.10.1.11
extremeWirelessPhysInterfacePreamble This changes the 802 preamble expected by the interface.	Enumerationr/w Enumerated Values: 0 short 1 long	.1.3.6.1.4.1.1916.1.25.1.10.1.12
extremeWirelessPhysInterfaceAbsTxPowerLevel This is the absolute value of max power to transmit level in dBm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.10.1.13

This table augments the Dot11AccessPointAddressTableEntry
to add a per-client VLAN entry.

extremeWirelessClientEntry row .1.3.6.1.4.1.1916.1.25.1.11.1

An entry in the extremeWirelessClientTable. It is possible
for there to be multiple IEEE 802.11 interfaces on one agent,
each with its unique MAC address. The relationship between an
IEEE 802.11 interface and an interfa…

Indexes

IF-MIBifIndex extremeWirelessClientID

Column	Syntax	OID
extremeWirelessClientID The Unique MAC Address of the station for which this address table entry pertains.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1916.1.25.1.11.1.1
extremeWirelessClientState This attribute shall indicate the current state of the connection between a wireless station and the AP. The attribute is enumerated as follows: 1 - Detected - station has been detected, but not is commu…	Enumeration Enumerated Values: 1 detected 2 authenticated 3 associated 4 data-forwarding	.1.3.6.1.4.1.1916.1.25.1.11.1.2
extremeWirelessClientEncryption This attribute is contains the encryption mechanism being used by the station in an AP that allows mixed encryption modes.	EXTREME-BASE-MIBWPACipherSet Type Values: 0 none 1 wep64 2 tkip 3 wrap 4 ccmp 5 wep128 6 other	.1.3.6.1.4.1.1916.1.25.1.11.1.3
extremeWirelessClientSignalStrength This attribute shall specify the signal strength of the last frame received from the station in - dBm. e.g. a value of 50 implies -50 dBm.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.1916.1.25.1.11.1.4
extremeWirelessClientLinkQuality This attribute shall contain an indication of the quality of the signal as measured in the last frame received from the station. TBD format of this attribute	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.1916.1.25.1.11.1.5
extremeWirelessClientVLAN This is the per-client VLAN which was pushed over by a RADIUS server or other mechanism.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.11.1.6
extremeWirelessClientPriority This is a per-client 802.1p value which was either configured by the RADIUS server or statically through the port configuration table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.11.1.7
extremeWirelessClientAuthType This is an indication of what access method was used to authenticated the client. The strongest mechanism used should be listed here, in case more than one was used. For example, if a combination of mac-based shared-…	EXTREME-BASE-MIBClientAuthType Type Values: 0 none 1 open 2 wep 3 mac-based 4 dot1x 5 wpa-psk 6 web-based 7 wpa2 8 wpa 9 wpa2-psk	.1.3.6.1.4.1.1916.1.25.1.11.1.8
extremeWirelessClientLastStateChangeTime This is the sysUpTime of the switch when the clients state changed last	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.11.1.9
extremeWirelessClientTxFrames This is the number of packets transmitted to the client	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.11.1.10
extremeWirelessClientRxFrames This is the number of packets transmitted by the client	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.11.1.11
extremeWirelessClientTxBytes This is the number of bytes transmitted to the client	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1916.1.25.1.11.1.12
extremeWirelessClientRxBytes This is the number of bytes transmitted by the client	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1916.1.25.1.11.1.13
extremeWirelessClientLastPacketType This the the last packet type seen from the specific client	Enumeration Enumerated Values: 0 data 1 psPoll 2 probeRequest 3 disassociation 4 deauthentication 5 association 6 reassociation 7 authentication	.1.3.6.1.4.1.1916.1.25.1.11.1.14
extremeWirelessClientSSID The SSID that this client was using	OctetString	.1.3.6.1.4.1.1916.1.25.1.11.1.15
extremeWirelessClientStatus This variable is used to delete an entry from the table. The only value this can be set to, is delete (6). If an entry is deleted, that is already in Associated or data-forwarding state, then the AP shou…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1916.1.25.1.11.1.16
extremeWirelessClientIP IP Address of the wireless client.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1916.1.25.1.11.1.17
extremeWirelessClientUsername Username (if any) of the wireless client.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1916.1.25.1.11.1.18
extremeWirelessClientDecryptionFailures This is the number of failures during decrypting packets from this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.11.1.19
extremeWirelessClientMICFailures This is the number of MIC failures for this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.11.1.20

This table is proxied by the wireless APs.  It 
allows the wireless concentrator to configure the 
APs security settings.

extremeAPAuthServerEntry row .1.3.6.1.4.1.1916.1.25.1.12.1

Indexes

extremeWirelessPortIfIndex extremeAPAuthServerIndex

Column	Syntax	OID
extremeAPAuthServerIndex Integer representing either primary (1) or backup (2) server.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.1916.1.25.1.12.1.1
extremeAPAuthServerAddressType The type of address specified in the object 'extremeAuthServerAddress'. Currently, only 'ipv4' and 'dns' are supported.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.1916.1.25.1.12.1.2
extremeAPAuthServerAddress IP address of the radius server. The act of assigning an IP address enables the client to use the server. Setting this value to 0.0.0.0 disables this entry.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.1916.1.25.1.12.1.3
extremeAPAuthServerPort The UDP port number of the remote syslog server to which syslog messages will be sent.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1916.1.25.1.12.1.4
extremeAPAuthServerSecret This is the shared secret between the Authenticator and radius server. This is logically write-only.	OctetStringr/w	.1.3.6.1.4.1.1916.1.25.1.12.1.5
extremeAPAuthServerReTransmit This is the timeout in seconds after which the Authenticator will re transmit requests to the radius server.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.12.1.6
extremeAPAuthServerStatus Specifies whether the DNS entry is in use or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.12.1.7

This table contains one entry per wireless interface.  It
allows for configuration of active and passive scan
parameters.

extremeWirelessScanCfgEntry row .1.3.6.1.4.1.1916.1.25.1.24.1

Indexes

IF-MIBifIndex

Column	Syntax	OID
extremeWirelessScanEnable By setting this to true the wireless interface will collect information from beacons and (possible) probe responses. If this value is set to false this information will not be collected.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.24.1.1
extremeWirelessScanSendProbe If this value is set to TRUE the wireless interface will send probe requests to the broadcast SSID every ProbeInterval. The results of these probes will be recorded in the scan results table. If this is false, the AP …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.24.1.2
extremeWirelessScanProbeInterval This allows for the configuration of the interval over which probe requests will be sent.	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.24.1.3
extremeWirelessScanResultTableSize This parameter permits the configuration of the result table size. If there are more entries discovered than there are room for the new entry will replace the oldest entry in the table. In this case a new entry trap …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.24.1.4
extremeWirelessScanResultTimeout By default the scan result table will age out entries which haven't been updated for some time. When an entry is aged out of the table a scanResultAgeOut trap is generated. Setting this value to 0 will disable the ag…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.24.1.5
extremeWirelessScanResetStats Setting this to TRUE will cause the scan module to reset its internal statistics, as well as the packet counts for each entry in the scan results table. It will *not* remove any entries in the scan table.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.24.1.6
extremeWirelessScanClearTable Setting this to TRUE will cause the scan module to reset its internal table. All currently detected stations will be removed. Scan statistics (i.e. watermark) will not be reset.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.24.1.7
extremeWirelessScanSendAPAddedTrap Setting this to TRUE will cause the scan module to send a trap whenever a new entry is added to the scan results table. If this value is false the scan module will suppress the trap.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.24.1.8
extremeWirelessScanSendAPRemovedTrap Setting this to TRUE will cause the scan module to send a trap whenever an entry is removed from the scan results table.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.24.1.9
extremeWirelessScanSendAPUpdatedTrap Setting this to TRUE will cause the scan module to send a trap whenever an entry is updated in the scan results table. This will happen if the list of IEs sent from a particular MAC address changes.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.24.1.10

This table contains one entry per wireless interface.  It
allows for configuration of off-channel scan.  To start an
off-channel scan the management station should write values
for channel list, min and max wait.  Toggling the start
value at this point will start an off-channel scan, unless
one is already running.
Results of the off-channel scan are reported to the scan
results table together with the results of passive scan.

extremeWirelessOffChannelScanCfgEntry row .1.3.6.1.4.1.1916.1.25.1.25.1

Indexes

IF-MIBifIndex

Column	Syntax	OID
extremeWirelessOffChannelScanStart Setting this to TRUE will cause the scan module to start an off-channel scan. The radio will be disabled for the duration of the scan. The scan module will change to each of the specified channels in order. It will…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.25.1.1
extremeWirelessOffChannelScanList This value controls the channels which will be scanned during the off-channel scan. Two special values should be noted: all - causes the radio to scan all channels supported by the configured c…	Bitsr/w Enumerated Values: 0 scanAll 1 scanEvery 2 scanChannel1 3 scanChannel2 4 scanChannel3 5 scanChannel4 6 scanChannel5 7 scanChannel6 8 scanChannel7 9 scanChannel8 10 scanChannel9 11 scanChannel10 12 scanChannel11 13 scanChannel12 14 scanChannel13 15 scanChannel14 16 scanChannel34 17 scanChannel36 18 scanChannel40 19 scanChannel44 20 scanChannel48 21 scanChannel52 22 scanChannel56 23 scanChannel60 24 scanChannel64 25 scanChannel100 26 scanChannel104 27 scanChannel108 28 scanChannel113 29 scanChannel116 30 scanChannel120 31 scanChannel124 32 scanChannel128 33 scanChannel132 34 scanChannel140 35 scanChannel149 36 scanChannel153 37 scanChannel157 38 scanChannel161 39 scanChannel165	.1.3.6.1.4.1.1916.1.25.1.25.1.2
extremeWirelessOffChannelScanMinWait This value controls the minimum time the off-channel scan will wait on a particular channel if it doesn't see any traffic.	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.25.1.3
extremeWirelessOffChannelScanMaxWait This value controls the maximum time the off-channel scan will wait on a particular channel even if it is receiving beacons etc.	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.25.1.4
extremeWirelessOffChannelContinuous Setting this value to true results in the off-channel scan looping on the configured values until the channel scan is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.25.1.5

This table contains one entry per wireless interface.  It
provides status and statistics information for the scan 
feature operating on that wireless interface.

extremeWirelessScanStatusEntry row .1.3.6.1.4.1.1916.1.25.1.26.1

Indexes

IF-MIBifIndex

Column	Syntax	OID
extremeWirelessScanCurrentTableSize This indicates the current number of entries in the scan results table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.26.1.1
extremeWirelessScanTableWatermark This indicates the largest size the results table has reached since the status values have been reset, or the system has booted.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.26.1.2
extremeWirelessScanTotalOverflows This gives the total number of entries which have been removed to make room for a newer entry. This should be equal to the number of AP added traps the system has generated with the overflow value set to true.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.26.1.3
extremeWirelessScanTotalTimeouts This gives the total number of entries which have been removed because they have become stale. This should be equal to the number of AP removed traps sent by the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.26.1.4
extremeWirelessScanOffChannelRunning If this value is true it indicates that an off-channel scan is currently running. This implies that the radio is current disabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.26.1.5
extremeWirelessScanCurrentChannel If the value of extremeWirelessScanOffChannelRunning is true this variable give the value of the current channel the AP is scanning on. If a scan is not running, the value of this variable is undefined.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.26.1.6
extremeWirelessScanLastElement This gives the sysUpTime when the last new station was inserted in the results table.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.26.1.7
extremeWirelessScanNumProbes This gives the number of probe requests sent by this wireless interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.26.1.8

This table contains one entry per wireless interface.  It
provides status and statistics information for the scan 
feature operating on that wireless interface.

extremeWirelessScanResultsEntry row .1.3.6.1.4.1.1916.1.25.1.27.1

Indexes

IF-MIBifIndex extremeWirelessScanResultsStationId

Column	Syntax	OID
extremeWirelessScanResultsStationId This is the MAC address of the detected station.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1916.1.25.1.27.1.1
extremeWirelessScanResultsFirstSeen This gives the sysUpTime when this station entry was created.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.27.1.2
extremeWirelessScanResultsLastChange This gives the sysUpTime of the station entry the last time it was updated (i.e. a beacon etc was received).	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.27.1.3
extremeWirelessScanResultsPacketTime This gives the timestamp field from the last beacon/probe response received from this station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.27.1.4
extremeWirelessScanResultsPacketRate This gives the rate at which the last packet was sent by the station. TODO: What are the units here on rate?	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.27.1.5
extremeWirelessScanResultsChannel This gives the channel the last packet received by this station was recieved on.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.27.1.6
extremeWirelessScanResultsMinRSS This is the smallest RSS value of any packet recieved from this station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.27.1.7
extremeWirelessScanResultsMaxRSS This is the largest RSS value of any packet recieved from this station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.27.1.8
extremeWirelessScanResultsAvgRSS This is a running average of RSS values of all the packets received from this station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.27.1.9
extremeWirelessScanResultsTotalBeacons This counter gives the total number of beacons received from this station.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.27.1.10
extremeWirelessScanResultsTotalProbes This counter gives the total number of probe responses received from this station.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.27.1.11
extremeWirelessScanResultsDiscoveredBy This gives the type of packet which cause this results entry to be created.	Enumeration Enumerated Values: 1 probe 2 beacon	.1.3.6.1.4.1.1916.1.25.1.27.1.12
extremeWirelessScanResultsDSSOFDM TODO : What is this?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.13
extremeWirelessScanResultsRSNEnabled Indicates if RSN capabilities are enabled on the sending station.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.14
extremeWirelessScanResultsGShortSlot TODO : What is this?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.15
extremeWirelessScanResultsChannelAgility TODO : What is this?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.16
extremeWirelessScanResultsPBCC TODO : What is this?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.17
extremeWirelessScanResultsPreamble TODO : What is this?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.18
extremeWirelessScanResultsPrivacy This is true if MAC-based privacy is invoked on the sending station.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.19
extremeWirelessScanResultsCFPollReq TODO: What is this?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.20
extremeWirelessScanResultsCFPollable TODO: What is this?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.21
extremeWirelessScanResultsNetworkType This indicates what type of network it is. If this value is IBSS the last beacon/probe response was sent by a host operating in ad-hoc mode.	Enumeration Enumerated Values: 1 ibss 2 bss	.1.3.6.1.4.1.1916.1.25.1.27.1.22
extremeWirelessScanResultsSSID This provides the value of the SSID value as is was recieved in the beacon or probe response. If no SSID was sent in the probe this value is NULL.	OctetString	.1.3.6.1.4.1.1916.1.25.1.27.1.23
extremeWirelessScanResultsRateSet This provides the value of the rate set IE as it was received in the beacon or probe response. If no rate set was recieved then this value is NULL.	OctetString	.1.3.6.1.4.1.1916.1.25.1.27.1.24
extremeWirelessScanResultsExtRateSet This provides the value of the extended rate set IE as it was received in the beacon or probe response. If no rate set was recieved then this value is NULL.	OctetString	.1.3.6.1.4.1.1916.1.25.1.27.1.25
extremeWirelessScanResultsDSSParameter Provides the value of the DSS parameter IE, which is the channel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.27.1.26
extremeWirelessScanResultsTIMCount TODO: What is this?	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.27.1.27
extremeWirelessScanResultsTIMPeriod TODO: What is this?	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.27.1.28
extremeWirelessScanResultsTIMTrafficInd TODO: What is this?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.29
extremeWirelessScanResultsCountryCode Value of country code supplied by the IE	OctetString	.1.3.6.1.4.1.1916.1.25.1.27.1.30
extremeWirelessScanWPAIEPresent If this value is true it indicates that WPA information was gathered from this AP in the last beacon. It implies that the WPA variables below are valid. If this value is false it indicates that this AP did not send a …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.27.1.31
extremeWirelessScanWPAVersion This value gives the version of WPA supported by this AP. See IEEE 802.11i Draft 3.0 section 7 for meaning of various values.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.27.1.32
extremeWirelessScanWPAIEMcastCipher This value gives the single multicast cipher supported by this AP.	EXTREME-BASE-MIBWPACipherSet Type Values: 0 none 1 wep64 2 tkip 3 wrap 4 ccmp 5 wep128 6 other	.1.3.6.1.4.1.1916.1.25.1.27.1.33
extremeWirelessScanWPAUcastCipherCount This value gives the total number of unicast ciphers supported by this AP. It corresponds to the number of bits set in the extremeWirelessScanWPAUcastCipher variable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.27.1.34
extremeWirelessScanWPAUcastCipher This gives the list of cipher suites which are supported by this AP.	EXTREME-BASE-MIBWPACipherSet Type Values: 0 none 1 wep64 2 tkip 3 wrap 4 ccmp 5 wep128 6 other	.1.3.6.1.4.1.1916.1.25.1.27.1.35
extremeWirelessScanWPAKeyMgmtCount This gives the number of key-management schemes supported by this AP. It corresponds to the number of bits set in the extremeWirelessScanWPAKeyMgmtSuite variable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.27.1.36
extremeWirelessScanWPAKeyMgmtSuite This indicates the supported key-management suites supported by this AP.	EXTREME-BASE-MIBWPAKeyMgmtSet Type Values: 0 none 1 dot1x 2 psk	.1.3.6.1.4.1.1916.1.25.1.27.1.37
extremeWirelessScanResultsIEBlob All the IEs received in the last packet encoded as a blob of Type, Length, Value tuples.	OctetString	.1.3.6.1.4.1.1916.1.25.1.27.1.38

This table contains one entry per physical and virtual interface.
It controls the collection of client information via PROBE REQ
packets.

extremeWirelessProbeInfoCfgEntry row .1.3.6.1.4.1.1916.1.25.1.28.1

Note that the ifIndex here can be either a physical or virtual
wireless interface index.

Indexes

IF-MIBifIndex

Column	Syntax	OID
extremeWirelessProbeInfoEnable If this is set to TRUE then this virtual or physical interface will register with the MAC layer to receive notification of PROBE REQ packets. In the case of a virtual interface this implies the receipt of directed PRO…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.28.1.1
extremeWirelessProbeInfoKeepIEs If this value is set to TRUE then the rate IE which is carried in the PROBE REQ packet will be recorded. If FALSE, no rate information will be kept.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.28.1.2
extremeWirelessProbeInfoTableSize This value sets the maximum size of the probe info results table, which limits the number of clients this AP can record PROBE REQ information from.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.28.1.3
extremeWirelessProbeInfoTimeout This is the timeout, in seconds, for an entry in the probe info table. Once a PROBE REQ has not been heard from a client in this time period, it's entry is removed. The value 0 is a sentinel, indicating no timeout.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.28.1.4
extremeWirelessProbeInfoTableClear Setting this value to TRUE causes all entries in the probe info table to be removed. Reading this value has no meaning.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.28.1.5
extremeWirelessProbeInfoSourceClear Setting this to the value of some MAC address results in any matching MAC address in the probe info table being removed. Reading this value has no meaning.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1916.1.25.1.28.1.6
extremeWirelessProbeInfoTableStatsClear Setting this to TRUE results in all historical statistics in the probe info table being set to 0. No entries will be removed. Reading this has no meaning.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.28.1.7
extremeWirelessProbeInfoSourceStatsClear Setting this to a MAC address will clear the historical stats associated with the matching MAC address in the probe info table. Reading this has no meaning.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1916.1.25.1.28.1.8
extremeWirelessProbeInfoSendAddedTrap Setting this to TRUE will cause the management module to send a trap whenever a new PROBE REQ source is added to the probe info table. Setting this to FALSE will suppress the trap.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.28.1.9
extremeWirelessProbeInfoSendRemovedTrap Setting this to TRUE will cause the management module to send a trap whenever a PROBE REQ source is removed from the probe info table. Setting this to false will suppress the trap.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.28.1.10

This table contains one entry per physical and virtual interface.
It gives debugging and status information for the operation of the
probe info feature on that interface.

extremeWirelessProbeInfoStatusEntry row .1.3.6.1.4.1.1916.1.25.1.29.1

Note that the ifIndex here can be either a physical or virtual
wireless interface index.

Indexes

IF-MIBifIndex

Column	Syntax	OID
extremeWirelessProbeInfoStatusCurrentTableSize This gives the current number of entries in the probe info table for this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.29.1.1
extremeWirelessProbeInfoStatusWatermark This is the maximum size the probe info table has been since the statistics have been reset.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.29.1.2
extremeWirelessProbeInfoStatusTotalOverflows This gives the number of times an entry in the probe info table was overwritten because the table was full.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.29.1.3
extremeWirelessProbeInfoStatusTotalTimeouts This gives the number of times an entry in the probe info table was timed out.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.29.1.4
extremeWirelessProbeInfoStatusLastElement This gives the sysUpTime the last time an entry was added to the probe info table (or modified).	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.29.1.5
extremeWirelessProbeInfoStatusTotalProbes This gives the total number of PROBE REQ packets that this interface has gotten.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.29.1.6

This table contains one entry for each source MAC from which
a PROBE REQ packet has been received.  Entries are added when
a packet is recieved from a new source mac.  Entries are 
removed via management action, or by timeout or overflow.

extremeWirelessProbeInfoEntry row .1.3.6.1.4.1.1916.1.25.1.30.1

Note that the ifIndex here can be either a physical or virtual
wireless interface index. In addition, this table is indexed
by the MAC address of the PROBE REQ source.

Indexes

IF-MIBifIndex extremeWirelessProbeInfoSource

Column	Syntax	OID
extremeWirelessProbeInfoSource This is the MAC address of the source which sent us the PROBE REQ packets described by this entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1916.1.25.1.30.1.1
extremeWirelessProbeInfoTotalProbes This gives the total number of PROBE REQ packets we have received from this source since the last time the stats were cleared.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.30.1.2
extremeWirelessProbeInfoTotalProbeResp This gives the total number of PROBE RESP packets we have sent to this source. This may not be equal to PROBE REQ based on rxmit, misses, etc.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.30.1.3
extremeWirelessProbeInfoRateIESize This gives the size of the rate-ie field in bytes. This may be 0, at which point there is no rate-ie.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.30.1.4
extremeWirelessProbeInfoRateIE This gives the rate IE as recieved in the last PROBE REQ packet. It is encoded as a TLV exactly as it was in the frame. This field may return NULL if storing of rate IE fields is disabled.	OctetString	.1.3.6.1.4.1.1916.1.25.1.30.1.5
extremeWirelessProbeInfoFirstSeen This gives the sysUpTime the first time a PROBE REQ was seen from this source.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.30.1.6
extremeWirelessProbeInfoLastChange This gives the sysUpTime the last time a PROBE REQ was seen from this source.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.30.1.7
extremeWirelessProbeInfoLastRSS This gives the RSSI from the last PROBE REQ packet received from this station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.30.1.8
extremeWirelessProbeInfoLastRate This gives the rate at which the last packet was received from this station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.30.1.9
extremeWirelessProbeInfoLastChannel This gives the channel on which the last PROBE REQ from this station was heard. PROBE REQs may be heard during an off-channel scan, at which point this may not be equal to the current channel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.30.1.10

This table contains one row per wireless interface.  Each row
contains configuration values for collection of per-client
diagnostic information.

extremeWirelessClientDiagCfgEntry row .1.3.6.1.4.1.1916.1.25.1.31.1

There is one entry in this table per virtual interface
(SSID).

Indexes

IF-MIBifIndex

Column	Syntax	OID
extremeWirelessClientDiagCfgEnable Setting this to TRUE enables the collection of historical information on this virtual interface. This implies that stations which send ASSOC or AUTH packets will have new entries created in the table for this interf…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.31.1.1
extremeWirelessClientDiagCfgClearClient Setting this to the MAC address of a client in the diag tables will clear the counters for that client. The entry will not be removed from the table, but all summation counters will be cleared.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1916.1.25.1.31.1.2
extremeWirelessClientDiagCfgTableSize This value will configure the maximum size of the diag table. The value is specified in number of entries. A value of 0 implies no upper limit.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.31.1.3
extremeWirelessClientDiagCfgTimeout This value will configure the timeout of an entry from the diagnostics tables. The value is given in seconds. A value of 0 implies no timeout.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.31.1.4

This table contains one entry per virtual interface.  Values
stored here give current status of the historical client diag
feature.

extremeWirelessClientDiagStatusEntry row .1.3.6.1.4.1.1916.1.25.1.32.1

Note that ifIndex here is virtual ifIndex (SSID).

Indexes

IF-MIBifIndex

Column	Syntax	OID
extremeWirelessClientDiagCurrentTableSize This is the current size, in entries of the client diag tables.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.32.1.1
extremeWirelessClientDiagTableWatermark This is the maximum size the client diag table has been since the last time the statistics were cleared.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.32.1.2
extremeWirelessClientDiagTotalOverflows This is the total number of times an entry has been replaced by a newer entry because there was no room left in the table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.32.1.3
extremeWirelessClientDiagTotalTimeouts This is the total number of times an entry has been aged-out of the table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.32.1.4
extremeWirelessClientDiagLastElement This is sysUpTime when the last entry was added to the table.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.32.1.5
extremeWirelessClientDiagSupportsSpeedCounters This value indicates if this AP supports the speed-based counters from the extremeWirelessClientSpeedCountersTable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.32.1.6
extremeWirelessClientDiagSupportsSizeCounters This value indicates if this AP supports the size-based counters from the extremeWirelessClientMACSizeCounterTable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.32.1.7
extremeWirelessClientDiagSupportsPacketCounters This value indicates if this AP supports the packet-based counters from the extremeWirelessClientPacketCountersTable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.25.1.32.1.8

This table contains information on a per-client basis.  Rows are
indexed first by virtual interface, then by client MAC.

extremeWirelessClientDiagEntry row .1.3.6.1.4.1.1916.1.25.1.33.1

Note that ifIndex here is virtual ifIndex (SSID).

Indexes

IF-MIBifIndex extremeWirelessClientDiagMac

Column	Syntax	OID
extremeWirelessClientDiagMac This is the MAC address of the station this entry describes.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1916.1.25.1.33.1.1
extremeWirelessClientDiagStateWatermark This is the highest state this client has been in.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.25.1.33.1.2
extremeWirelessClientDiagEntersInDetected This is the total number of times the client has entered the detected state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.3
extremeWirelessClientDiagErrorsInDetected This is the total number of errors this client has experienced since the counters were cleared.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.4
extremeWirelessClientDiagAuthReqInDetected This is the total number of AUTH REQ packets received from this client while it was in the detected state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.5
extremeWirelessClientDiagOtherReqInDetected This is the total number of REQ packets received from this client while it was in detected state that were not AUTH REQ packets.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.6
extremeWirelessClientDiagMgmtActionInDetected This is the total number of times management initiated action (i.e. force-disassociate) was received for this client in the detected state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.7
extremeWirelessClientDiagTimeOutInDetected This is the total number of timeouts which happened to this client in the detected state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.8
extremeWirelessClientDiagEntersInAuth This is the total number of times the client has entered the AUTHED state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.9
extremeWirelessClientDiagErrorsInAuth This is the total number of times the client has had errors in the AUTHED state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.10
extremeWirelessClientDiagAssocReqInAuth This is the total number of ASSOC REQ or REASSOC REQ packets received from this client while in the AUTHED state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.11
extremeWirelessClientDiagOtherReqInAuth This is the total number of non-ASSOC/REASSOC packets received from this client while in the AUTHED state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.12
extremeWirelessClientDiagMgmtActionInAuth This is the total number of management initiated action which this client experienced while in the AUTHED state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.13
extremeWirelessClientDiagTimeOutInAuth This is the total number of times this client timed out while in the authed state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.14
extremeWirelessClientDiagEntersInAssoc This is the total number of times this client has entered the associated state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.15
extremeWirelessClientDiagErrorsInAssoc This is the total number of errors this client has had in the associated state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.16
extremeWirelessClientDiagMgmtActionInAssoc This is the total number of management actions which have happened to this client in the associated state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.17
extremeWirelessClientDiagTimeOutInAssoc This is the total number of times this station has been timed-out in the associated state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.18
extremeWirelessClientDiagEntersInForward This is the total number of times this client has entered the forwarding state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.19
extremeWirelessClientDiagMgmtActionInForward This is the total number of times this client has experience a management action while in forwarding.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.20
extremeWirelessClientDiagTimeOutInForward This is the total number of timeouts this client has experienced while in forwarding.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.21
extremeWirelessClientDiagTotal802Auths This is the total number of times this client has tried to authenticate using 802.1x.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.22
extremeWirelessClientDiagTotalNetLoginAuths This is the total number of times this client has tried to authenticate using NetLogin.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.25.1.33.1.23