extremeWirelessPortBootstrapServerAddressType
EXTREME-WIRELESS-MIB ·
.1.3.6.1.4.1.1916.1.25.2.3.1.10
Object
The type of address specified in the object 'extremeWirelessPortBootstrapServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
Context
- MIB
- EXTREME-WIRELESS-MIB
- OID
.1.3.6.1.4.1.1916.1.25.2.3.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- extremeWirelessPortCfgEntry
- Table
- extremeWirelessPortCfgTable
- Siblings
- 18
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| extremeWirelessPortIfIndex This is the MIB-II ifIndex of the port this entry
describes. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.1916.1.25.2.3.1.1 |
| extremeWirelessPortBootstrapServerAddress This specifies the TFTP server address from where the AP gets the Bootstrap Image.
This can be a DNS name or an IPv4 address. | column | OctetString | .1.3.6.1.4.1.1916.1.25.2.3.1.11 |
| extremeWirelessPortBootstrapFilePath This specifies the TFTP FileName of the AP Bootstrap Image. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.2.3.1.12 |
| extremeWirelessPortBootLoaderServerAddressType The type of address specified in the object 'extremeWirelessPortBootLoaderServerAddress'.
Currently, only 'ipv4' and 'dns' are supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.1916.1.25.2.3.1.13 |
| extremeWirelessPortBootLoaderServerAddress This specifies the TFTP server address from where the AP gets the Bootloader Image.
This can be a DNS name or an IPv4 address. | column | OctetString | .1.3.6.1.4.1.1916.1.25.2.3.1.14 |
| extremeWirelessPortBootLoaderFilePath This specifies the TFTP FileName of the AP Bootloader Image. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.2.3.1.15 |
| extremeWirelessPortRuntimeServerAddressType The type of address specified in the object 'extremeWirelessPortRuntimeServerAddress'.
Currently, only 'ipv4' and 'dns' are supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.1916.1.25.2.3.1.16 |
| extremeWirelessPortRuntimeServerAddress This specifies the TFTP server address from where the AP gets the Runtime Image.
This can be a DNS name or an IPv4 address. | column | OctetString | .1.3.6.1.4.1.1916.1.25.2.3.1.17 |
| extremeWirelessPortRuntimeFilePath This specifies the TFTP FileName of the AP Runtime Image. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.2.3.1.18 |
| extremeWirelessPortMultiBootMode This is used to identify the image with which the AP boots up. This is enumerated as follows:
0 - a300 - This specifies that AP will bootup with Extreme's A300 image
1 - a-bp - Th… | column | Enumeration | .1.3.6.1.4.1.1916.1.25.2.3.1.19 |
| extremeWirelessPortCfgIpAddress This value is assigned to the port for external
management. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1916.1.25.2.3.1.2 |
| extremeWirelessPortCfgLocation This describes the physical location of the wireless
port. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1916.1.25.2.3.1.3 |
| extremeWirelessPortCfgDetectedTimeout This is the number of seconds a station can stay
in the detected station table without authenticating. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.1916.1.25.2.3.1.4 |
| extremeWirelessPortCfgClientWatchdog Setting this value to true will force the AP to
run a watch-dog process for system health. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.25.2.3.1.5 |
| extremeWirelessPortLastChange The value of sysUpTime when the port entered its last state | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.1916.1.25.2.3.1.6 |
| extremeWirelessPortState The current state of the wireless part of this port.
enabled : Port is actively looking for wireless
interfaces.
disabled : Port is administrat… | column | Enumeration | .1.3.6.1.4.1.1916.1.25.2.3.1.7 |
| extremeWirelessPortAntennaType This is the type of the Antenna for Detachable product.
For Altitude-2d series, further selection is available
through this variable. | column | ExtremeWirelessAntennaType | .1.3.6.1.4.1.1916.1.25.2.3.1.8 |
| extremeWirelessPortAntennaLocation This specifies the location the detachable antenna. | column | ExtremeWirelessAntennaLocation | .1.3.6.1.4.1.1916.1.25.2.3.1.9 |